Switch OC Suite
Overclocking suite for Horizon OS (HOS) running on Atmosphere CFW.
DISCLAIMER: USE AT YOUR OWN RISK!
-
Overclocking in general will shorten the lifespan of some hardware components. YOU ARE RESPONSIBLE for any problem or potential damage if unsafe frequencies are ENABLED in sys-clk-OC. Issues like asking for bypassing limit will BE IGNORED OR CLOSED WITHOUT REPLY.
-
Due to HorizonOS design, instabilities from unsafe RAM clocks may cause filesystem corruption. Always make backup before enabling DRAM OC.
Features
-
Erista variant (HAC-001)
-
CPU Overclock (Safe: 1785 MHz)
- Unsafe
- Due to the limit of board power draw or power IC
- Unlockable frequencies up to 2091 MHz
- See README for sys-clk-OC
- Unsafe
-
DRAM Overclock (Safe: 1862.4 MHz)
-
-
Mariko variant (HAC-001-01, HDH-001, HEG-001)
-
CPU / GPU Overclock (Safe: 1963 / 998 MHz)
- Unsafe
- Due to the limit of board power draw or power IC
- Unlockable frequencies up to 2397 / 1305 MHz or 2295 / 1267 MHz
- See README for sys-clk-OC
- Unsafe
-
DRAM Overclock (Safe: 1996.8 MHz)
-
-
Modded sys-clk and ReverseNX-RT
-
Auto CPU Boost
- For faster game loading
- Enable CPU Boost (1785 MHz) when CPU Core#3 (System Core) is stressed (mainly I/O operations).
- Effective only when charger is connected.
-
CPU & GPU frequency governor (Experimental)
- Adjust frequency based on load. Might decrease power draw but can introduce stutters. Can be turned off for specific titles.
-
Set charging current (100 mA - 2000 mA) and charging limit (20% - 100%)
- Long-term use of charge limit may render the battery gauge inaccurate. Performing full cycles could help recalibration, or try battery_desync_fix_nx.
-
Global Profile
- Designated a dummy title id
0xA111111111111111
. - Priority: "Temp overrides" > "Application profile" > "Global profile" > "System default".
- Designated a dummy title id
-
Sync ReverseNX Mode
- No need to change clocks manually after toggling modes in ReverseNX (-RT and -Tool)
-
Installation
-
Download latest release.
-
Copy all files in
SdOut
to the root of SD card. -
Grab
x.x.x_loader.kip
for your Atmosphere version, rename it toloader.kip
and place it in/atmosphere/kips/
. -
Customization via online loader configurator:
Defaults Mariko Erista CPU OC 2397 MHz Max 2091 MHz Max CPU Boost 1785 MHz N/A CPU Volt 1235 mV Max 1235 mV Max GPU OC 1305 MHz Max N/A RAM OC 1996 MHz Max 1862 MHz Max RAM Volt Disabled Disabled RAM Timing Auto-Adjusted N/A -
Hekate-ipl bootloader Only
- Add
kip1=atmosphere/kips/loader.kip
to boot entry section inbootloader/hekate_ipl.ini
.
- Add
Build
Grab necessary patches from the repo, then compile sys-clk, ReverseNX-RT and Atmosphere loader with devkitpro.
Before compiling Atmosphere loader, run patch.py
in Atmosphere/stratosphere/loader/source/
to insert oc module into loader sysmodule.
When compilation is done, uncompress the kip to make it work with configurator: hactool -t kip1 Atmosphere/stratosphere/loader/out/nintendo_nx_arm64_armv8a/release/loader.kip --uncompress=./loader.kip
Acknowledgement
- CTCaer for Hekate-ipl bootloader, RE and hardware research
- devkitPro for All-In-One homebrew toolchains
- masagrator for ReverseNX-RT and info on BatteryChargeInfoFields in psm module
- Nvidia for Tegra X1 Technical Reference Manual
- RetroNX team for sys-clk
- SciresM and Reswitched Team for the state-of-the-art Atmosphere CFW of Switch
- Switchbrew wiki for Switch in-depth info
- Switchroot for their modified L4T kernel and device tree
- ZatchyCatGames for RE and original OC loader patches for Atmosphere