A Python library for the Blink Camera system (Python 3.6+)
Like the library? Consider buying me a cup of coffee!
Disclaimer: Published under the MIT license - See LICENSE file for more details.
"Blink Wire-Free HS Home Monitoring & Alert Systems" is a trademark owned by Immedia Inc., see www.blinkforhome.com for more information. I am in no way affiliated with Blink, nor Immedia Inc.
Original protocol hacking by MattTW : https://github.com/MattTW/BlinkMonitorProtocol
API calls faster than 60 seconds is not recommended as it can overwhelm Blink's servers. Please use this module responsibly.
pip install blinkpy
To install the current development version, perform the following steps. Note that the following will create a blinkpy directory in your home area:
$ cd ~
$ git clone https://github.com/fronzbot/blinkpy.git
$ cd blinkpy
$ rm -rf build dist
$ python3 setup.py bdist_wheel
$ pip3 install --upgrade dist/*.whl
If you'd like to contribute to this library, please read the contributing instructions.
For more information on how to use this library, please read the docs.
This library was built with the intention of allowing easy communication with Blink camera systems, specifically to support the Blink component in homeassistant.
The simplest way to use this package from a terminal is to call Blink.start()
which will prompt for your Blink username and password and then log you in. In addition, http requests are throttled internally via use of the Blink.refresh_rate
variable, which can be set at initialization and defaults to 30 seconds.
from blinkpy.blinkpy import Blink
blink = Blink()
blink.start()
This flow will prompt you for your username and password. Once entered, if you likely will need to send a 2FA key to the blink servers (this pin is sent to your email address). When you receive this pin, enter at the prompt and the Blink library will proceed with setup.
In some cases, having an interactive command-line session is not desired. In this case, you will need to set the Blink.auth.no_prompt
value to True
. In addition, since you will not be prompted with a username and password, you must supply the login data to the blink authentication handler. This is best done by instantiating your own auth handler with a dictionary containing at least your username and password.
from blinkpy.blinkpy import Blink
from blinkpy.auth import Auth
blink = Blink()
# Can set no_prompt when initializing auth handler
auth = Auth({"username": <your username>, "password": <your password>}, no_prompt=True)
blink.auth = auth
blink.start()
Since you will not be prompted for any 2FA pin, you must call the blink.auth.send_auth_key
function. There are two required parameters: the blink
object as well as the key
you received from Blink for 2FA:
auth.send_auth_key(blink, <your key>)
blink.setup_post_verify()
Other use cases may involved loading credentials from a file. This file must be json
formatted and contain a minimum of username
and password
. A built in function in the blinkpy.helpers.util
module can aid in loading this file. Note, if no_prompt
is desired, a similar flow can be followed as above.
from blinkpy.blinkpy import Blink
from blinkpy.auth import Auth
from blinkpy.helpers.util import json_load
blink = Blink()
auth = Auth(json_load("<File Location>"))
blink.auth = auth
blink.start()
This library also allows you to save your credentials to use in future sessions. Saved information includes authentication tokens as well as unique ids which should allow for a more streamlined experience and limits the frequency of login requests. This data can be saved as follows (it can then be loaded by following the instructions above for supplying credentials from a file):
blink.save("<File location>")
Cameras are instantiated as individual BlinkCamera
classes within a BlinkSyncModule
instance. All of your sync modules are stored within the Blink.sync
dictionary and can be accessed using the name of the sync module as the key (this is the name of your sync module in the Blink App).
The below code will display cameras and their available attributes:
for name, camera in blink.cameras.items():
print(name) # Name of the camera
print(camera.attributes) # Print available attributes of camera
The most recent images and videos can be accessed as a bytes-object via internal variables. These can be updated with calls to Blink.refresh()
but will only make a request if motion has been detected or other changes have been found. This can be overridden with the force
flag, but this should be used for debugging only since it overrides the internal request throttling.
camera = blink.cameras['SOME CAMERA NAME']
blink.refresh(force=True) # force a cache update USE WITH CAUTION
camera.image_from_cache.raw # bytes-like image object (jpg)
camera.video_from_cache.raw # bytes-like video object (mp4)
The blinkpy
api also allows for saving images and videos to a file and snapping a new picture from the camera remotely:
camera = blink.cameras['SOME CAMERA NAME']
camera.snap_picture() # Take a new picture with the camera
blink.refresh() # Get new information from server
camera.image_to_file('/local/path/for/image.jpg')
camera.video_to_file('/local/path/for/video.mp4')
Methods exist to arm/disarm the sync module, as well as enable/disable motion detection for individual cameras. This is done as follows:
# Arm a sync module
blink.sync["SYNC MODULE NAME"].arm = True
# Disarm a sync module
blink.sync["SYNC MODULE NAME"].disarm = False
# Print arm status of a sync module - a system refresh should be performed first
blink.refresh()
sync = blink.sync["SYNC MODULE NAME"]
print(f"{sync.name} status: {sync.arm}")
Similar methods exist for individual cameras:
camera = blink.cameras["SOME CAMERA NAME"]
# Enable motion detection on a camera
camera.arm = True
# Disable motion detection on a camera
camera.arm = False
# Print arm status of a sync module - a system refresh should be performed first
blink.refresh()
print(f"{camera.name} status: {camera.arm}")
You can also use this library to download all videos from the server. In order to do this, you must specify a path
. You may also specifiy a how far back in time to go to retrieve videos via the since=
variable (a simple string such as "2017/09/21"
is sufficient), as well as how many pages to traverse via the stop=
variable. Note that by default, the library will search the first ten pages which is sufficient in most use cases. Additionally, you can specify one or more cameras via the camera=
property. This can be a single string indicating the name of the camera, or a list of camera names. By default, it is set to the string 'all'
to grab videos from all cameras.
Example usage, which downloads all videos recorded since July 4th, 2018 at 9:34am to the /home/blink
directory:
blink.download_videos('/home/blink', since='2018/07/04 09:34')