Clusterio

Discord for development/support/play: https://discord.gg/5XuDkje

Important notice

Clusterio 2.0 is still in alpha, however the previous stable has been abandoned and is no longer supported. Despite being alpha it's reasonably stable now and there's no major breakages expected before a stable release of 2.0. If you are starting a new cluster, it's highly recommended to use the 2.0 alpha.

Ways to support me/the project:

Contribute with code/documentation. See Contributing for how to make pull requests. Always nice to move the project forward.
Support me monetarily on patreon or paypal: danielv@live.no

Introduction
Features
Plugins
Installation
Configure Controller
Managing Factorio mods
Setting up shared storage
Running Clusterio
Setting up remote hosts
Setting up clusterioctl
Common problems

Introduction

Clusterio is a clustered Factorio server manager that provides the tooling for implementing cross server interactions in Factorio. It was previously best known for implementing cross server transfer and cloud storage of items via teleporter chests. But this functionality has been pulled out of Clusterio into its own plugin for Clusterio named Subspace Storage.

By itself Clusterio doesn't change the gameplay in any way, you could even use Clusterio to manage completely vanilla Factorio servers. Plugins do the work of modding in the visible changes into the game, see the Plugins section for ready-made plugins you can install into a Clusterio cluster.

Features

Clustered Factorio server management allowing you manage the running of Factorio servers across a fleet of physical servers from both a web interface and a command line interface.
User list management for synchronizing in-game admins, whitelisted users, and bans to all the servers in the cluster.
Integrated support for exporting statistics for the whole cluster to Prometheus via a single metrics endpoint.
Extensive plugin support for adding your own cross server features to Factorio using Clusterio's communication backbone.

Plugins

The heart of Clusterio is its plugin system. Plugins add functionality to Factorio servers, Clusterio itself or both. These are the plugins supported and maintained by the Clusterio developers:

Global Chat: share the in-game chat between servers.
Research Sync: synchronize research progress and technologies unlocked between servers.
Statistics Exporter: collect in-game statistics from all the servers and makes it available to the Prometheus endpoint on the controller.
Subspace Storage: Provide shared storage that can transport items between servers via teleport chests.
Player Auth: Provides authentication to the cluster via logging into a Factorio server.
Inventory Sync: Synchronizes your inventory between servers.

There's also plugins developed and maintained by the community:

Discord Bridge (@hornwitser/discord_bridge): Bridges chat between instances and Discord. By Hornwitser.
Server Select (@hornwitser/server_select): In-game GUI for connecting to other servers in the cluster. Originally by Godmave, ported to 2.0 by Hornwitser.

Want to make your own plugin? Check out the documentation on Writing Plugins for where to start.

Installation

Clusterio runs on Node.js v18 and up, it's distributed via npm and comes with a guided install script. If you already have a recent Node.js installed, you can set it up in a new directory with:

npm init "@clusterio"

Otherwise see below for OS specific instructions.

Ubuntu setup

Install Node.js v18 or higher. Note the version of Node.js provided by the Ubuntu/debian repos are too old and you will have to use the nodesource PPA
```
curl -fsSL https://deb.nodesource.com/setup_20.x | sudo -E bash - &&\
sudo apt-get install -y nodejs
```
Log in as the user you wish to install Clusterio as (do not use root), and then create a new directory and run the Clusterio installer:
```
mkdir clusterio
cd clusterio
npm init "@clusterio"
```
Make sure to note down the admin authentication token it provides at the end as you will need it later.
Optionally copy the generated systemd service files in systemd folder to /etc/systemd/system/.

Ubuntu with Docker

The Docker support for Clusterio is currently broken. If you need it open an issue about it.

Windows setup

Download and install the latest LTS release from http://nodejs.org.
Create a new empty directory for the installation and navigate into it. Open a PowerShell window in this new directory by Shift+Right clicking inside it and choosing "Open PowerShell window here" and then run the following command.
```
npm init "@clusterio"
```
Make sure to note down the admin authentication token it provides at the end as you will need it later.
If you chose to use local factorio directory for the Factorio installation, download the Windows 64-bit zip package from https://www.factorio.com/download and extract it to the factorio folder in your clusterio installation folder.

MacOS Setup

Install the latest Node.js LTS release from http://nodejs.org or use brew (brew install node).
Open Terminal or Command prompt in the directory you want to install to and run the following commands.
```
mkdir clusterio
cd clusterio
npm init "@clusterio"
```
Make sure to note down the admin authentication token it provides at the end as you will need it later.
If you chose to use local factorio directory for the Factorio installation, you will need to obtain and copy a mac version of Factorio and unpack it to the factorio folder in your clusterio installation folder.

Installing Plugins

For well-known plugins you can select them during installation and no further steps are necessary to make them work. Installing plugins that are not offered by the installer consists of two steps. First install the package the plugin is provided by via npm, for example

npm install @clusterio/plugin-subspace_storage

Then tell clusterio that this plugin exists by adding it as a plugin.

npx clusteriocontroller plugin add @clusterio/plugin-subspace_storage

This adds it to the default plugin-list.json file which in the shared folder setup is loaded by controller, host and ctl. If you have hosts or ctl installed on separate computers (or directories) then you need to repeat the plugin install process for all of them. The clusteriocontroller, clusteriohost and clusterioctl commands has the plugin sub-command so you do not need to install clusteriocontroller to add plugins, instead use the clusterio command you have available.

For development purposes the plugin add command supports adding plugins by the absolute path to them, or a relative path that must start with either . or .. (which will then be resolved to an absolute path).

Configure Controller

By default the controller will listen for HTTP on port 8080. You can change the port used with the command

npx clusteriocontroller config set controller.http_port 1234

When changing the port you will also need to change the address hosts connect with. For the standalone installation mode you can use

npx clusteriohost config set host.controller_url http://localhost:1234/

If you plan to make your cluster available externally set the address that it will be accessible under with, for example

npx clusteriocontroller config set controller.external_address http://203.0.113.4:1234/

Change the url to reflect the IP, protocol, and port the controller is accessible under, dns names are also supported. If you're planning on making the controller accessible on the internet it's recommended to set up TLS, see the Setting Up TLS document for more details.

You can list the config of the controller with the npx clusteriocontroller config list command. See the readme for @clusterio/controller for more information.

Managing Factorio mods

Clusterio currently only provides a manual method for running mods on servers by copying them either to each instance's individual mods folder, or by copying them into a host installation's sharedMods folder which will link/copy them to the mods folder of each instance on that host if the file doesn't already exist in the mods folder for that instance. Mods are copied from sharedMods on Windows and symlinked on Linux, this means that when mods are removed from sharedMods the mods will also be removed from the instance's mods folder on Linux if it got there by being linked by Clusterio, but not on Windows.

For managing the mod settings, the mod-settings.dat and mod-list.json files will also be linked/copied over if present in sharedMods, but since Factorio creates these files automatically it might be necessary to delete them from each instance's mods folder for changes to them in sharedMods to take effect.

Better remote management of mods is a planned feature.

Setting up shared storage

The chests teleporting items to and from the shared storage on the controller has been moved into the Subspace Storage mod and plugin. To get this to work you will need to install the Subspace Storage plugin and copy the Subspace Storage mod and the Clusterio Lib mod into the sharedMods folder on each host installation.

Do not install the Clusterio mod, this was for the old 1.2.x version of Clusterio and is not compatible with Clusterio 2.0.

Running Clusterio

After completing the installation start up the controller and at least one host separately. The installer provides the run-controller and run-host scripts to make this simple. Once the controller process is running you can log into the web interface which is hosted by default on http://localhost:8080/ (adjust the port number if you changed it), use the admin authentication token provided from the installation to log in.

The basics of setting up a Factorio server from the web interface is to create an instance, assign it to a host and then click start.

Running via Systemd

The install script creates systemd service scripts for clusteriocontroller and clusteriohost (if applicable) to start up as the user than ran the installer. If you have copied these files over to /etc/systemd/system/ then you can startup Clusterio as a background service using:

To start as a service run:

sudo systemctl start clusteriocontroller # for the controller
sudo systemctl start clusteriohost # for each physical server intended to host Factorio servers

To automatically get it to start on boot:

sudo systemctl enable clusteriocontroller # for the controller
sudo systemctl enable clusteriohost # for each physical server intended to host Factorio servers

Setting up remote hosts

Run the installer as described in the installation section and choose "Host only" as the operating mode to install, it'll ask for a controller URL and an authentication token. The URL is the same as what is needed to connect to the web interface, and the authentication token can be generated on the Hosts page in the web interface. Once you start up the host it should show up in the Hosts list and be available for assigning and running instances on.

Setting up clusterioctl

There's a command line interface available for Clusterio which is installed separately with the same installer as for the controller and host. Run the installer as described in the installation section and choose "Ctl only" as the operating mode to install, you can do this in the same directory as you have installed other Clusterio component(s) to. The installer will ask for a controller URL and an authentication token, these are the same as you would use to connect to the web interface. If you want to use a different user for the command line interface, you can generate an authentication token for an existing user with

npx clusteriocontroller bootstrap generate-user-token <username>

Common problems

EACCESS [...] LISTEN 443

Some systems don't let non root processes listen to ports below 1000. Either run with sudo or change config.json to use higher port numbers.

According to this link if you manually installed node.js following the above instructions, you may need to run the following command to fix this issue:

sudo setcap 'cap_net_bind_service=+ep' $(readlink -f $(which node))

Port forwarding doesn't work on the controller when running under WSL

If you follow the ubuntu guide on WSL (Windows Subsystem for Linux, Bash on Ubuntu on Windows specifically), you will find that the website works on localhost and on your local ip, but not on the global ip. This is also true when you correctly port-forwarded the correct ports. Even when routing this server through nginx in WSL, the issue persists. Then, on a hunch, I tried to run nginx from windows itself and found that this DID work. It came to me that the only usage difference between the 2 versions of nginx is that I got a Windows Firewall popup.

TLDR: the tested fix is:

open your windows firewall and go to advanced settings
click on inbound rules and click on new rule...
select port and click next >
select TCP and select specific local ports and type in the ports that you want to open (comma separated) and click next > 3 times
give the rule a name (like 'web server' or something), give it a description (optionally) and click finish

Laar/clusterio