A collection of extruder mounts for the Mellow FLY-SHT36 CAN bus toolhead board.
This should also be compatible with the BTT EBB36 v1.1+
- 1x FLY-SHT36_CW2.stl
- 1x Long_Spacer.stl
- 2x Spacer.stl
As an alternative to the spacers, you may use M3 nylon or brass standoffs.
If you are using FLY-UTOC-1 or FLY-UTOC-3 You should also print:
- 1x FLY-UTOC.stl
- 1x PCB_DIN_Clip.stl (If mounting to DIN Rails)
- No Supports
- 4 Perimeters
- 5 Solid top & bottom layers
- 40% Infill
- 0.2 Layer height
