Kaldek/rat-ratgdo

Issues

• Rato board feature request

  #113 opened 2 months ago by deepakkoirala
  0

• schematics/ratgdo open source_schem_v9.png incorrect pin numbers

  #110 opened 4 months ago by ggodkin
  0

• Only able to open and close door

  #109 opened 5 months ago by dig12345
  3

• Send command stop working until reboot

  #99 opened 4 months ago by nodiaque
  4

• 880LWM Issue

  #108 opened 4 months ago by njschwartz
  1

• Wall switch doesn’t work

  #101 opened 4 months ago by thadude3
  1

• 8010 w/ (2) 2N7000 not working

  #107 opened 4 months ago by dubstomp
  1

• Issue with new v2.5 Board and Security 1.0+

  #98 opened 4 months ago by dolfelt
  15

• Install Requirements section needs updated

  #103 opened 7 months ago by glen4cindy
  1

• Garage Door Opens but does not close

  #100 opened 9 months ago by Stuart5851
  3

• Support for other terminals for switches? (updated: board build question)

  #74 opened a year ago by youaintnobody
  18

• Any interest in my "man in the middle" solution for Sec+ 1.0 and 0x37 wall control?

  #76 opened 10 months ago by mcomer-captech
  28

• 2.5i in hand!

  #80 opened 10 months ago by mikekay1
  3

• Overhead door compatability

  #82 opened 10 months ago by mikedhanson
  5

• Update/Advice - Power for ESP board

  #84 opened 10 months ago by jjarboe01
  2

• WT32-ETH01 Compatibility

  #86 opened 10 months ago by sanjay900
  5

• Request to Open the Discussions Section

  #87 opened 10 months ago by foreverimagining
  1

• Sync Status

  #89 opened 10 months ago by ur7x
  3

• not working with the code

  #90 opened 10 months ago by denveronly
  4

• Made two, one works 100%, other only basic functions works

  #91 opened 10 months ago by ashishgururani
  9

• [Solved] Issues with a Chamberlain ML700EV GDO and breadboard draft

  #88 opened a year ago by CodeFinder2
  6

• Intermittent comms?

  #83 opened a year ago by youaintnobody
  15

• Security+ 1.0 and 2.0 installer

  #85 opened a year ago by jrsphoto
  1

• Another product available: Gelidus Research AC Powered RATGDO Compatible Board

  #81 opened a year ago by rlowens
  13

• Insteon/X10 Interference

  #77 opened a year ago by powersra
  2

• One board is controlling both doors

  #78 opened a year ago by Heinouser
  6

• Adding support for ESP32-H2

  #68 opened a year ago by conradopoole
  5

• Is it possible to provide a project on PCBWay?

  #70 opened a year ago by sarvesh-lad
  0

• Permissions

  #71 opened a year ago by CarlKnox
  5

• Just sharing a "retail" ratgdo product

  #79 opened a year ago by youaintnobody
  4

• Need help troubleshooting board

  #72 opened a year ago by cwesterfield
  2

• Adding support for 2MB and 4MB flash devices in the esphome-ratgdo repo

  #67 opened a year ago by Kaldek
  2

• Now have a v2.5 in hand for references

  #44 opened a year ago by foreverimagining
  56

• No issue. Just wanted to display my working board. Thank you!

  #65 opened a year ago by thauch
  2

• Errors when adopting to esphome dash board

  #69 opened a year ago by demfam
  1

• Error: ESP does not have enough space to store OTA file.

  #66 opened a year ago by williamcwallis
  3

• Wall panel occasionally loses its time setting

  #60 opened a year ago by kaechele
  9

• (2)2n7000 with wemos d1 mini no RX on 8500W sec2.0

  #52 opened a year ago by hobbyist2
  13

• Bill of materials for schematics folders

  #58 opened a year ago by Guy559
  1

• ESP32 WROOM

  #57 opened a year ago by dragosde
  3

• POE?

  #59 opened a year ago by benrabicoff
  9

• Thanks! The latest KiCAD ESP8266 with additional resistors works!

  #63 opened a year ago by russgmoore
  2

• Wall switch goes dark

  #53 opened a year ago by dpeart
  2

• ESPHome automated OTA - does it work on ESP32?

  #64 opened a year ago by Kaldek
  3

• (2)2n7000 with wemos d1 mini no TX

  #61 opened a year ago by sambeetm
  1

• Wemos D1 mini, circuit checked hundreds of times, still wont connect

  #54 opened a year ago by mikekay1
  18

• I can read the door status, but not control it

  #47 opened a year ago by dpeart
  10

• using a raspberry pi pico w

  #51 opened a year ago by godmar
  2

• What is the current status of this work?

  #48 opened a year ago by antamy
  2

• IMPORTANT!!! - PCB boards/gerber files for all boards except D1 mini - 8266 prior to 11/17/23 have White and Black silkscreen swapped!

  #46 opened a year ago by bjhiltbrand
  2