Completing our Counter Application

Objectives

In this lesson, you will learn the following:

How to allow a user to execute the dispatch function by attaching dispatch to event listeners.
The redux flow.

Application Goal

We have built out most of the redux pattern. Don't worry, we'll review it.

For now, let's talk about what we want as a user experience. Here it is: you click on a button, and you see a number on the page go to zero to one. Click again, and you see the number go from one to two. I can see a couple of steps involved in this.

Clicking on the button should change the state.
This change in state should be rendered.

Brief Redux Review

By now, you've learned a lot about redux, but the basic story about it has not changed:

Action -> Reducer -> New State

For example, to increase our state we call dispatch({type: 'INCREASE_COUNT'}). Our dispatch function calls our reducer which updates state, and then we render that view on the page.

In the previous section, we learned that by dispatching an initial action and having a default argument in our reducer, we can set up our initial state.

Rebuild our Dispatch Function and our Reducer

Let's code out this our counter application from scratch.

1. Start by remembering our core fact about how redux works.

action -> reducer -> new state

Ok, let's translate that into code. This means if we pass an action and a previous state to our reducer, the reducer should return the new state.

let state = {count: 0}

function reducer(state, action){
  switch (action.type) {
    case 'INCREASE_COUNT':
      return {count: state.count + 1};
    default:
      return state;
  }
}

Ok copy this into the reducer.js file. Now let's get some feedback that we did this correctly by opening up our index.html file in chrome. From your terminal type open index.html. Now this index file has a link to the reducer.js file, so your code will be accessible from the console - press command+shift+c to open it up. Now let's test the code by calling

reducer({count: 0}, {type: 'INCREASE_COUNT'});

If you see a return value of {count: 1} then give yourself a big smile. :)

Ok, if we type in state, we see that it's unchanged. We need to assign our state to be the return value of our reducer each time that we call the reducer. So how do we do that? Think hard, there's no rush.

Thinking...

2. Wrap the execution of our reducer in a function that we call dispatch

Ok, so we can reassign the state by adding the dispatch function to our reducer.js file. This dispatch function should receive an argument of action. It access the state because it is declared earlier in the file in global scope.

function dispatch(action){
	state = reducer(state, action);
}

Now let's see if this reassigns state. Add this dispatch function in and open or refresh the index.html file in a browser tab. Call dispatch({type: 'INCREASE_COUNT'}). It should return undefined, since dispatch() doesn't return anything, but our state value should have changed! Type in state and see if this is true. State should return {count: 1}. Hurray! More smiles. :) :)

Next problem. Our state says the count is 1, but do you think that is reflected in our HTML? Me neither. Ok, so what function is in charge of that. Give it a shot. I'll be waiting with the answer when you're ready.

3. Use the render function to display our state.

Ok, so now we need a function called render that will place this count on the page.

function render(){
	let container = document.getElementById('container');
	container.textContent = state.count;
}

So now when we call render from the console we should see HTML that reflects the current count. Entering dispatch({type: 'INCREASE_COUNT'}) to change state, then render again should update the number displayed.

Since the two functions go together, the next step is to tie rendering with the dispatch function. Easy enough. Let's alter our dispatch method so that it looks like this:

function dispatch(action){
	state = reducer(state, action);
	render();
}

Ok, so now each time we dispatch an action we should have to update our HTML because the render function is also called. Now for a little refactoring. Let's have only our initial state set in the reducer. We do that by setting our initial state as a default argument to our reducer reducer. Go ahead and tackle it. We'll show the code below.

4. Use a default argument in the reducer to set the initial state.

Now our reducer() function should look like the following:

// let state = {count: 0}
function reducer(state = {count: 0}, action){
  switch (action.type) {
    case 'INCREASE_COUNT':
      return {count: state.count + 1}
    default:
      return state;
	}
}

We are commenting out/deleting the top line where we assign the state, because dispatching an action should take care of it (it doesn't). Call dispatch with an action like dispatch({type: 'INCREASE_COUNT'}), and we would hope that because state is undefined, our default argument will be passed through. The problem is that we still need to declare our state. So now our updated (working) code looks like the following.

let state;
function reducer(state = {count: 0}, action){
  switch (action.type) {
    case 'INCREASE_COUNT':
      return {count: state.count + 1}
    default:
      return state;
  }
}

Call dispatch({type: 'INCREASE_COUNT'}) again, and we get no error. Instead we get a beautiful piece of HTML code that says the number 1 on it. Now, if instead we want to show the number zero, our default state, well we can just refresh our page, and then dispatch an action that returns the default state like so: dispatch(type: '@@INIT'). This does not increase our state, but it does return our default state and then call render.

This is what we want to do each time we open our page. So let's add dispatch({type: '@@INIT'}) at the end of our javascript file. This is where we left off previously. Our almost completed code should look like the following.

let state;

function reducer(state = {count: 0}, action){
  switch (action.type) {
    case 'INCREASE_COUNT':
      return {count: state.count + 1}
    default:
      return state;
  }
}

function dispatch(action){
  state = reducer(state, action)
  render()
}

function render(){
  let container = document.getElementById('container');
  container.textContent = state.count;
}

dispatch({type: '@@INIT'})

Looks good. But we're going further today. We need to make sure every time the user clicks on a button, we dispatch an action. How do you think we do that.

5. Integrating dispatch with a user event

So dispatch is responsible for updating the state and re-rendering. And we want an action to be dispatched each time a user clicks. So let's attach dispatch execution to a click event.

We'll be writing a "vanilla" JavaScript event listener.

let button = document.getElementById('button');

button.addEventListener('click', function(){
	dispatch({type: 'INCREASE_COUNT'})
})

Now every time we click, we dispatch an action of type increase. Dispatch first calls our reducer, which updates our state. Then dispatch renders the updated view.

Click the button. Our application is done!

Summary

Oh yea! Not much new here. But that didn't stop the dopamine hit. We saw that by thinking about redux from the perspective of action -> reducer -> new state, we are able to get going. Then it's just a matter of tackling each problem.

As for new information, we saw that we can get the user to call the dispatch method, by executing dispatch from inside the callback of an event handler.

Lukabaramishvili/redux-dispatch-with-event-listeners-dumbo-web-career-040119