Lora-net/sx1302_hal
SX1302/SX1303 Hardware Abstraction Layer and Tools (packet forwarder...)
CNOASSERTION
Issues
- 5
Building issue
#62 opened - 10
- 2
- 9
Permit temperature sensor to be optional
#58 opened - 1
Source for STM32 MCU firmware
#57 opened - 1
- 4
- 4
Packet Loss in SX1302
#53 opened - 2
- 2
Same uplink but two rxpk
#48 opened - 1
- 1
- 2
- 0
- 0
The difference between rxpk and txpk
#42 opened - 3
- 1
- 1
- 1
Can we set TX_JIT_DELAY to 60ms?
#38 opened - 4
- 1
AGC_status not available
#36 opened - 1
Failed To calibrate
#35 opened - 1
- 2
- 3
Packet Drop, USB vs SPI
#30 opened - 9
- 1
- 1
Stuck in "sx1302_agc_start" function
#26 opened - 1
Branch master-fdd-cn490
#25 opened - 1
- 4
Packet drop in Sx1302
#23 opened - 0
Cannot start lora service
#22 opened - 8
cross compiling
#20 opened - 3
- 7
LEDs in design not lighting up
#16 opened - 5
SX1261 in corecell design
#15 opened - 9
- 2
- 12
- 1
Compatibility with SX1301
#9 opened - 1
- 0
- 1
Meaning of RSSI values
#6 opened - 1
tx test application CRC
#5 opened - 1
- 2
CoreCell Interface board
#3 opened - 1
"foff" calculated method
#2 opened - 3
full duplex supported?
#1 opened