This component provides a sensor component for ESPHome for the Grove multichannel gas sensor V2. It has the ability to detect a variety of gases: Carbon monoxide (CO), Nitrogen dioxide (NO2), Ethyl alcohol(C2H5CH), Volatile Organic Compounds (VOC). According to the specifications it is rather a qualitive than a quantitive sensor. But this is enough for fun projects like building an artificial nose. If you are interested in qualitative measurements, you may want to enable the raw_values option, which will publish raw sensor readings instead of converted ppm values.
In order to connect the Grove multi gas sensor to an ESP32 I recommend this cable. You connect the black female jumper to ground, the red one to 3.3V, the yellow one to pin 25, and the white one to pin 26. Then you plug the gove connector into the sensor.
To configure the sensor for ESPHome you do not need to download or copy anything manually, you can just refer to this external component from the yaml file like this:
external_components:
- source: github://wifwucite/esphome-grove-multi-gas-v2
i2c:
sda: GPIO26 # white grove cable‚
scl: GPIO25 # yellow grove cable
sensor:
- platform: grove_multigas_v2
# raw_values: true # raw adc values instead of ppm values
NO2:
name: "NO2"
C2H5OH:
name: "ethanol"
VOC:
name: "VOC"
CO:
name: "CO"
update_interval: 25ms # default is 500msThis is it, happy smelling!