minimal is just that – a minimal practical BPF application example. It
doesn't use or require BPF CO-RE, so should run on quite old kernels. It
installs a tracepoint handler which is triggered once every second. It uses
bpf_printk() BPF helper to communicate with the world. To see it's output,
read /sys/kernel/debug/tracing/trace_pipe file as a root:
$ cd examples/c
$ make minimal
$ sudo ./minimal
$ sudo cat /sys/kernel/debug/tracing/trace_pipe
<...>-3840345 [010] d... 3220701.101143: bpf_trace_printk: BPF triggered from PID 3840345.
<...>-3840345 [010] d... 3220702.101265: bpf_trace_printk: BPF triggered from PID 3840345.minimal is great as a bare-bones experimental playground to quickly try out
new ideas or BPF features.
This version of minimal is modified to allow running on even older kernels
that do not allow global variables. bpf_printk uses global variables unless
BPF_NO_GLOBAL_DATA is defined before including bpf_helpers.h. Additionally,
the global variable my_pid has been replaced with an array of one element to
hold the process pid.
$ cd examples/c
$ make minimal_legacy
$ sudo ./minimal_legacy
$ sudo cat /sys/kernel/debug/tracing/trace_pipe
minimal_legacy-52030 [001] .... 491227.784078: 0x00000001: BPF triggered from PID 52030.
minimal_legacy-52030 [001] .... 491228.840571: 0x00000001: BPF triggered from PID 52030.
minimal_legacy-52030 [001] .... 491229.841643: 0x00000001: BPF triggered from PID 52030.
minimal_legacy-52030 [001] .... 491230.842432: 0x00000001: BPF triggered from PID 52030.
bootstrap is an example of a simple (but realistic) BPF application. It
tracks process starts (exec() family of syscalls, to be precise) and exits
and emits data about filename, PID and parent PID, as well as exit status and
duration of the process life. With -d <min-duration-ms> you can specify
minimum duration of the process to log. In such mode process start
(technically, exec()) events are not output (see example output below).
bootstrap was created in the similar spirit as
libbpf-tools from
BCC package, but is designed to be more stand-alone and with simpler Makefile
to simplify adoption to user's particular needs. It demonstrates the use of
typical BPF features:
- cooperating BPF programs (tracepoint handlers for process
execandexitevents, in this particular case); - BPF map for maintaining the state;
- BPF ring buffer for sending data to user-space;
- global variables for application behavior parameterization.
- it utilizes BPF CO-RE and vmlinux.h to read extra process information from
kernel's
struct task_struct.
bootstrap is intended to be the starting point for your own BPF application,
with things like BPF CO-RE and vmlinux.h, consuming BPF ring buffer data,
command line arguments parsing, graceful Ctrl-C handling, etc. all taken care
of for you, which are crucial but mundane tasks that are no fun, but necessary
to be able to do anything useful. Just copy/paste and do simple renaming to get
yourself started.
Here's an example output in minimum process duration mode:
$ sudo ./bootstrap -d 50
TIME EVENT COMM PID PPID FILENAME/EXIT CODE
19:18:32 EXIT timeout 3817109 402466 [0] (126ms)
19:18:32 EXIT sudo 3817117 3817111 [0] (259ms)
19:18:32 EXIT timeout 3817110 402466 [0] (264ms)
19:18:33 EXIT python3.7 3817083 1 [0] (1026ms)
19:18:38 EXIT python3 3817429 3817424 [1] (60ms)
19:18:38 EXIT sh 3817424 3817420 [0] (79ms)
19:18:38 EXIT timeout 3817420 402466 [0] (80ms)
19:18:43 EXIT timeout 3817610 402466 [0] (70ms)
19:18:43 EXIT grep 3817619 3817617 [1] (271ms)
19:18:43 EXIT timeout 3817609 402466 [0] (321ms)
19:18:44 EXIT iostat 3817585 3817531 [0] (3006ms)
19:18:44 EXIT tee 3817587 3817531 [0] (3005ms)
...uprobe is an example of dealing with user-space entry and exit (return) probes,
uprobe and uretprobe in libbpf lingo. It attached uprobe and uretprobe
BPF programs to its own functions (uprobed_add() and uprobed_sub()) and logs input arguments
and return result, respectively, using bpf_printk() macro. The user-space
function is triggered once every second:
$ sudo ./uprobe
libbpf: loading object 'uprobe_bpf' from buffer
...
Successfully started!
...........You can see uprobe demo output in /sys/kernel/debug/tracing/trace_pipe:
$ sudo cat /sys/kernel/debug/tracing/trace_pipe
uprobe-1809291 [007] .... 4017233.106596: 0: uprobed_add ENTRY: a = 0, b = 1
uprobe-1809291 [007] .... 4017233.106605: 0: uprobed_add EXIT: return = 1
uprobe-1809291 [007] .... 4017233.106606: 0: uprobed_sub ENTRY: a = 0, b = 0
uprobe-1809291 [007] .... 4017233.106607: 0: uprobed_sub EXIT: return = 0
uprobe-1809291 [007] .... 4017234.106694: 0: uprobed_add ENTRY: a = 1, b = 2
uprobe-1809291 [007] .... 4017234.106697: 0: uprobed_add EXIT: return = 3
uprobe-1809291 [007] .... 4017234.106700: 0: uprobed_sub ENTRY: a = 1, b = 1
uprobe-1809291 [007] .... 4017234.106701: 0: uprobed_sub EXIT: return = 0usdt is an example of dealing with USDT probe. It attaches USDT BPF programs to
the libc:setjmp probe, which is triggered by calling setjmp in user-space program once per second and logs USDT arguments using bpf_printk() macro:
$ sudo ./usdt
libbpf: loading object 'usdt_bpf' from buffer
...
Successfully started!
...........You can see usdt demo output in /sys/kernel/debug/tracing/trace_pipe:
$ sudo cat /sys/kernel/debug/tracing/trace_pipe
usdt-1919077 [005] d..21 537310.886092: bpf_trace_printk: USDT auto attach to libc:setjmp: arg1 = 55d03d6a42a0, arg2 = 0, arg3 = 55d03d65e54e
usdt-1919077 [005] d..21 537310.886105: bpf_trace_printk: USDT manual attach to libc:setjmp: arg1 = 55d03d6a42a0, arg2 = 0, arg3 = 55d03d65e54e
usdt-1919077 [005] d..21 537311.886214: bpf_trace_printk: USDT auto attach to libc:setjmp: arg1 = 55d03d6a42a0, arg2 = 0, arg3 = 55d03d65e54e
usdt-1919077 [005] d..21 537311.886227: bpf_trace_printk: USDT manual attach to libc:setjmp: arg1 = 55d03d6a42a0, arg2 = 0, arg3 = 55d03d65e54efentry is an example that uses fentry and fexit BPF programs for tracing. It
attaches fentry and fexit traces to do_unlinkat() which is called when a
file is deleted and logs the return value, PID, and filename to the
trace pipe.
Important differences, compared to kprobes, are improved performance and usability. In this example, better usability is shown with the ability to directly dereference pointer arguments, like in normal C, instead of using various read helpers. The big distinction between fexit and kretprobe programs is that fexit one has access to both input arguments and returned result, while kretprobe can only access the result.
fentry and fexit programs are available starting from 5.5 kernels.
$ sudo ./fentry
libbpf: loading object 'fentry_bpf' from buffer
...
Successfully started!
..........The fentry output in /sys/kernel/debug/tracing/trace_pipe should look
something like this:
$ sudo cat /sys/kernel/debug/tracing/trace_pipe
rm-9290 [004] d..2 4637.798698: bpf_trace_printk: fentry: pid = 9290, filename = test_file
rm-9290 [004] d..2 4637.798843: bpf_trace_printk: fexit: pid = 9290, filename = test_file, ret = 0
rm-9290 [004] d..2 4637.798698: bpf_trace_printk: fentry: pid = 9290, filename = test_file2
rm-9290 [004] d..2 4637.798843: bpf_trace_printk: fexit: pid = 9290, filename = test_file2, ret = 0kprobe is an example of dealing with kernel-space entry and exit (return)
probes, kprobe and kretprobe in libbpf lingo. It attaches kprobe and
kretprobe BPF programs to the do_unlinkat() function and logs the PID,
filename, and return result, respectively, using bpf_printk() macro.
$ sudo ./kprobe
libbpf: loading object 'kprobe_bpf' from buffer
...
Successfully started!
...........The kprobe demo output in /sys/kernel/debug/tracing/trace_pipe should look
something like this:
$ sudo cat /sys/kernel/debug/tracing/trace_pipe
rm-9346 [005] d..3 4710.951696: bpf_trace_printk: KPROBE ENTRY pid = 9346, filename = test1
rm-9346 [005] d..4 4710.951819: bpf_trace_printk: KPROBE EXIT: ret = 0
rm-9346 [005] d..3 4710.951852: bpf_trace_printk: KPROBE ENTRY pid = 9346, filename = test2
rm-9346 [005] d..4 4710.951895: bpf_trace_printk: KPROBE EXIT: ret = 0xdp is an example written in Rust (using libbpf-rs). It attaches to
the ingress path of networking device and logs the size of each packet,
returning XDP_PASS to allow the packet to be passed up to the kernel’s
networking stack.
$ sudo ./target/release/xdp 1
..........The xdp output in /sys/kernel/debug/tracing/trace_pipe should look
something like this:
$ sudo cat /sys/kernel/debug/tracing/trace_pipe
<...>-823887 [000] d.s1 602386.079100: bpf_trace_printk: packet size: 75
<...>-823887 [000] d.s1 602386.079141: bpf_trace_printk: packet size: 66
<...>-2813507 [000] d.s1 602386.696702: bpf_trace_printk: packet size: 77
<...>-2813507 [000] d.s1 602386.696735: bpf_trace_printk: packet size: 66tc (short for Traffic Control) is an example of handling ingress network traffics.
It creates a qdisc on the lo interface and attaches the tc_ingress BPF program to it.
It reports the metadata of the IP packets that coming into the lo interface.
$ sudo ./tc
...
Successfully started! Please run `sudo cat /sys/kernel/debug/tracing/trace_pipe` to see output of the BPF program.
......The tc output in /sys/kernel/debug/tracing/trace_pipe should look
something like this:
$ sudo cat /sys/kernel/debug/tracing/trace_pipe
node-1254811 [007] ..s1 8737831.671074: 0: Got IP packet: tot_len: 79, ttl: 64
sshd-1254728 [006] ..s1 8737831.674334: 0: Got IP packet: tot_len: 79, ttl: 64
sshd-1254728 [006] ..s1 8737831.674349: 0: Got IP packet: tot_len: 72, ttl: 64
node-1254811 [007] ..s1 8737831.674550: 0: Got IP packet: tot_len: 71, ttl: 64
profile is an example written in Rust and C with BlazeSym. It
attaches to perf events, sampling on every processor periodically. It
shows addresses, symbols, file names, and line numbers of stacktraces.
$ sudo ./target/release/profile
COMM: swapper/6 (pid=0) @ CPU 6
Kernel:
0 [<ffffffff81bdf010>] intel_idle+0x96
1 [<ffffffff819959b0>] cpuidle_enter_state+0x80 /ro/source/drivers/cpuidle/cpuidle.c:238
2 [<ffffffff81995cc9>] cpuidle_enter+0x29 /ro/source/drivers/cpuidle/cpuidle.c:353
3 [<ffffffff810f8c0b>] do_idle+0x1bb /ro/source/kernel/sched/idle.c:243
4 [<ffffffff810f8de9>] cpu_startup_entry+0x19 /ro/source/kernel/sched/idle.c:396
5 [<ffffffff81044f46>] start_secondary+0x116 /ro/source/arch/x86/kernel/smpboot.c:272
6 [<ffffffff810000f5>] secondary_startup_64_no_verify+0xb0 /ro/source/arch/x86/kernel/head_64.S:283
No Userspace StackC version and Rust version show the same content. Both of them use BlazeSym to symbolize stacktraces.
sockfilter is an example of monitoring packet and dealing with __sk_buff
structure. It attaches socket BPF program to sock_queue_rcv_skb() function
and retrieve information from BPF_MAP_TYPE_RINGBUF, then print
protocol, src IP, src port, dst IP, dst port in standard output.
Currently, most of the IPv4 protocols defined in uapi/linux/in.h are included,
please check ipproto_mapping of examples/c/sockfilter.c for the supported protocols.
$ sudo ./sockfilter
interface:lo protocol: UDP 127.0.0.1:51845(src) -> 127.0.0.1:53(dst)
interface:lo protocol: UDP 127.0.0.1:41552(src) -> 127.0.0.1:53(dst)libbpf-bootstrap supports multiple build systems that do the same thing. This serves as a cross reference for folks coming from different backgrounds.
You will need clang, libelf and zlib to build the examples, package names may vary across distros.
On Ubuntu/Debian, you need:
$ apt install clang libelf1 libelf-dev zlib1g-devOn CentOS/Fedora, you need:
$ dnf install clang elfutils-libelf elfutils-libelf-devel zlib-develDownload the git repository and check out submodules:
$ git clone --recurse-submodules https://github.com/libbpf/libbpf-bootstrapMakefile build:
$ git submodule update --init --recursive # check out libbpf
$ cd examples/c
$ make
$ sudo ./bootstrap
TIME EVENT COMM PID PPID FILENAME/EXIT CODE
00:21:22 EXIT python3.8 4032353 4032352 [0] (123ms)
00:21:22 EXEC mkdir 4032379 4032337 /usr/bin/mkdir
00:21:22 EXIT mkdir 4032379 4032337 [0] (1ms)
00:21:22 EXEC basename 4032382 4032381 /usr/bin/basename
00:21:22 EXIT basename 4032382 4032381 [0] (0ms)
00:21:22 EXEC sh 4032381 4032380 /bin/sh
00:21:22 EXEC dirname 4032384 4032381 /usr/bin/dirname
00:21:22 EXIT dirname 4032384 4032381 [0] (1ms)
00:21:22 EXEC readlink 4032387 4032386 /usr/bin/readlink
^CCMake build:
$ git submodule update --init --recursive # check out libbpf
$ mkdir build && cd build
$ cmake ../examples/c
$ make
$ sudo ./bootstrap
<...>XMake build (Linux):
$ git submodule update --init --recursive # check out libbpf
$ cd examples/c
$ xmake
$ xmake run bootstrapXMake build (Android):
$ git submodule update --init --recursive # check out libbpf
$ cd examples/c
$ xmake f -p android
$ xmakeInstall Xmake
$ bash <(wget https://xmake.io/shget.text -O -)
$ source ~/.xmake/profileInstall libbpf-cargo:
$ cargo install libbpf-cargoBuild using cargo:
$ cd examples/rust
$ cargo build --release
$ sudo ./target/release/xdp 1
<...>Libbpf debug logs are quire helpful to pinpoint the exact source of problems, so it's usually a good idea to look at them before starting to debug or posting question online.
./minimal is always running with libbpf debug logs turned on.
For ./bootstrap, run it in verbose mode (-v) to see libbpf debug logs:
$ sudo ./bootstrap -v
libbpf: loading object 'bootstrap_bpf' from buffer
libbpf: elf: section(2) tp/sched/sched_process_exec, size 384, link 0, flags 6, type=1
libbpf: sec 'tp/sched/sched_process_exec': found program 'handle_exec' at insn offset 0 (0 bytes), code size 48 insns (384 bytes)
libbpf: elf: section(3) tp/sched/sched_process_exit, size 432, link 0, flags 6, type=1
libbpf: sec 'tp/sched/sched_process_exit': found program 'handle_exit' at insn offset 0 (0 bytes), code size 54 insns (432 bytes)
libbpf: elf: section(4) license, size 13, link 0, flags 3, type=1
libbpf: license of bootstrap_bpf is Dual BSD/GPL
...