Servo controlled goggles.
Thingiverse steampunk googles
Particle photon maker kit
Particle power shield
Rotary encoder
Song repo
These goggles are a remix of the above thingiverse link, but instead of the spring and fishing line they are controlled by independent servos. The maker kit comes with an ES08AII, a second one will be required. I used an additional RGB led and push button rotary encoder also. The AA battery pack powers the servos power shield/lipo battery power everything else.
Solder the female headers onto the prototype board. The peizo buzzer and 6 male headers (2x3) also are soldered directly on the board. A red, green, 2 RGB leds in series, the servos and a push button rotary encoder are wired from the goggles to the board using old ethernet cables and in the case of the servos, 2 sets of male to female jumpers. No resistors were used with the LED's due to the resistance in the wires.
Full wiring diagram and additional .stl model files pending.