/dbus-growatt-shinex

Growatt_Victron_connector

Primary LanguagePythonMIT LicenseMIT

dbus-growatt-shinex

Integrate Growatt-ShineWifi into Victron Energies Venus OS

Purpose

With the scripts in this repo it should be easy possible to install, uninstall, restart a service that connects the Growatt Inverter to the VenusOS and GX devices from Victron. Idea is inspired on @fabian-lauer & @vikt0rm projects linked below.

Inspiration

This is my first project with the Victron Venus OS on GitHub, so I took some ideas and approaches from the following projects - many thanks for sharing the knowledge:

------------------------------------ Update below needed ----------------------------------------------------

How it works

My setup

  • Growatt ShineWifi-X
    • Measuring AC output of Growatt MIC 600TL-X on phase L1
    • Connected to Wifi netowrk "A" with a known IP
  • Venus OS on Raspberry PI 3B - Firmware v2.89
    • No other devices from Victron connected
    • Connected to Wifi netowrk "A"

Details / Process

As mentioned above the script is inspired by @fabian-lauer dbus-shelly-3em-smartmeter implementation. So what is the script doing:

  • Running as a service
  • connecting to DBus of the Venus OS com.victronenergy.pvinverter.http_{DeviceInstanceID_from_config}
  • After successful DBus connection the Growatt Inverter WifiDongle is accessed via REST-API - simply the /status is called and a JSON is returned with all details
  • Paths are added to the DBus with default value 0 - including some settings like name, etc
  • After that a "loop" is started which pulls data every 750ms from the REST-API and updates the values in the DBus

Thats it 😄

Pictures

Tile Overview Device List - Overview Growatt - Values Growatt - Device Details

Install & Configuration

Get the code

Just grap a copy of the main branche and copy them to a folder under /data/ e.g. /data/dbus-growatt-shinex. After that call the install.sh script.

The following script should do everything for you:

wget https://github.com/Kotty666/dbus-growatt-shinex/archive/refs/heads/main.zip
unzip main.zip "dbus-growatt-shinex-main/*" -d /data
mv /data/dbus-growatt-shinex-main /data/dbus-growatt-shinex
chmod a+x /data/dbus-growatt-shinex/install.sh
/data/dbus-growatt-shinex/install.sh
rm main.zip

⚠️ Check configuration after that - because service is already installed an running and with wrong connection data (host, username, pwd) you will spam the log-file

Change config.ini

Within the project there is a file /data/dbus-growatt-shinex/config.ini - just change the values - most important is the deviceinstance, custom name and phase under "DEFAULT" and host, username and password in section "ONPREMISE". More details below:

Section Config vlaue Explanation
DEFAULT AccessType Fixed value 'OnPremise'
DEFAULT SignOfLifeLog Time in minutes how often a status is added to the log-file current.log with log-level INFO
DEFAULT Deviceinstance Unique ID identifying the shelly 1pm in Venus OS
DEFAULT CustomName Name shown in Remote Console (e.g. name of pv inverter)
DEFAULT Phase Valid values L1, L2 or L3: represents the phase where pv inverter is feeding in
ONPREMISE Host IP or hostname of on-premise Shelly 3EM web-interface
ONPREMISE Username Username for htaccess login - leave blank if no username/password required
ONPREMISE Password Password for htaccess login - leave blank if no username/password required

Used documentation

Discussions on the web