/Torrent_2_Gdrive_mirrorbot-kpz

Primary LanguagePythonGNU General Public License v3.0GPL-3.0

Slam

owner of this repo :- AYUSH

all the commits are made from slam-mirrorbot

all the credit goes to slamDevs

contact me :- AYUSH

Slam Mirror Bot

This is a telegram bot writen in python for mirroring files on the internet to our beloved Google Drive.

Deploying on Heroku

Give Star & Fork this repo, then upload token.pickle & credentials.json to your forks

after this click on the below button 👇👇👇👇

Deploy to Heroku

Features supported:

  • Mirroring direct download links to Google Drive
  • qBittorrent supported
  • selection of files before downloading torrent
  • Limiting size Torrent/Direct, Tar/Unzip, Mega, cloning Google Drive support
  • Stop duplicate cloning Google Drive & mirroring Mega support
  • Create Tar Google Drive folder
  • Mirroring Mega.nz links to Google Drive (In development stage)
  • Mirroring Uptobox.com links to Google Drive (Uptobox account must be premium)
  • Copy files from someone's drive to your drive (Using Autorclone)
  • Download/upload progress, speeds and ETAs
  • Docker support
  • Uploading To Team Drives.
  • Index Link support
  • Service account support
  • Heroku config support
  • Extracting tar.xz support
  • Mirror all youtube-dl supported links
  • Stop duplicate cloning Google Drive & mirroring Mega support
  • Limiting size Torrent/Direct, Mega, cloning Google Drive support
  • Mirror telegram files
  • Delete files from drive
  • Check Heroku dynos stats
  • Nyaa.si and Sukebei Torrent search
  • Shell and Executor
  • Shortener support
  • Custom Buttons
  • Custom Filename (Only for url, telegram files and ytdl. Not for mega links and magnet/torrents)
  • Speedtest with picture results
  • Extracting password protected files and using custom filename see these examples:
  • custom file name examples
  • Bot can extract the following types of files
ZIP, RAR, TAR, 7z, ISO, WIM, CAB, GZIP, BZIP2, 
APM, ARJ, CHM, CPIO, CramFS, DEB, DMG, FAT, 
HFS, LZH, LZMA, LZMA2, MBR, MSI, MSLZ, NSIS, 
NTFS, RPM, SquashFS, UDF, VHD, XAR, Z.

How to deploy on vps ?

Deploying is pretty much straight forward and is divided into several steps as follows:

Installing requirements

  • Clone this repo:
git clone https://github.com/ayushteke/slam_aria_mirror_bot_HEROKU/
cd slam_aria_mirror_bot_HEROKU
  • Install requirements For Debian based distros
sudo apt install python3
sudo snap install docker
  • For Arch and it's derivatives:
sudo pacman -S docker python

Setting up config file

Click here for more details 
cp config_sample.env config.env
  • Remove the first line saying:
_____REMOVE_THIS_LINE_____=True

Fill up rest of the fields. Meaning of each fields are discussed below:

Required Field

  • BOT_TOKEN: The Telegram bot token that you get from @BotFather
  • TELEGRAM_API: This is to authenticate to your Telegram account for downloading Telegram files. You can get this from https://my.telegram.org DO NOT put this in quotes.
  • TELEGRAM_HASH: This is to authenticate to your Telegram account for downloading Telegram files. You can get this from https://my.telegram.org
  • OWNER_ID: The Telegram user ID (not username) of the Owner of the bot
  • DATABASE_URL: Your Database URL. See Generate Database to generate database. (NOTE: If you deploying on Heroku using Heroku button, no need to generate database manually, because it will automatic generate database when first deploying)
  • GDRIVE_FOLDER_ID: This is the folder ID of the Google Drive Folder to which you want to upload all the mirrors.
  • DOWNLOAD_DIR: The path to the local folder where the downloads should be downloaded to
  • DOWNLOAD_STATUS_UPDATE_INTERVAL: A short interval of time in seconds after which the Mirror progress message is updated. (I recommend to keep it 5 seconds at least)
  • AUTO_DELETE_MESSAGE_DURATION: Interval of time (in seconds), after which the bot deletes it's message (and command message) which is expected to be viewed instantly. (Note: Set to -1 to never automatically delete messages)
  • UPSTREAM_REPO: Link for Bot Upstream Repo, if you want default update, fill https://github.com/breakdowns/slam-mirrorbot.
  • UPSTREAM_BRANCH: Branch name for Bot Upstream Repo (Recommended using master branch)

Optional Field

  • AUTHORIZED_CHATS: Fill user_id and chat_id of you want to authorize.
  • IS_TEAM_DRIVE: Set to True if GDRIVE_FOLDER_ID is from a Team Drive else False or Leave it empty.
  • USE_SERVICE_ACCOUNTS: (Leave empty if unsure) Whether to use Service Accounts or not. For this to work see Using service accounts section below.
  • INDEX_URL: Refer to https://github.com/ParveenBhadooOfficial/Google-Drive-Index The URL should not have any trailing '/'
  • MEGA_API_KEY: Mega.nz api key to mirror mega.nz links. Get it from Mega SDK Page
  • MEGA_EMAIL_ID: Your email id you used to sign up on mega.nz for using premium accounts (Leave th)
  • MEGA_PASSWORD: Your password for your mega.nz account
  • BLOCK_MEGA_FOLDER: If you want to remove mega.nz folder support, set it to True.
  • BLOCK_MEGA_LINKS: If you want to remove mega.nz mirror support, set it to True.
  • STOP_DUPLICATE_MIRROR: (Leave empty if unsure) if this field is set to True, bot will check file in Drive, if it is present in Drive, downloading will be stopped. (Note: File will be checked using filename, not using filehash, so this feature is not perfect yet)
  • STOP_DUPLICATE_MEGA: (Leave empty if unsure) if this field is set to True, bot will check file in Drive, if it is present in Drive, downloading Mega will be stopped.
  • STOP_DUPLICATE_CLONE: (Leave empty if unsure) if this field is set to True, bot will check file in Drive, if it is present in Drive, cloning will be stopped.
  • CLONE_LIMIT: To limit cloning Google Drive (leave space between number and unit, Available units is (gb or GB, tb or TB).
  • MEGA_LIMIT: To limit downloading Mega (leave space between number and unit, Available units is (gb or GB, tb or TB).
  • TORRENT_DIRECT_LIMIT: To limit the Torrent/Direct mirror size, Leave space between number and unit. Available units is (gb or GB, tb or TB).
  • IMAGE_URL: Show Image/Logo in /start message. Fill value of image your link image, use telegra.ph or any direct link image.
  • VIEW_LINK: View Link button to open file Index Link in browser instead of direct download link, you can figure out if it's compatible with your Index code or not, open any video from you Index and check if the END of link from browser link bar is ?a=view, if yes make it True it will work (Compatible with Bhadoo Index Code)
  • UPTOBOX_TOKEN: Uptobox token to mirror uptobox links. Get it from Uptobox Premium Account.
  • HEROKU_API_KEY: (Only if you deploying on Heroku) Your Heroku API key, get it from https://dashboard.heroku.com/account.
  • HEROKU_APP_NAME: (Only if you deploying on Heroku) Your Heroku app name.
  • IGNORE_PENDING_REQUESTS: (Optional field) If you want the bot to ignore pending requests after it restarts, set this to True.
  • SHORTENER_API: Fill your Shortener api key if you are using Shortener.
  • SHORTENER: if you want to use Shortener in Gdrive and index link, fill Shortener url here. Examples:
exe.io, gplinks.in, shrinkme.io, urlshortx.com, shortzon.com

Above are the supported url Shorteners. Except these only some url Shorteners are supported.

Note: You can limit maximum concurrent downloads by changing the value of MAX_CONCURRENT_DOWNLOADS in aria.sh. By default, it's set to 7.

Add more buttons (Optional Field)

Three buttons are already added of Drive Link, Index Link, and View Link, you can add extra buttons, these are optional, if you don't know what are below entries, simply leave them, don't fill anything in them.

  • BUTTON_FOUR_NAME:
  • BUTTON_FOUR_URL:
  • BUTTON_FIVE_NAME:
  • BUTTON_FIVE_URL:
  • BUTTON_SIX_NAME:
  • BUTTON_SIX_URL:

Getting Google OAuth API credential file

  • Visit the Google Cloud Console
  • Go to the OAuth Consent tab, fill it, and save.
  • Go to the Credentials tab and click Create Credentials -> OAuth Client ID
  • Choose Desktop and Create.
  • Use the download button to download your credentials.
  • clone this repo https://github.com/ayushteke/slam_aria_mirror_bot_HEROKU
  • Move that file to the root of mirrorbot, and rename it to credentials.json
  • install the requirements-cli.txt file by using

pip3 install -r requirements-cli.txt

  • Visit Google API page
  • Search for Drive and enable it if it is disabled
  • Finally, run the script to generate token.pickle file for Google Drive:
python3 generate_drive_token.py

Deploying on vps

  • Start docker daemon (skip if already running):
sudo dockerd
  • Build Docker image:
sudo docker build . -t mirrorbot
  • Run the image:
sudo docker run mirrorbot

bot commands will be set automatically

some of the commands are changed because the group members use them without any reason

Using service accounts for uploading to avoid user rate limit

For Service Account to work, you must set USE_SERVICE_ACCOUNTS="True" in config file or environment variables Many thanks to AutoRClone for the scripts NOTE: Using service accounts is only recommended while uploading to a team drive.

Generate service accounts. What is service account

first enable IAM API from cloud console by Visiting Google API page

Let us create only the service accounts that we need. Warning: abuse of this feature is not the aim of this project and we do NOT recommend that you make a lot of projects, just one project and 100 sa allow you plenty of use, its also possible that over abuse might get your projects banned by google.

Note: 1 service account can copy around 750gb a day, 1 project can make 100 service accounts so that's 75tb a day, for most users this should easily suffice.

python3 gen_sa_accounts.py --quick-setup 1 --new-only

A folder named accounts will be created which will contain keys for the service accounts

NOTE: If you have created SAs in past from this script, you can also just re download the keys by running:

python3 gen_sa_accounts.py --download-keys project_id

Add all the service accounts to the Team Drive

  • Run:
python3 add_to_team_drive.py -d SharedTeamDriveSrcID

Youtube-dl authentication using .netrc file

For using your premium accounts in youtube-dl, edit the .netrc file according to following format:

machine host login username password my_youtube_password

where host is the name of extractor (eg. youtube, twitch). Multiple accounts of different hosts can be added each separated by a new line

Credits

Thanks to: