Koenkk/zigbee-herdsman

Issues

• Issue with network scan

  #1220 opened a month ago by asgothian
  8

• State of ZiGate support

  #1037 opened 7 months ago by Koenkk
  19

• Changes to payload when sending zclData to a device breaks iobroker.zigbee function

  #998 opened a month ago by asgothian
  1

• deconz driver/adapter (for ConBee/RaspBee Zigbee Coordinator) does not support joining/pairing via install code (or qr code)

  #1184 opened 2 months ago by Hedda
  5

• [Proposal] Removal of "forever" Permit Join

  #940 opened a month ago by Nerivec
  13

• Unhandled EZSP frame incomingManyToOneRouteRequestHandler and OTA update in progress causes EZSP to stop

  #834 opened 2 months ago by irata-coder
  3

• ZiGate reverse IEEE address on adding devices (probaby in other messages)

  #1169 opened 3 months ago by devbis
  0

• PM2.5 invalid cluster definition

  #828 opened 4 months ago by devbis
  8

• zh:ezsp:ezsp: Frame idConflictHandler parsing error: TypeError: Cannot set property id of #<EZSPFrameData> which has only a getter at new EZSPFrameData

  #1162 opened 3 months ago by saveriol
  2

• [EZSP] ZGP / greenPower messages are not relayed by HUE routers

  #823 opened 3 months ago by rsegers
  22

• The readme docu link leads to 502

  #1143 opened 3 months ago by Matthias-Hermsdorf
  2

• Make waitress timeout configurable

  #857 opened 3 months ago by corporategoth
  1

• Waitress timer is being set at the wrong time

  #856 opened 3 months ago by corporategoth
  17

• Want better endpoint.writeStructured()

  #907 opened 9 months ago by sjorge
  3

• Custom cluster support

  #1137 opened 4 months ago by matteovisotto
  2

• Issue with serialport v12 and node > v20.2.0

  #870 opened 4 months ago by Nerivec
  1

• zStack Parsing Error & Manufacturer Custom Command reported multiple times

  #1101 opened 4 months ago by schrluka
  1

• Silabs Zigbee EmberZNet 8.0.0.0 (and Silicon Labs Gecko SDK 5.0.0.0) announced and to be released in Q3 2024

  #1093 opened 4 months ago by Hedda
  1

• get members() in zigbee-herdsman/src/controller/model/group.ts

  #801 opened 5 months ago by klebom
  1

• [Task] ZCL definition update

  #902 opened 9 months ago by Nerivec
  4

• Adapters hardware flow control issues

  #943 opened 8 months ago by Nerivec
  30

• [Cluster Type] Align cluster definition for 'name' attribute

  #1059 opened 6 months ago by LaurentChardin
  1

• [REQUERST] Support for Silicon Labs multiprotocol stack when using Silabs Multi-PAN RPC (Radio Co-Processor) firmware

  #682 opened 6 months ago by Hedda
  11

• Cannot read statuses and control devices. Adapter: ezsp

  #803 opened 6 months ago by JakubGoliasz
  2

• How to deal with same manufcaturer/cluster combo but different attributes?

  #789 opened 6 months ago by sjorge
  4

• Incorrect Cluster Name On Device Response

  #827 opened 6 months ago by danieledwardgeorgehitchcock
  11

• how to add a new cluster to zigbee2mqtt locally

  #807 opened 6 months ago by Anzal3c3
  2

• Load additional manufacturer-specific clusters from device converter

  #933 opened 6 months ago by rgiordano30
  4

• Z2M 1.35.2 stops with "Adapter disconnected, stopping" after few minutes of uptime (Sonoff-E / EZSP v12 / FW 7.3.2.0 build 212)

  #910 opened 6 months ago by romarysonrier
  3

• Ember driver : Error while parsing received frame, status=NO_RX_SPACE.

  #1000 opened 7 months ago by vauhallan
  1

• Ember driver: SET "APS_UNICAST_MESSAGE_COUNT" TO "32" with status=ERROR_OUT_OF_MEMORY.

  #1002 opened 7 months ago by zalatnaicsongor
  1

• Sudden failure to startup - timeout after SRSP - ZDO - startupFromApp

  #765 opened a year ago by thargy
  20

• Move special readResponse out of zhc/src/index.ts (fixes legrand pairing issues)

  #979 opened 8 months ago by sjorge
  8

• proposal: deprecation of legacy clicks

  #972 opened 8 months ago by mrskycriper
  1

• Ikea Motion Sensor E1525/E1745 not updating properly

  #954 opened 8 months ago by Nerivec
  6

• zigbee2mqtt<->EZSP incompatible with latest Gecko SDK v4.4.0.0 (EmberZNet 7.4.0.0) firmware build

  #854 opened 9 months ago by xconverge
  23

• Get strange error in latest z2m with the latest zigbee-herdsman

  #893 opened 9 months ago by wastez
  6

• Lower bound of "turnsOffAtBrightness1" ignored by "brightness_move" & "brightness_step" commands

  #865 opened 10 months ago by burmistrzak
  1

• endpoind.read() should also use attribute specific manufacturerCode when available

  #847 opened 10 months ago by sjorge
  6

• endpoint.configureReporting does not take into account attribute specific manufacturerCode ?

  #843 opened a year ago by sjorge
  1

• EZSP does not implement concurrency correctly

  #770 opened a year ago by corporategoth
  11

• Does it support WTSK + radio board in NCP mode instead of USB-doggles?

  #750 opened a year ago by GanesanGuru123
  2

• False LQI using Multipan Addon

  #738 opened a year ago by Drealine
  1

• Improve endpoint->configureReporting to handle manufacturer specific clusters/attributes

  #717 opened a year ago by sjorge
  4

• Herdsman crash - bringing down network until I reset the Zigbee network

  #740 opened a year ago by BradleyFord
  1

• syntax error in table.ts

  #729 opened a year ago by bruno4712
  1

• after Update from 1.8.06 to 1.8.12 Device with no States

  #733 opened a year ago by Toysman
  1

• Is it possible to create multiple controllers with this lib?

  #690 opened 2 years ago by willieee802
  9

• deconz ConBee/RaspBee adapters - probe the protocol version

  #692 opened 2 years ago by famzah
  3

• Unable To Send Commands To Clusters Which Share Same Cluster ID

  #686 opened 2 years ago by danieledwardgeorgehitchcock
  6