Matchstick Diffuser
A diffuser for the Daylight/Rainbow on a Matchstick LEDs
BOM
Item | Qty |
---|---|
M3 Heatset Insert | 4 |
M3x6 BHCS | 4 |
Printing
- Print one of each
main_body_daylight_A.stl
andmain_body_daylight_B.stl
if you have Daylight on a Matchstick - Print one of each
main_body_rainbow_A.stl
andmain_body_rainbow_B.stl
if you have Rainbow on a matchstick - Print 2
[c]_diffuser_x2.stl
in a clear or white filament. - Print 4 of either
top_mount_clip_x4.stl
orbottom_mount_clip_x4.stl
depending on where you intend to mount the LEDs.
Assembly
- Insert heatset inserts into the clips
- Insert matchstick led strip into main body
- Using M3x6 BHCS, fasten the clips to the back of the leds
- Insert the diffuser into the main body