Dactyl ManuForm Mini Keyboard

This is a fork of the Dactyl-ManuForm. The Dactyl-Manuform is a fork of the Dactyl with the thumb cluster from ManuForm.

Custom Dactyl Mini

A Dactyl Mini completely reworked to use Affine Transformations, Bezier Curves and splines and Openscads Polyhedrons to build most of the model.

It has per column Stagger, Splay, Curvature and tilt along with a "flatter" thumb cluster

It also supports a tps-65 trackpad, st7789 screen, GX16 connecters for split transport and a rp2040 plus board

The use of sidenubs can be disabled. Sidenub should be disabled if you use Kailh, and Outemu. If you use Cherry MX, Gateron or Zealios switches, you can enable the sidenubs.
Spaces for rentention tabs are added.
One key in the thumb cluster has been removed. Other thumb keys are also adjusted.
The total height is reduced and wire posts are removed. This results in a higher printing speed and a lower cost.
Screw posts are moved inside. The holes are designed for TRISERT® thread inserts 145m3.
A GX16 Mount is used instead of TRRS, code adapted from https://gist.github.com/jamiehs/de163e7d469e4fb4220e504b58613806
Blackpill f411 holder adapted from https://github.com/darrenph1/dactyl-keyboard
oled slot and mounting area (left-section) adapted from https://github.com/oysteinkrog/dactyl-manuform-mini-keyboard
encoder hole from https://github.com/oysteinkrog/dactyl-manuform-mini-keyboard
Thumb trackball and thumb area adapted from https://github.com/noahprince22/tractyl-manuform-keyboard
Tenting stand and palm rest from https://github.com/noahprince22/tractyl-manuform-keyboard
Adafruit IS31FL3731 screw mounts
Joycon Joystick mounting (designed for the left hand so has to be mirrored)
Cirque TM040040 Mount
Mounting for Toggle Switch with Cover (Example https://thepihut.com/products/illuminated-toggle-switch-with-cover-red)

Run lein generate or lein auto generate
This will regenerate the things/*.scad files
Use OpenSCAD to open a .scad file.
Make changes to design, repeat load-file, OpenSCAD will watch for changes and rerender.
When done, use OpenSCAD to export STL files

The source code for generating the models is distributed under the GNU AFFERO GENERAL PUBLIC LICENSE Version 3.