ESP32 2048 GAME
/*
Version: V1.0
Author: Vincent
Create Date: 2020/9/9
Note:
*/
[toc]
OVERVIEW
Introduce
Implement a 2048 game on "ESP32 Touch Camera". Change from ATmega328-Flappy-Bird-Clone.
This time, a capacitive screen was used for the game experience much better.
Equipment list
- ESP32 Touch Camera
ESP32 Touch Camera
Product link ： ESP32 Touch Camera(Resistive)
Product link ： ESP32 Touch Camera(Capacitive)
The ESP32 Touch Camera use ILI9488 screen, which comes with resistive or capacitive screens. Hava an OV2640 camera and SD card slot. It can be used as a webcam, an electronic album, or a digital camera. Support for Arduino and MicroPython.
Feature
-
Integrated ESP32 2.4G WiFi and Bluetooth.
-
Micro SD card slot on board.
-
Input 5.0V Type-C USB .
-
OV2640 is a 1/4 inch CMOS UXGA (1632*1232) image sensor manufactured by OmniVision.
-
LCD 3.5 inch Amorphous-TFT-LCD (Thin Film Transistor Liquid Crystal Display) for mobile-phone or handy electrical equipments.
-
NS2009 is A 4-wire resistive touch screen control circuit with I2C interface, which contains A 12-bit resolution A/D converter.
-
The FT6X36 Series ICs are single-chip capacitive touch panel controller IC with a built-in 16 bit enhanced Micro-controller unit (MCU).
STEPS
Prepare And Burn
If you have any questions，such as how to install the development board, how to download the code, how to install the library. Please refer to :Makerfabs_FAQ
- Install board : esp32 .
- Install library : lovyanGFX library.
- Upload file "/Project_ESP32-Flappy-Bird/ILI9488_bird/ILI9488_bird.ino"
- Touch To Play！
How To Play
- Click on the first row with your finger the second and the third is up.
- Click with your finger on the fourth row and the second and third rows are down.
- Click on the first column with your finger and the second and third columns are left.
- Click on the fourth column with your finger and the second and third columns are right.
- Of course, you can also use your fingers to slide around from the middle four squares.
