/Project_ESP32-Flappy-Bird

Primary LanguageC++

ESP32 Flappy Bird

/*
Version:		V1.0
Author:			Vincent
Create Date:	2020/9/8
Note:
	
*/

main

[toc]

OVERVIEW

Introduce

Makerfabs home page

Makerfabs Wiki

Implement a Flappy Bird game on "ESP32 Touch Camera". Change from ATmega328-Flappy-Bird-Clone.

This time, a capacitive screen was used for the game experience much better.

Equipment list

  • ESP32 Touch Camera

ESP32 Touch Camera

Product link ： ESP32 Touch Camera(Resistive)

Product link ： ESP32 Touch Camera(Capacitive)

ESP32 Touch Camera

The ESP32 Touch Camera use ILI9488 screen, which comes with resistive or capacitive screens. Hava an OV2640 camera and SD card slot. It can be used as a webcam, an electronic album, or a digital camera. Support for Arduino and MicroPython.

Feature

  • Integrated ESP32 2.4G WiFi and Bluetooth.

  • Micro SD card slot on board.

  • Input 5.0V Type-C USB .

  • OV2640 is a 1/4 inch CMOS UXGA (1632*1232) image sensor manufactured by OmniVision.

  • LCD 3.5 inch Amorphous-TFT-LCD (Thin Film Transistor Liquid Crystal Display) for mobile-phone or handy electrical equipments.

  • NS2009 is A 4-wire resistive touch screen control circuit with I2C interface, which contains A 12-bit resolution A/D converter.

  • The FT6X36 Series ICs are single-chip capacitive touch panel controller IC with a built-in 16 bit enhanced Micro-controller unit (MCU).

STEPS

Prepare And Burn

If you have any questions，such as how to install the development board, how to download the code, how to install the library. Please refer to :Makerfabs_FAQ

  • Install board : esp32 .
  • Install library : lovyanGFX library.
  • Upload file "/Project_ESP32-Flappy-Bird/ILI9488_bird/ILI9488_bird.ino"
  • Touch To Play！

play