LEGO/lego-ble-wireless-protocol-docs
This repository contains information about LEGO Hubs (name, battery level, etc.) and to interact with any sensors and motors connected to it.
MIT
Issues
- 2
- 3
Machine readable specification of the protocol
#14 opened by janvrany - 9
acceleration and deceleration
#23 opened by valentinptc - 1
Explain usage of Encoder Preset: {0x0b,0x00,0x81,0x01,0x11,0x51,0x02,0x5a,0x00,0x00,0x00};
#17 opened by marcrupprath - 5
3.18.1 Format of Port Input Format Setup (CombinedMode) > Sub Command = 0x01 SetModeDataSet combination(s)
#22 opened by Vouzamo - 1
Hub Attached IO init messages too fast
#29 opened by tthiery - 2
LEGO Super Mario protocol?
#20 opened by dolmen - 1
Outdated Specification
#27 opened by tthiery - 5
- 1
StartPower(Power1, Power2) command type
#15 opened by laurentchar - 2
missing device ids
#24 opened by lpfquest - 0
typo at chapter 6.1
#26 opened by lpfquest - 0
typo at chapter 3.29.1
#25 opened by lpfquest - 1
- 3
- 1
Please Explain Encoder Math, How to drive XL Motor about 120° with 50 % speed
#18 opened by marcrupprath - 0
- 1
- 0
Small docs issue
#9 opened by undera - 2
- 1
Link to github.io page
#7 opened by dlech - 0
- 0
- 0
- 0