LibreSolar/charge-controller-firmware
Firmware for Libre Solar MPPT/PWM charge controllers
C++Apache-2.0
Issues
- 3
MPPT 2420 LC Improvements Required
#125 opened by hogthrob - 2
MPPT 2420 LC "No battery temp sensor" detection does not work anymore on v21.0
#126 opened by hogthrob - 3
- 1
Rework of half bridge driver
#117 opened by martinjaeger - 1
- 2
Missing documentation on how to change battery configuration if using Platformio
#118 opened by hogthrob - 3
Simple adc_get_value function non-existant
#116 opened by luizvilla - 1
Configure ADC filter time constant per channel
#105 opened by martinjaeger - 2
DAQ: Overvoltage and undervoltage alert debouncing calculation wrong if sampling frequency != 1kHz
#109 opened by martinjaeger - 0
- 0
Improve error handling
#104 opened by martinjaeger - 0
Pre-setting of voltage set points
#94 opened by JordanSilverman - 2
- 0
Offload ThingSet processing to dedicated thread
#103 opened by martinjaeger - 1
Check total energy calculation
#83 opened by martinjaeger - 1
- 1
Load not switching on with 24V system
#96 opened by DeeFuse - 1
Not charging with 24V system
#95 opened by DeeFuse - 2
- 4
- 3
Merge state machines and error flags
#91 opened by martinjaeger - 1
- 2
Dead link on this Github page
#84 opened by itofficeeu - 8
Revisit temperature limits and report over/under-temp load shutdown correctly
#59 opened by martinjaeger - 6
Artificial current limit
#79 opened by hogthrob - 1
- 18
Support load by solar power if battery is discharging but not discharged "enough"
#50 opened by hogthrob - 2
Module and function descriptions
#57 opened by azeemshatp - 3
Implement global debug print function
#58 opened by martinjaeger - 1
- 2
- 16
- 3
- 3
- 36
MPPT-2420-LC support status
#30 opened by hogthrob - 3
- 0
Rename typedef structs to avoid _t
#42 opened by martinjaeger - 6
Deep discharge counter: strange behavior
#39 opened by martinjaeger - 0
Rewrite LED module
#28 opened by martinjaeger - 0
- 39
Development Branch: Battery Pack Configuration
#13 opened by hogthrob - 1
Add support for 12V / 24V recognition
#1 opened by martinjaeger - 1
battery current
#6 opened by tasiek30 - 2
- 1
- 2
- 2
- 4
- 1
Add watchdog
#4 opened by martinjaeger - 1