Macro_Watch_V2
Low cost, binary watch based off the Silicon Labs EFM8SB10F2G-A-QFN20R MCU for promotional purposes at MacroFab, INC.
This repository contains all the documentation and instructions needed to build a Macro_Watch. The Macro_Watch is designed to be mounted on an ESD wrist band. It is designed to be programmed with the Silicon Labs USB Debug Adapter and the SiLabs2TC board.
Check the MacroFab, INC. Engineering Blog for more information.
License Information
This project is under the Creative Commons Attribution-ShareAlike 4.0 International License. This project is provided with no warranty and should be used at your own risk.
Board Layout
Board Schematic
Completed Macro_Watch V2
Macro_Watch V2 being programmed
Directory listing of the repository
Directory | Description |
---|---|
Hardware | Contains all the hardware files for the Macro_Watch. Designed with Eagle V6.0+. |
Software | Has all the firmware that needs to be loaded onto the Macro_Watch. Written in C for Simplicity Studio. |
Credits
Designed by:
Parker Dillmann
Software by:
Parker Dillmann