Issues
- 2
Exception in battery.py line #937
#1084 opened by chaerle - 8
Renogy - Multi battery setup documentation
#1099 opened by mr-manuel - 3
LLT/JBD BMS BLE - Lost bluetooth connection to 2 BMS
#1088 opened by WP-Rue - 0
LiTime BMS
#1097 opened by calledit - 12
CVL much too high
#1094 opened by MatKra89 - 4
Max Charge Current not working
#1096 opened by wetty - 18
JKBMS BLE - Throws alarm #31
#1089 opened by rver2024 - 11
EG4 LL 12v "TypeError" on nightly build
#1091 opened by Justice12t - 4
- 27
External current sensor (smartshunt) in use. JKbms no longer shown as battery monitor
#1061 opened by squowse - 2
New JK-BMS JK-PB2A16S20P Inverter BMS not yet supported?
#1060 opened by pos-ei-don - 29
New JK-BMS JK-B2A8S30P not yet supported?
#1045 opened by Lucifer06 - 6
Unreliable serial communications
#1071 opened by jmaunder - 4
DalyBMS 100% SOC is not achieved and decreases
#1066 opened by e-i-k-e - 17
Driver Fails to Start
#1062 opened by WawaRoo - 27
Random min/max cell voltages go very high or very low in a single read.
#1046 opened by cupertinomiranda - 2
JKBMS Attempting to disconnect every second
#1077 opened by djkakadu - 2
Write configuration to BMS
#1082 opened by waltertheodor - 5
Float Mode => Multiplus II
#1047 opened by Miro-2000 - 2
Python errors in log directly after starting the driver
#1079 opened by salami738 - 5
JK-BMS Soc Reset general solution
#1078 opened by salami738 - 2
- 2
- 13
- 1
SOC reset to 100% with 2 Daly BMS Parallel
#1068 opened by harald0815 - 1
Driver not starting on one battery out of two (Jbd BMS)
#1063 opened by geolin - 25
Very high cpu usage with >1 instance running
#1022 opened by mlauss2 - 20
Using SEPLOS V3 CVL in config.ini seems to be ignored
#1056 opened by HF-SPSler - 3
Battery capacity reduction for C rate computation when a cell goes in to protection.
#1055 opened by AlexdeKairos - 11
Using external current sensor (smart shunt)
#1059 opened by squowse - 4
Calculation of CVL_ICONTROLLER has got corrupted.
#1038 opened by cflenker - 10
Call frequency of CVL_ICONTROLLER
#1041 opened by cflenker - 1
Dbus Serialbattery does not work with new JK Inverter BMS and VE Can post 500kbit/s
#1052 opened by Martinmaker92 - 2
driver no longer works
#1043 opened by ray90408 - 10
No ability to change the unique ID
#1035 opened by ytechie - 4
Crash with LINEAR_LIMITATION_ENABLE = False
#1037 opened by mdkeil - 1
pylontech and daly smart bms different soc
#1027 opened by Micha854 - 4
(JK-BMS) Battery discharges alternatingly when SoC reaches 100 % and no discharge requested
#1034 opened by jjdejong - 1
SOC Reset with 3 Battery Banks
#1032 opened by rolandlueders - 13
- 4
2 batteries with the same unique identifier
#1031 opened by metapixl - 4
- 11
CCL and DCL must go to 0a in the event of Fet soft Charge and/or Discharge goes to off
#1024 opened by AlexdeKairos - 24
Unstable Cerbo after Update from 3.00 to 3.20/3.30/3.40
#1019 opened by gsxarne - 9
SOC reset voltage not reachable and SOC not resetting.
#1018 opened by Rutgerdek - 5
LLT/JBD BLE - Connection to battery not stable
#1013 opened by dsrawding - 1
No connection to bluetooth BMS
#1009 opened by dsrawding - 6
- 3
Daly BMS - Battery connection breaks at ESS min SoC
#1006 opened by Micha854 - 3
Sync SOC of BMS with SOC of Smart- or Lynx-Shunt
#1005 opened by RichieS67