LibreSolar/bms-c1

Issues

• Thermal Performance Tests

  #42 opened a year ago by pasrom
  4

•  "CHG+"How to use it?

  #64 opened a month ago by HGQ21102
  1

• Support for daisy chaining (or otherwise connecting) multiple LibreSolar BMS for stackable energy storage packs

  #63 opened 3 months ago by rexlee2
  2

• .

  #59 opened 4 months ago by 0xjairo
  0

• Fix NPTH clearance in v0.4

  #55 opened 7 months ago by devbotas
  5

• CAN bus testing

  #57 opened 8 months ago by Ananyaaynana
  2

• Minor - correction on schematics

  #49 opened 10 months ago by robm0162
  1

• In file bq769x2_emul. c, The size defined by subcmd_mem seems to exceed the actual required size

  #51 opened 10 months ago by yangminglong
  2

• Clarification needed on copper thickness of inner PCB layers

  #47 opened a year ago by Selvakumar58
  5

• "flashing quickly" LED won't stop

  #45 opened a year ago by userakii
  11

• BMS non-responsive after working for a few minutes.

  #44 opened a year ago by Morynmoh
  5

• Overvoltage and Undervoltage Testing Issue with BMS_C1 Board

  #43 opened a year ago by Ananyaaynana
  6

• ESP32 CAN bus

  #30 opened a year ago by B-hafedh
  2

• Footprints for thermal jumpers?

  #5 opened a year ago by EarthLord
  7

• stock of BQ76952 and BQ76942

  #21 opened a year ago by photon-delight
  1

• Connector for programming

  #8 opened a year ago by martinjaeger
  7

• D16 Schottky diode inverted?

  #40 opened 2 years ago by LorenzoGuerro
  2

• Plan for board to board connections

  #4 opened 2 years ago by EarthLord
  12

• Necessity for two WP-BUCF connectors in parallel?

  #3 opened 2 years ago by EarthLord
  7

• Switching off with button does not work

  #26 opened 2 years ago by martinjaeger
  5

• Thermal performance of N-MOS switches

  #27 opened 2 years ago by EarthLord
  5

• Hardware v0.3 Testing - Tracking Issue

  #37 opened 2 years ago by martinjaeger
  7

• Intention of CHG+ pad

  #39 opened 2 years ago by nik21-nik
  2

• BMS-C1: Kicad Library

  #38 opened 2 years ago by joshuasiumao
  1

• Via stitching between layer IN1 and layer IN2

  #23 opened 2 years ago by jalinei
  1

• Q12 has wrong pinout

  #36 opened 2 years ago by martinjaeger
  0

• The status of the project

  #35 opened 2 years ago by Linjieqiang
  6

• GPIO9 (BOOT) pin not broken out

  #34 opened 2 years ago by martinjaeger
  0

• Option for CAN bus split termination

  #15 opened 2 years ago by EarthLord
  6

• BAT+, CHG+ and PACK+ voltage measurment

  #31 opened 2 years ago by EarthLord
  5

• Cell Balancing

  #32 opened 2 years ago by B-hafedh
  1

• Power PCB: R2 has wrong package

  #25 opened 2 years ago by martinjaeger
  3

• C39 must be 100V and larger package

  #24 opened 2 years ago by martinjaeger
  1

• Current shunt footprint recommendation

  #28 opened 2 years ago by EarthLord
  2

• schottky diode selection

  #33 opened 2 years ago by B-hafedh
  0

• Charge pump capacitor value estimation

  #29 opened 2 years ago by B-hafedh
  3

• What dose this P-MOSFET do?

  #20 opened 3 years ago by shivanshumahim
  2

• Via for all decoupling caps to GND layer

  #16 opened 3 years ago by EarthLord
  1

• Creepage distance Battery voltage

  #10 opened 3 years ago by JochenKr
  4

• Thermal performance of balancing bleed resistors

  #13 opened 3 years ago by EarthLord
  3

• Tracks running under Y1 resonator

  #17 opened 3 years ago by jalinei
  1

• How to better stitch the ground plane ?

  #18 opened 3 years ago by jalinei
  1

• U1 regulator might get hot

  #19 opened 3 years ago by jalinei
  1

• Gate protection diodes of Mosfets

  #12 opened 3 years ago by JochenKr
  1

• Ground on BQ76952

  #11 opened 3 years ago by JochenKr
  4

• Internal power supply paths

  #22 opened 3 years ago by martinjaeger
  0

• Voltage rating of D1 and D2 in bms-power-100a

  #14 opened 3 years ago by EarthLord
  3

• Article on bleed resistors

  #6 opened 3 years ago by EarthLord
  0

• 5V Buck converter

  #9 opened 3 years ago by JochenKr
  3

• Choice of ESP32 variant

  #7 opened 3 years ago by EarthLord
  3