Building a camera for photography with the Raspberry Pi HQ Camera module.
The install process is based on the process provided by Waveshare for the 1.44in LCD HAT. https://www.waveshare.com/wiki/1.44inch_LCD_HAT
- Install RaspberryOS lite 64bit
- clone the Git repo
- enable SPI interface in raspi-config
sudo raspi-config
- add executable permission to setup.sh
sudo chmod +x setup.sh
- run setup.sh
./setup.sh
- Increase memory allocated to the GPU by adding "gpu_mem=256" at the end of /boot/config.txt