Test Failure on a Nvidia 2070 with 32 bit build on Windows 10 with 531.79 driver

[johnzupin]

Seeing a test failure on the main branch with an Nvidia 2070 card with a 32 bit build using driver version 531.79. Not seeing this on a 64 bit build.

[==========] Running 23 tests from 4 test suites.
[----------] Global test environment set-up.
[----------] 13 tests from Sync2Test
[ RUN      ] Sync2Test.OwnershipTranfersImage
[       OK ] Sync2Test.OwnershipTranfersImage (1902 ms)
[ RUN      ] Sync2Test.OwnershipTranfersBuffer
[       OK ] Sync2Test.OwnershipTranfersBuffer (499 ms)
[ RUN      ] Sync2Test.SecondaryCommandBufferBarrier
[       OK ] Sync2Test.SecondaryCommandBufferBarrier (497 ms)
[ RUN      ] Sync2Test.SecondaryCommandBufferImageLayoutTransitions
[       OK ] Sync2Test.SecondaryCommandBufferImageLayoutTransitions (491 ms)
[ RUN      ] Sync2Test.QueueSubmitSemaphoresAndLayoutTracking
[       OK ] Sync2Test.QueueSubmitSemaphoresAndLayoutTracking (483 ms)
[ RUN      ] Sync2Test.CommandBufferSimultaneousUseSync
[       OK ] Sync2Test.CommandBufferSimultaneousUseSync (483 ms)
[ RUN      ] Sync2Test.BarrierLayoutToImageUsage
[       OK ] Sync2Test.BarrierLayoutToImageUsage (489 ms)
[ RUN      ] Sync2Test.WaitEventThenSet
[       OK ] Sync2Test.WaitEventThenSet (495 ms)
[ RUN      ] Sync2Test.TwoQueueSubmitsSeparateQueuesWithSemaphoreAndOneFenceTwoWFF
[       OK ] Sync2Test.TwoQueueSubmitsSeparateQueuesWithSemaphoreAndOneFenceTwoWFF (477 ms)
[ RUN      ] Sync2Test.TwoSubmitInfosWithSemaphoreOneQueueSubmitsOneFence
[       OK ] Sync2Test.TwoSubmitInfosWithSemaphoreOneQueueSubmitsOneFence (503 ms)
[ RUN      ] Sync2Test.ClearDepthStencilWithValidRange
[       OK ] Sync2Test.ClearDepthStencilWithValidRange (507 ms)
[ RUN      ] Sync2Test.QueueSubmitTimelineSemaphore
[       OK ] Sync2Test.QueueSubmitTimelineSemaphore (522 ms)
[ RUN      ] Sync2Test.SwapchainImage
[       OK ] Sync2Test.SwapchainImage (836 ms)
[----------] 13 tests from Sync2Test (8191 ms total)

[----------] 1 test from Sync2CompatTest
[ RUN      ] Sync2CompatTest.Vulkan10
[       OK ] Sync2CompatTest.Vulkan10 (50 ms)
[----------] 1 test from Sync2CompatTest (50 ms total)

[----------] 2 tests from DecompressionTest
[ RUN      ] DecompressionTest.DecompressMemory
C:\j\mel\Vulkan-ExtensionLayer\tests\decompression_tests.cpp(44): Skipped
VK_KHR_portability_subset enabled, skipping.


[  SKIPPED ] DecompressionTest.DecompressMemory (68 ms)
[ RUN      ] DecompressionTest.DecompressMemoryIndirect
C:\j\mel\Vulkan-ExtensionLayer\tests\decompression_tests.cpp(125): Skipped
VK_KHR_portability_subset enabled, skipping.


[  SKIPPED ] DecompressionTest.DecompressMemoryIndirect (21 ms)
[----------] 2 tests from DecompressionTest (89 ms total)

[----------] 7 tests from ShaderObjectTest
[ RUN      ] ShaderObjectTest.VertFragShader
[       OK ] ShaderObjectTest.VertFragShader (834 ms)
[ RUN      ] ShaderObjectTest.LinkedShadersDraw
[       OK ] ShaderObjectTest.LinkedShadersDraw (426 ms)
[ RUN      ] ShaderObjectTest.AllShadersDraw
[       OK ] ShaderObjectTest.AllShadersDraw (516 ms)
[ RUN      ] ShaderObjectTest.AllShadersDrawBinary
[       OK ] ShaderObjectTest.AllShadersDrawBinary (478 ms)
[ RUN      ] ShaderObjectTest.ComputeShader
[       OK ] ShaderObjectTest.ComputeShader (561 ms)
[ RUN      ] ShaderObjectTest.TaskMeshShadersDraw
[       OK ] ShaderObjectTest.TaskMeshShadersDraw (531 ms)
[ RUN      ] ShaderObjectTest.FailCreateShaders
C:\j\mel\Vulkan-ExtensionLayer\tests\shader_object_tests.cpp(1242): error: Expected equality of these values:
  shaders[i]
    Which is: 58524323886923776
  0ULL
    Which is: 0

[  FAILED  ] ShaderObjectTest.FailCreateShaders (516 ms)
[----------] 7 tests from ShaderObjectTest (3866 ms total)

[----------] Global test environment tear-down
[==========] 23 tests from 4 test suites ran. (12295 ms total)
[  PASSED  ] 20 tests.
[  SKIPPED ] 2 tests, listed below:
[  SKIPPED ] DecompressionTest.DecompressMemory
[  SKIPPED ] DecompressionTest.DecompressMemoryIndirect
[  FAILED  ] 1 test, listed below:
[  FAILED  ] ShaderObjectTest.FailCreateShaders

 1 FAILED TEST
ERROR: -------------------------------------------------------------
ERROR: FAIL during test after 12.44 seconds (12.44 seconds) with execute(C:\j\mel\Vulkan-ExtensionLayer\build32\tests\Release\vk_extension_layer_tests.exe --gtest_catch_exceptions=0) failed after 12.42 seconds (12.42 seconds) with returncode=1 (0x1)
INFO: Test run complete after 3.80 minutes (228.29 seconds)

Link to the test: http://erusea:8080/view/Manual/job/manual-Vulkan-ExtensionLayer/7/console

Can be replicated using tcwinnvi4