EBB36 Mounts for Dragon Burner
Mounts for the BTT EBB36 with Dragon Burner and Rapid Burner toolheads.
Compatibility
These mounts are suitable for use on V0 and Printers for Ants that include 2 mounting points at the rear of the X carriage. They do not currently work with Boop, Tap, or any other X-carriage without these.
Spacers!
Every extruder requires different length spacers, the lengths are documented here, but (for now?) no STL's for them are provided. Find your favourite one and scale it.
Printing
Use standard Voron settings, 0.2mm layers, 4 walls, 5 top, 5 bottom, 40% infill.
Remove the support bridge before installing the PCB
Install 2 M3x5x4 Heat-set inserts from the back
Extruders
The following extruders are currently supported:
Sherpa Mini
https://github.com/Annex-Engineering/Sherpa_Mini-Extruder/
- 22.35mm Spacers x2
Sharkfin
https://github.com/KayosMaker/Sharkfin_Extruder/
- 21.3mm Spacers x2
Orbiter 1.5
https://www.orbiterprojects.com/orbiter-1-5/
- 18.05mm Spacers x2
- 12mm Spacers x2
Orbiter 2
https://www.orbiterprojects.com/orbiter-v2-0/
- 18.54mm Spacers x2
Wristwatch-BMG
- 21.35mm Spacers x2
Galileo 2 Standalone (G2SA)
https://github.com/JaredC01/Galileo2/tree/main/galileo2_standalone
- 17.6mm Spacers x2
- 4mm Spacers x2
VZ-HextrudORT (CNC)
https://github.com/VzBoT3D/Vz-HextrudORT
- 22.65mm Spacers x2
LGX Lite
https://www.bondtech.se/product/lgx-lite-large-gears-extruder/
- 20.85mm Spacers x2
- 4mm Spacers x2
