CLASSIC LADDER PROJECT Copyright (C) 2001-2023 Marc Le Douarain marc . le - douarain /AT\ laposte \DOT/ net http://www.sourceforge.net/projects/classicladder http://sites.google.com/site/classicladder February 2001 Version 0.9.113+ (xx March 2023) -------------------------------- A project to have a free ladder language in C. Generally, you find this type of language on PLC to make the programs. It allows you to realize little programs or bigger in an electric way. This project is released under the terms of the LGPL license v3, and LGPL v2 for EMC project usage. GENESIS... ---------- I decided to program a ladder language only for test purposes at the start, in february 2001. It was planned, that I would have to participate to a new controller at work. And I was thinking that to have a ladder language in it could be a nice option to considerate. And so I started to code the first lines for calculating a rung with minimal elements and displaying dynamically it under Gtk, to see if my first idea to realise all this works. And as quickly I've found that it advanced quite well, I've continued with more complex elements : timer, multiples rungs, etc... Voilà, here is this work... And for the controller at job? Well, in fact, it's already a lot of work to do the basic features of the traffic lights and I don't think we will add a ladder language to it one day... ;-) FEATURES... ----------- Classic Ladder is coded 100% in C. It can be used for educational purposes or anything you want... The graphical user interface uses GTK. In the actual version, the following elements are implemented : * Booleans elements * Rising / falling edges * New IEC Timers (since v0.7.120) * Timers (for compatibility, no more really usefull) * Monostables (for compatibility, no more really usefull) * Counters (since v0.7.80) * Compare of arithmetic expressions (since v0.4) * Booleans outputs * Set / Reset coils * Jumps * Calls to sub-routines (since v0.5.5) * Operate of arithmetic expressions (since v0.4) Each rung can have a label (used for jumps) and a comment (displayed at the top). They can be edited for the current rung, in the two edits at the top of the window. There is a full editor for rungs since v0.3 You can: - add a rung after the current rung. - insert a rung before the current rung. - modify the current rung. - delete the current rung. When editing, use the pointer of the toolbar if you want only to modify properties, else select the element you want to place in the rung. A popup menu (since v0.9.7) with the right click is available to edit without having to use the toolbar window. Many rungs can be displayed at the same time, and you can use a vertical scollbar. The current rung is the rung with the blue bars on each side. When window resized, it is automatically selected by choosing the toppest rung which is completely visible. You can manually select one between the others below (if you can see them with a large vertical window). Since v0.5.5, the program can be split in many sections. There is a window 'Sections manager' where you can see all the sections defined, add/delete a section, and modify the order executions of the main sections. There is two types of sections available : main or sub-routine (SR). The main sections are refreshed directly in the following order : top sections first, bottom sections last. The sub-routines sections are refreshed when called from a rung. Each sub-routine (SR) has a unique number used in the (C)all coils. Load & Run "example_many_sections" for a demo example. Since v0.6.0, a new language has been integrated : a "sequential" also called "grafcet". In the section manager, select the language wanted when you add a section. Load & Run "example_sequential" for a demo example. The editor for sequential is arrived in v0.7.0 When using the link button ('\.) in the toolbar, when clicking on transition, the top or bottom part of it is very important !!! Since v0.8.4, part copy of a rung possible in two steps: selection of a part in the current rung, then copy part selected in memory somewhere in the current rung (another one possible). Since v0.8.5, events logs available (with full events configuration of the assiocated variables the user want to log). Each events can be configured as defaults. Since v0.9.0, monitor target possible in IP (UDP) or Serial with rungs activity, sequential activity, read free/bool vars. See new menu PLC/Connect. You have to open the same file project in local than the project running on the target (you have to select the correct file, no control is done, if none you will debug bad elements and will do not understand anything!!!). Since v0.9.4, some projects infos (name, author) can be entered (in a tab of the free vars window). Since v0.9.5, project can be send or received to/from another classicladder (via monitor protocol). Usefull for an embedded target! Since v0.9.11, a PSTN/GSM modem can be connected to be used for monitor protocol ! + can run just for one cycle. ClassicLadder can run in real-time with RTLinux, RTAI or Xenomai (optional). Only Xenomai used in latest versions. See below. REQUIREMENTS... --------------- For using Classic Ladder as it is, you need : * Linux * Gtk version 2 or 3 A precompiled Linux binary executable is included in the archive that you can directly launch. If required, you can recompile yourself the project, see below... COMPILATION... -------------- To recompile the sources, in a console : type "cd src;make clean;make;cd .." type "./classicladder" to launch this project. or "./classicladder projects_examples/xxxxxxxxxx.clprj" to start with using project datas "xxxxxxxxxx.clprj". First you need to have the gcc compiler and make installed, see package "build-essential" if needed ! You must have the package "zlib1g-dev" installed to be able to compile. To compile a GTK+2 version, ensure you've the package "libgtk2.0-dev" installed before. To compile a GTK+3 version, ensure you've the package "libgtk-3-dev" installed before. Choice between GTK2 and GTK3 is done by modifying the Makefile: comment lines after "#===For GTK2 Version===" and uncomment lines after "#===For GTK3 Version===", or inversely. To compile on PowerPC processor (in fact not x86 processors generally), in the Makefile, add the caracter '#' to comment the line MAKE_IO_ACCESS. MODBUS SERVER INCLUDED (SLAVE TO CONNECT TO A SCADA)... ------------------------------------------------------- ClassicLadder has a Modbus/TCP server integrated. Default port is 9502, standard 502 requires that the application has been launched with root privileges. List of functions code supported are: 1, 2, 3, 4, 5, 6, 15 and 16. Modbus bits and words correspondence table is actually not parametrable and correspond directly to the %B and %W variables. Infos on modbus protocol are available here: http://www.modbus.org http://www.sourceforge.net/projects/jamod http://www.modicon.com/techpubs/toc7.html LOGS / REMOTE ALARMS... ----------------------- First define logs corresponding to vars to log: first var %Bxxxx / nbr vars (minimum = 1!!!!) for each log event. When an event is created, in case of many vars, parameter value = offset from first var %Bxxxx. Remote alarms (8 slots) can be defined for each log event. Each remote alarm slot corresponds to a SMS or email destination. For email, external command "mailsend" required in /usr/bin (https://code.google.com/p/mailsend/) For SMS send, a Wavecom chip modem has been used an successfully tested. Do not forget to define center SMS server (depending of GSM phone operator used). EMBEDDED VERSION... ------------------- If you want to make an embedded version of classicladder without the GTK interface: comment the GTK_INTERFACE line in the Makefile + see CROSS & OWN_CFLAGS & OWN_LIBSFLAGS to adjust to the correct processor architecture of the target if required. Type 'CTRL-C' if you want to exit the Linux application, or send kill signal (if daemonized, only kill signal can be used). Since v0.6.4 it is possible to define maximum sizes for the differents arrays to save a lot of memory if you're short on it on your target. You must give a config file at startup... Well, no since v0.7.110, the sizes defined are saved in the project file, and are used for the first project file loaded (in the commande line). Since v0.9.2, the project file loaded at startup can also be save in the preferences file saved in your home directory (from the gtk config window), or in priority from "classicladder_prefs" near the executable or "/etc/classicladder_prefs" (if already available there). REAL-TIME SUPPORT WITH XENOMAI 2 OR 3 (IN USER-SPACE)... -------------------------------------------------------- Added in v0.7.92, september 2006. Xenomai version 3 requires ClassicLadder v0.9.030 minimum See http://www.xenomai.org xeno-config command must be in your path. Uncomment the corresponding line in the Makefile. Then type "cd src;make clean;make;cd.." to compile the project. With a "./classicladder" you will launch the real-time version !!! Xenomai rules! And is advised instead of a RTLinux/RTAI kernel module version. To have real-time in user-land is really easier than with the module, the future is here, and now !!! REAL-TIME SUPPORT WITH RTLINUX... --------------------------------- (no more maintained...) To have RTLinux v3 installed before is required (see http://www.rtlinux.org) Be sure that the hello example works after RTLinux installation (perhaps you will have to type dmesg to verify if the hello texts was correctly displayed). With this version, the refresh of the rungs is done in real-time. Verify the symbolic link (or real directory depending how you've installed) "/usr/rtlinux" pointing on the rtlinux directory, exists. Here, I've done the following : cd /usr ln -sf /usr/src/your-rtlinux+linux-dir/rtlinux-3.1 rtlinux In a console, type the following to recompile and run : make clean;make rtl_support su ./run_rt run_rt script accepts two optional arguments : first for the name of project to load, second for a config file with sizes to alloc at startup -config file is now obsolete, new test needed- I've tested here the real-time version with RTLinux v3.2pre3 and Linux kernel v2.4.20 compiled with gcc v3.2 REAL-TIME SUPPORT WITH RTAI... ------------------------------ (no more maintained...) Verify the symbolic link (or real directory depending how you've installed) "/usr/src/rtai" pointing on the rtai directory, exists. Here, I've done the following : ln -sf /usr/src/your-rtai /usr/src/rtai In a console, type the following to recompile and run : make clean make rtai_support su ./run_rt run_rt script accepts two optional arguments : first for the name of project to load, second for a config file with sizes to alloc at startup. Tested with 2.4.22 kernel patched with ADEOS and compiled with gcc-3.2 running on a Debian (Sid) system. HARDWARE (LOCAL INPUTS/OUTPUTS)... ---------------------------------- Since v0.6.5, hardware interface has been completely rewritten (before limited to the parallels ports only). Firstly, if you use ClassicLadder to drive real things, it can crash, and I will not be responsible if it produces any damages ! You can configure any logical inputs/ouputs with any addresses ports (x86 architecture) or a Comedi device (see www.comedi.org). Comedi is a collection of drivers for many data acquisition boards. You configure the mapping in the config window : tabs "Inputs" and "Outputs". In each line, you set the first logical %I/%Q that will be mapped with the hardware you will set. For a direct port access, you then give the address in hexa to use. For a comedi device, you then give the sub-device associated. After, you set the first channel offset and the number of channels to map. For example : %I5 mapped with 4 channels means that %I5, %I6, %I7 and %I8 are affected to an hardware channel. So be carrefull not to overlap. For some GPIOs on which direction must be configured, you can use "Config" to send a config data value to a config port (v0.9.4). Comedi or direct access can works with Linux version or RTLinux version. For direct access under Linux, the application must be launched as root, as it used the ioperm( ) functions. Per default, Comedi support is not compiled. Take a look at the Makefile and uncomment the COMEDI_SUPPORT line. Comedi is included since RLinux3.2pre2, but you still must download the comedilib archive (comedi_config) !!! Here I've made a test with the builtin parallel port. You will find the 2 projects : 'parallel_port_direct' and 'parallel_port_comedi'. Here the pins and I/O map for the direct project: * -- Parallel port 1 -- Inputs DB25Pin ClassicLadder S3 15 I3 S4 13 I4 S5 12 I5 S6 10 I6 S7 11 I7 Outputs DB25Pin Classicladder D0 2 Q0 D1 3 Q1 D2 4 Q2 D3 5 Q3 D4 6 Q4 D5 7 Q5 D6 8 Q6 D7 9 Q7 I've tested with 3 DELs and 4 switches on the parallel port 1. The switches on inputs are linked to ground (pin 24) : _n_ (Sx) o-- --O (24) The DELs are linked in serial with a resistance of 330 ohms to ground (pin 25) : , (Dx) o--[ 330 ]--|>|--o (25) HARDWARE (DISTRIBUTED INPUTS/OUTPUTS)... ---------------------------------------- ClassicLadder can use distributed inputs/outputs on modules using the modbus protocol ("master": pooling slaves). The slaves and theirs I/O can be configured in the config window. 2 exclusive modes are available : ethernet using Modbus/TCP and serial using Modbus/RTU. For the serial one, the serial port and the speed must be correctly fixed, and are used only at startup of classicladder (started in argument with that projectfile). No parity is used. If no port name for serial is set, IP mode will be used... The slave address is the slave address (Modbus/RTU) or the IP address. The IP address can be followed per the port number to use (xx.xx.xx.xx:pppp) else the port 502 will be used per default. Per default, the modbus address element 1 is the first one (0 in the frame). Offset that can be parametred. 2 products have been used for tests: a Modbus/TCP one (Adam-6051, http://www.advantech.com) and a serial Modbus/RTU one (http://www.ipac.ws) See examples: adam-6051 and modbus_rtu_serial. Web links: http://www.modbus.org and this interesting one: http://www.iatips.com/modbus.html LINKS... -------- You should take a look at the MAT project. Classicladder has been integrated to this project to have a relay ladder logic to program this PLC. http://mat.sourceforge.net/ Another project using ClassicLadder: EMC2, used to control machine tools. http://www.linuxcnc.org/ Comedi project at www.comedi.org KNOWN LIMITATIONS / BUGS... ---------------------------- * Modbus master for distributed I/O, should be use with caution... Generally, the logic used on a PLC is: get inputs, apply logic (rungs/grafcet), and then set ouputs, but it is absolutely not the case with distributed I/O. Perhaps it could cause some troubles...? Moreover, not running in a real-time thread ! * RTLinux/RTAI will no more work since v0.9.015 (objects memory allocation of project datas after project size configuration loaded, done each time and not only at startup for first project loaded) * Registers blocks are a really new function (since v0.9.022), and has not been deeply tested ! FUTURE / TO DO LIST... ---------------------- see file TODO.txt
KimK/classicladder
Free ladder & sequential (grafcet) languages as used on many PLC for programming automation process.
C