Resin 3D Printing Resources, Tips, Tricks, Files and Information
https://amzn.to/3PoqRDr ANYCUBIC Photon M3 Resin 3D Printer, 7.6" LCD SLA UV 3D Resin Printer with 4K+ Monochrome Screen, Protective Film, Fast Printing, Max Printing Size 7.08" × 6.45" × 4.03"
https://amzn.to/3PQDs28 ELEGOO Mercury Plus 2 in 1 Washing and Curing Machine for Mars 2 Mars 3 Photon S Photon Mono LCD/DLP/SLA 3D Printed Models Resin UV Curing Box with Rotary Curing Turntable (2.0)
https://amzn.to/3oq0alS Siraya Tech Build 3D Printer Resin High Resolution Non-Brittle Tappable Engineering Resin 405nm UV-Curing Standard Photopolymer Rapid Resin for LCD DLP 3D Printing (Smoky Black, 1kg)
https://amzn.to/3PxixBh ANYCUBIC Water Washable 3D Printer Resin, 405nm UV Rapid Resin for LCD 3D Printing, Low Odor, Low Viscosity and High Precision (1000 g, Grey)
Ram-Pro 50 Pack of Paint Strainers With 190 Micron Paint Filter| Fine Nylon Mesh Paint Filter Strainer - Premium Grade Paint Strainers Paper Cone - Perfect for All Painting Projects https://amzn.to/3J0viSl
For cured resin stuck on FEP- Set full screen exposure for 20 seconds and remove the sheet in one piece (from Anycubic Photon M3 Manual)
Basics https://www.youtube.com/watch?v=gb_I-9UZem0
Another Basics: https://www.youtube.com/watch?v=UU6tWhV010M
Slicers https://www.youtube.com/watch?v=VXql8JUwqsw
Fill gaps https://www.youtube.com/watch?v=R_1Fc_zint8
Water curing NEAT https://www.youtube.com/watch?v=GN_Y2qx3ksg
Smoothing fdm prints https://www.youtube.com/watch?v=lcQKHOWmG44
Tested resins characteristics from best to worst:
| Name | Notes | Temp |
|---|---|---|
| SirayaTech Build | super easy print v. strong | max 100 deg C. |
| 50% SirayaTech Build 50% SirayaTech Tanacious | easy print strong not brittle | max. 73 deg. C. |
| 50% SirayaTech Build 50% Phrozen Nylon-Green | easy print a little brittle but springy | max75 C. |
| SirayaTech Tanacious | moderate to print very soft but not springy not brittle | max 40 deg. C. |
| Phrozen Nylon-Green | Tough v. good resin moderate to print springy not brittle | max 55 deg. C. |
| SirayaTech Simple | best beginner resin super easy to print very strong brittle | max 70 deg. C. |
| Anycubic UV Tough Resin | very easy to print medium brittle | max 50 deg. C. |
| SirayaTech Sculpt | medium brittle a bit elastic easy to break ok to print | max 80 deg. C. |
| Liqcreate Premium Tough | hard to print medium brittle | max 50 deg. C. |
| Phrozen TR300 High Temp Grey | very brittle medium easy to print | max 100 deg. C. |
| Phrozen TR250 LV High Temp | very smelly very brittle hard to print | max 80 deg. C. |
| Phrozen Stiff Rock Black | slow to print brittle not really strong | max 70 deg. C. |
| Anycubic Craftsman Resin | easy to print Very Brittle | max. 70 deg. C. |
| e-Sun eResin-PLA | very unpleasant smell strong but brittle easy to print | max 60 deg. C. |
| Liqcreate Clear Impact | Very hard to print brittle | max. 53 deg. C. |
| Elegoo ABS-Like Translucent Clear | very smelly! shrinks | brittle |
| SirayaTech Blue Clear V2 | very smelly difficult to print elastic | max 45 deg. C. |
| Anycubic Standard Clear | very smelly very brittle shrinks low detail of print | max 50 deg. C. |
| Anycubic EC UV Resin Clear | brittle very easy to break. Not worth the money. |
EDF jet RC Channel Tested resins: