/padavan-4.4-MeIsReallyBa

Primary LanguageC

padavan-4.4

This project is based on original rt-n56u with latest mtk 4.4.198 kernel, which is fetch from D-LINK GPL code.

  • Features

    • Based on 4.4.198 Linux kernel
    • Support MT7621 based devices
    • Support MT7615D/MT7615N/MT7915D wireless chips
    • Support raeth and mt7621 hwnat with legency driver
    • Support qca shortcut-fe
    • Support IPv6 NAT based on netfilter
    • Support WireGuard integrated in kernel
    • Support fullcone NAT (by Chion82)
    • Support LED&GPIO control via sysfs

  • Supported devices

    • CR660x
    • JCG-Q20
    • JCG-AC860M
    • JCG-836PRO
    • JCG-Y2
    • DIR-878
    • DIR-882
    • K2P
    • K2P-USB
    • NETGEAR-BZV
    • MR2600
    • MI-4
    • MI-R3G
    • MI-R3P
    • R2100
    • XY-C1

  • Compilation step

    • Install dependencies 
      # Debian/Ubuntu
sudo apt install unzip libtool-bin curl cmake gperf gawk flex bison nano xxd \
    fakeroot kmod cpio git python3-docutils gettext automake autopoint \
    texinfo build-essential help2man pkg-config zlib1g-dev libgmp3-dev \
    libmpc-dev libmpfr-dev libncurses5-dev libltdl-dev wget libc-dev-bin

# Archlinux/Manjaro
sudo pacman -Syu --needed git base-devel cmake gperf ncurses libmpc \
        gmp python-docutils vim rpcsvc-proto fakeroot cpio help2man

# Alpine
sudo apk add make gcc g++ cpio curl wget nano xxd kmod \
    pkgconfig rpcgen fakeroot ncurses bash patch \
    bsd-compat-headers python2 python3 zlib-dev \
    automake gettext gettext-dev autoconf bison \
    flex coreutils cmake git libtool gawk sudo
    • Clone source code 
      git clone https://github.com/meisreallyba/padavan-4.4.git
    • Prepare toolchain 
      cd padavan-4.4/toolchain-mipsel

# (Recommend) Download prebuilt toolchain for x86_64 or aarch64 host
./dl_toolchain.sh

# or build toolchain with crosstool-ng
# ./build_toolchain
    • Modify template file and start compiling 
      cd padavan-4.4/trunk

# (Optional) Modify template file
# nano configs/templates/K2P.config

# Start compiling
fakeroot ./build_firmware_modify K2P

# To build firmware for other devices, clean the tree after previous build
./clear_tree

  • Manuals

    • Controlling GPIO and LEDs via sysfs
    • How to use NAND RWFS partition
    • How to use IPv6 NAT and fullcone NAT
    • How to add new device support with device tree