MarkMLl

Pinned Repositories

asound
Minimal interface for Pascal with static and dynamic linkage
Language:Pascal5 1 01
Contec_cms50dplus
A reader for the Contec CMS50D+ pulse oximeter handling live and recorded data, running as a Linux console program with configurable output format, or using a GUI.
Language:Pascal7 2 02
Dialedit3b
Archived version of Jim Clark's dialog(ue) editor v1.3 for TurboVision etc.
Language:Pascal5 1 01
hp2671
Simulation of HP2671 printer for older HP instruments using Fenrir/Prologix-subset clone adapter
Language:Pascal3 1 01
NOAA_AstroDemo
Pascal port of NOAA JavaScript ultimately derived from Jean Meeus.
Language:Pascal5 2 00
pesdump
A dump utility for PES files as used by Brother embroidery machines
Language:Pascal9 1 14
ping-arduino-loader
Detect an arduino loader attached to a serial port, trying various speeds and reset pin sense.
Language:Pascal3 1 01
scpisrv
This is a minimal SCPI server implementation, trying to hide as much complexity as possible.
Language:Pascal5 1 01
serialcomms
Units to locate serial hardware devices, plus netlink support and parsers.
Language:Pascal4 1 03
tang_nano_as_shipped
A close approximation of the demo code on Sipeed Tang Nano boards as shipped.
Language:Verilog5 2 00

MarkMLl's Repositories

MarkMLl/pesdump
A dump utility for PES files as used by Brother embroidery machines
Language:Pascal9 1 14
MarkMLl/Contec_cms50dplus
A reader for the Contec CMS50D+ pulse oximeter handling live and recorded data, running as a Linux console program with configurable output format, or using a GUI.
Language:Pascal7 2 02
MarkMLl/asound
Minimal interface for Pascal with static and dynamic linkage
Language:Pascal5 1 01
MarkMLl/Dialedit3b
Archived version of Jim Clark's dialog(ue) editor v1.3 for TurboVision etc.
Language:Pascal5 1 01
MarkMLl/NOAA_AstroDemo
Pascal port of NOAA JavaScript ultimately derived from Jean Meeus.
Language:Pascal5 2 00
MarkMLl/scpisrv
This is a minimal SCPI server implementation, trying to hide as much complexity as possible.
Language:Pascal5 1 01
MarkMLl/tang_nano_as_shipped
A close approximation of the demo code on Sipeed Tang Nano boards as shipped.
Language:Verilog5 2 00
MarkMLl/serialcomms
Units to locate serial hardware devices, plus netlink support and parsers.
Language:Pascal4 1 03
MarkMLl/hp2671
Simulation of HP2671 printer for older HP instruments using Fenrir/Prologix-subset clone adapter
Language:Pascal3 1 01
MarkMLl/ping-arduino-loader
Detect an arduino loader attached to a serial port, trying various speeds and reset pin sense.
Language:Pascal3 1 01
MarkMLl/installed-package-list
Simple scripts to monitor installed packages on Debian.
Language:Shell2 1 00
MarkMLl/Mastech_ms2115b
A reader for the Mastech 2115B digital multimeter, running as a Linux console program with configurable output format, or using a GUI. This includes minimal SCPI capabilities, allowing the current range and value to be read.
Language:Pascal2 1 01
MarkMLl/pps_gen_parport
Out-of-tree build for Linux PPS generator using parallel port strobe line
Language:C2 1 0
MarkMLl/dsocat
Interface program for a cheap DSO112 oscilloscope
Language:Pascal1
MarkMLl/i2c-ch341-usb
A Linux kernel driver for ch341 emulating the I2C bus. This fork uses kernel-generated GPIO names (to conform to the expectations of anybody who got here via a Raspberry Pi), fixes I2C visibility in /dev and has an experimental "phantom devices" fix which is normally disabled.
Language:C1 0 01
MarkMLl/shunda_tec06
Text and GUI data collection from Shunda Tec-06 battery tester.
Language:Pascal1
MarkMLl/testdb
Illustrate problems when connections are lost while DB-aware controls are active, and provide advance warning.
Language:Pascal1 1 0
MarkMLl/anet-board
This is a board definition which works in Arduino IDE 1.8.x for Anet Board targets, forked for an Anet v1.5 board in an A6 printer
Language:C0 0
MarkMLl/dmx512-tool
Naive tool demonstrating DMX512 access using a cheap device based on an FTDI clone
Language:Pascal1 01
MarkMLl/fpclaz_build_scripts
Scripts found useful when building the Free Pascal Compiler (FPC) etc.
Language:Perl
MarkMLl/FUZIX
FuzixOS: Because Small Is Beautiful (Temporary repo with support for a Cytron "Maker Pi Pico" board)
Language:C0 0
MarkMLl/paginate_pdfs
Nerd-oriented scripts to paginate a bundle of PDFs of varying provenence and type.
Language:Shell
MarkMLl/picoprobe_led
Picoprobe firmware with improved handling of both a single-colour LED and/or a WS2812.
Language:C0 0
MarkMLl/ppmtomask
Generate a mask from a .ppm file based on pixel saturation or colour.
Language:Pascal1 0
MarkMLl/Skynet3d
Skynet3d forked for an Anet v1.5 board in an A6 printer
Language:C0 0
MarkMLl/spi-ch341-usb
Linux kernel driver for CH341A USB to SPI and GPIO adapters. This fork uses kernel-generated GPIO names, to conform to the expectations of anybody who got here via a Raspberry Pi.
Language:C0 0
MarkMLl/telnetsrv
Moderately-competent Telnet server and client objects, adequate to replace the LNet implementation
Language:Pascal1 0
MarkMLl/TodayStart-A153
As-shipped demo for the Altera Cyclone TodayStart-A153 board. Requires Quartus-II 10.1 SP1 minimum.
Language:VHDL1 0
MarkMLl/TREE-META
This is initially a placeholder for a copy of the implementation at https://github.com/lugon/TREE-META
MarkMLl/utils1090
Filter utilities for dump1090-mutability output
Language:Pascal1 0