Completely skip official electronics_bay folder.
Print our printed parts name started with Elec
You totally need these:
2pcs Elec_Din_Clip_x2.stl
4pcs Elec_LRS_200_Mount_x4.STL
1pcs Elec_M8P_Mount.STL
We use nevermore in out kit, so you can completely skip official exhaust filter folder.
Print these parts to seal the back panel:
1pcs Exhaust_cover.stl
1pcs Exhaust_filter_grill.stl
This mod comes from Fictio's Exhaust_cover
Skip these parts:
STLs/Gantry/AB_Drive_Units/[a]_cable_cover.stl
STLs/Gantry/X_Axis/XY_Joints/[a]_endstop_pod_D2F_switch.stl
STLs/Gantry/X_Axis/XY_Joints/[a]_endstop_pod_hall_effect.stl
STLs/Gantry/X_Axis/XY_Joints/[a]_endstop_pod_hall_effect.stl
STLs/Gantry/X_Axis/XY_Joints/[a]_xy_joint_cable_bridge_2hole.stl
STLs/Gantry/X_Axis/XY_Joints/[a]_xy_joint_cable_bridge_3hole.stl
STLs/Gantry/X_Axis/X_Carriage/*
STLs/Gantry/X_Axis/Z_Joints/z_joint_upper_hall_effect.stl
Use deck_support_3mm_x8.stl and skip the 4mm one.
Skip Z_belt_Cover and use our Panel_Z_Belt Cover:
Panel_Z_belt_cover_A.stl
Panel_Z_belt_cover_B.stl
Panel_Z_belt_cover_Route_A.stl
Panel_Z_belt_cover_Route_B.stl
The route Z Belt Cover comes from tanaes's whopping_Voron_mods
Use power_inlet_IECGS_1.2mm.stl and skip other power_inlet_*
Skip this folder, we use VORON Tap as z endstop.
Print these parts and follow offical tap guide.
https://github.com/VoronDesign/Voron-Tap/tree/main/STLs
Print Tap_Upper_PCB_r2.stl and skip other Tap_Upper_*
Skip X_Carriage folder
Skip Clockwork2/cable_door.stl and print cable_door_for_pcb.stl
Skip Clockwork2/chain_*
Print these from our github:
Print Toolhead_Cable_Bridge.STL
Print Toolhead_Can_Cable_Fix.stl
Print 2pcs LED_2020_x2.stl
This mod comes from Daylight