Redragon RGB Controller

A NodeJS project for sending USB HID commands to Redragon's peripherals.

This project uses the wonderful library node-hid.

This project was made on top of reverse engineering the peripherals USB protocols!

Usage

Clone the repository
Install the dependencies by running npm install or yarn
Run node index.js <target> <color>
- Being target only -> keyboard, mouse and both
- Being color the hex representation of the desired color withtout # (Ex: FF00FF)
- Ex: node index.js both FF0000 for setting both keyboard and mouse to the red color.
Windows only Consider running it as administrator, if it doesn't work properly
You're all set!

The devices bellow were tested and currently working, please open an Issue if your device is not supported.

If you want to support the project by adding support to new devices, here's the overall process.

Starting USB capture WireShark with USBPCap
Changing the color (Or other property) on the original software
Stop the capture
Analyse a pattern of "HOST -> DEVICE" then "DEVICE -> HOST" more than once and sequential
Usually it starts with the profile being set, the color, and the last one is the 'apply' command
After that is just a matter of changing the raw bytes on the code

Reverse engineering of the Redragon mouse single color command
Reverse engineering of the Redragon keyboard single color command
Add a CLI program to interface with the library
Reverse engineering of the brightness value command
Reverse engineering of the effect type value command
Standalone tcp server for remote controlling, possible Alexa/GAssistant skills
Add audio responsive commands (At the time, as a separated program, only working with the microphone response)