MarlinFirmware/Configurations

Build All Configurations Status - May 2024

Closed this issue · 0 comments

thisiskeithb commented

Description

Results of Marlin's build_all_examples script.

Reviewed / Unactionable

Creality/CR-6 SE

Note

Needs MarlinFirmware/Marlin#19958

Creality/Ender-5 S1

Note

Needs MarlinFirmware/Marlin#25382

Potential Fix In Process

Geeetech/A10M/YHCB2004_V4.1

Note

See MarlinFirmware/Marlin#26571 (comment) for open issue & possible fix.

details: 

/var/folders/l2/mtr_0zp945s_9s6s77z1d2fw0000gn/T//ccpC0Ipr.ltrans2.ltrans.o: In function `global destructors keyed to 65535_1_HAL.cpp.o.18264':
<artificial>:(.text.exit+0x28): undefined reference to `operator delete(void*, unsigned int)'
collect2: error: ld returned 1 exit status
*** [.pio/build/mega2560/firmware.elf] Error 1
============================================================== [FAILED] Took 25.34 seconds ==============================================================

Environment    Status    Duration
-------------  --------  ------------
mega2560       FAILED    00:00:25.335
========================================================= 1 failed, 0 succeeded in 00:00:25.335 =========================================================
Failed

Geeetech/A10PRO

Note

See MarlinFirmware/Marlin#26571 (comment) for open issue & possible fix.

details: 

/var/folders/l2/mtr_0zp945s_9s6s77z1d2fw0000gn/T//ccxzR0nA.ltrans2.ltrans.o: In function `global destructors keyed to 65535_1_HAL.cpp.o.17263':
<artificial>:(.text.exit+0x20): undefined reference to `operator delete(void*, unsigned int)'
collect2: error: ld returned 1 exit status
*** [.pio/build/mega2560/firmware.elf] Error 1
============================================================== [FAILED] Took 18.53 seconds ==============================================================

Environment    Status    Duration
-------------  --------  ------------
mega2560       FAILED    00:00:18.535
========================================================= 1 failed, 0 succeeded in 00:00:18.535 =========================================================
Failed

Geeetech/A10T/YHCB2004_V4.1

Note

See MarlinFirmware/Marlin#26571 (comment) for open issue & possible fix.

details: 

/var/folders/l2/mtr_0zp945s_9s6s77z1d2fw0000gn/T//ccwyHy4h.ltrans2.ltrans.o: In function `global destructors keyed to 65535_1_HAL.cpp.o.18316':
<artificial>:(.text.exit+0x28): undefined reference to `operator delete(void*, unsigned int)'
collect2: error: ld returned 1 exit status
*** [.pio/build/mega2560/firmware.elf] Error 1
============================================================== [FAILED] Took 21.08 seconds ==============================================================

Environment    Status    Duration
-------------  --------  ------------
mega2560       FAILED    00:00:21.085
========================================================= 1 failed, 0 succeeded in 00:00:21.085 =========================================================
Failed

Formbot/T_Rex_2+

Note

PR with fix submitted: #1056

details: 

In file included from Marlin/src/HAL/AVR/../../inc/MarlinConfigPre.h:56:0,
                 from Marlin/src/HAL/AVR/../../inc/MarlinConfig.h:28,
                 from Marlin/src/HAL/AVR/HAL.cpp:24:
Marlin/src/HAL/AVR/../../inc/../../Configuration_adv.h:823:24: error: floating constant in preprocessor expression
   #define X2_MAX_POS   434.6      // The max position of the X2 carriage, typically also the home position
                        ^
Marlin/src/HAL/AVR/../../inc/../../Configuration_adv.h:824:23: note: in expansion of macro 'X2_MAX_POS'
   #define X2_HOME_POS X2_MAX_POS  // Default X2 home position. Set to X2_MAX_POS.
                       ^~~~~~~~~~
Marlin/src/HAL/AVR/../../inc/SanityCheck.h:1842:10: note: in expansion of macro 'X2_HOME_POS'
   #elif (X2_HOME_POS <= X1_MAX_POS) || (X2_MAX_POS < X1_MAX_POS)
          ^~~~~~~~~~~
Marlin/src/HAL/AVR/../../inc/../../Configuration_adv.h:823:24: error: floating constant in preprocessor expression
   #define X2_MAX_POS   434.6      // The max position of the X2 carriage, typically also the home position
                        ^
Marlin/src/HAL/AVR/../../inc/SanityCheck.h:1842:41: note: in expansion of macro 'X2_MAX_POS'
   #elif (X2_HOME_POS <= X1_MAX_POS) || (X2_MAX_POS < X1_MAX_POS)
                                         ^~~~~~~~~~
In file included from Marlin/src/HAL/AVR/../../inc/MarlinConfig.h:55:0,
                 from Marlin/src/HAL/AVR/HAL.cpp:24:
Marlin/src/HAL/AVR/../../inc/SanityCheck.h:1843:6: error: #error "DUAL_X_CARRIAGE will crash if X1 can meet or exceed X2 travel."
     #error "DUAL_X_CARRIAGE will crash if X1 can meet or exceed X2 travel."
      ^~~~~
In file included from Marlin/src/HAL/AVR/../../inc/MarlinConfigPre.h:56:0,
                 from Marlin/src/HAL/AVR/../../inc/MarlinConfig.h:28,
                 from Marlin/src/HAL/AVR/MarlinSerial.cpp:39:
Marlin/src/HAL/AVR/../../inc/../../Configuration_adv.h:823:24: error: floating constant in preprocessor expression
   #define X2_MAX_POS   434.6      // The max position of the X2 carriage, typically also the home position
                        ^
Marlin/src/HAL/AVR/../../inc/../../Configuration_adv.h:824:23: note: in expansion of macro 'X2_MAX_POS'
   #define X2_HOME_POS X2_MAX_POS  // Default X2 home position. Set to X2_MAX_POS.
                       ^~~~~~~~~~
Marlin/src/HAL/AVR/../../inc/SanityCheck.h:1842:10: note: in expansion of macro 'X2_HOME_POS'
   #elif (X2_HOME_POS <= X1_MAX_POS) || (X2_MAX_POS < X1_MAX_POS)
          ^~~~~~~~~~~

[snip]

*** [.pio/build/mega2560/src/src/core/utility.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/bedlevel/bedlevel.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/babystep.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/caselight.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/bltouch.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/bedlevel/ubl/ubl_motion.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/bedlevel/ubl/ubl.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/MarlinCore.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/bedlevel/ubl/ubl_G29.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/pause.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/gcode/bedlevel/G26.cpp.o] Error 1
============================================================== [FAILED] Took 7.10 seconds ==============================================================

Environment    Status    Duration
-------------  --------  ------------
mega2560       FAILED    00:00:07.096
========================================================= 1 failed, 0 succeeded in 00:00:07.096 =========================================================
Failed

Fixed

Nextion

Note

PR with fix merged: MarlinFirmware/Marlin#27071

details: 

Marlin/src/lcd/extui/nextion/nextion_extui.cpp: In function 'void ExtUI::onUserConfirmRequired(int, FSTR_P, FSTR_P)':
Marlin/src/lcd/extui/nextion/nextion_extui.cpp:64:27: error: 'cstr' was not declared in this scope
     onUserConfirmRequired(cstr);
                           ^~~~
Marlin/src/lcd/extui/nextion/nextion_extui.cpp:64:27: note: suggested alternative: 'fstr'
     onUserConfirmRequired(cstr);
                           ^~~~
                           fstr
*** [.pio/build/mega2560/src/src/lcd/extui/nextion/nextion_extui.cpp.o] Error 1
============================================================== [FAILED] Took 10.56 seconds ==============================================================

Environment    Status    Duration
-------------  --------  ------------
mega2560       FAILED    00:00:10.557
========================================================= 1 failed, 0 succeeded in 00:00:10.557 =========================================================
Failed

LulzBot/Mini2/Teensy

Note

Config removed in #1053

details: 

Error - Can't find BOARD_TEENSY35_36_SIMPLE in core/boards.h.
Failed

CNC/miniRambo

Note

PR with fix submitted: MarlinFirmware/Marlin#27069 Fixed through different means in MarlinFirmware/Marlin@08fe8a3 / MarlinFirmware/Marlin#27087

details: 

In file included from Marlin/src/gcode/feature/digipot/../../../inc/MarlinConfigPre.h:37:0,
                 from Marlin/src/gcode/feature/digipot/../../../inc/MarlinConfig.h:28,
                 from Marlin/src/gcode/feature/digipot/M907-M910.cpp:23:
Marlin/src/gcode/feature/digipot/M907-M910.cpp: In static member function 'static void GcodeSuite::M907_report(bool)':
Marlin/src/gcode/feature/digipot/M907-M910.cpp:137:13: error: 'SP_E_STR' was not declared in this scope
           , SP_E_STR,       stepper.motor_current_setting[2]  // E
             ^

[snip]

*** [.pio/build/rambo/src/src/gcode/feature/digipot/M907-M910.cpp.o] Error 1
============================================================== [FAILED] Took 7.55 seconds ==============================================================

Environment    Status    Duration
-------------  --------  ------------
rambo          FAILED    00:00:07.551
========================================================= 1 failed, 0 succeeded in 00:00:07.551 =========================================================
Failed

Formbot/T_Rex_3

Note

PR with fix merged: #1057

details: 

In file included from Marlin/src/HAL/AVR/../../inc/MarlinConfigPre.h:56:0,
                 from Marlin/src/HAL/AVR/../../inc/MarlinConfig.h:28,
                 from Marlin/src/HAL/AVR/HAL.cpp:24:
Marlin/src/HAL/AVR/../../inc/../../Configuration_adv.h:827:27: error: floating constant in preprocessor expression
   #define X2_MAX_POS (442-4.0)    // The max position of the X2 carriage, typically also the home position
                           ^
Marlin/src/HAL/AVR/../../inc/../../Configuration_adv.h:828:23: note: in expansion of macro 'X2_MAX_POS'
   #define X2_HOME_POS X2_MAX_POS  // Default X2 home position. Set to X2_MAX_POS.
                       ^~~~~~~~~~
Marlin/src/HAL/AVR/../../inc/SanityCheck.h:1842:10: note: in expansion of macro 'X2_HOME_POS'
   #elif (X2_HOME_POS <= X1_MAX_POS) || (X2_MAX_POS < X1_MAX_POS)
          ^~~~~~~~~~~
Marlin/src/HAL/AVR/../../inc/../../Configuration_adv.h:827:27: error: floating constant in preprocessor expression
   #define X2_MAX_POS (442-4.0)    // The max position of the X2 carriage, typically also the home position
                           ^
Marlin/src/HAL/AVR/../../inc/SanityCheck.h:1842:41: note: in expansion of macro 'X2_MAX_POS'
   #elif (X2_HOME_POS <= X1_MAX_POS) || (X2_MAX_POS < X1_MAX_POS)
                                         ^~~~~~~~~~
In file included from Marlin/src/HAL/AVR/../../inc/MarlinConfigPre.h:56:0,
                 from Marlin/src/HAL/AVR/../../inc/MarlinConfig.h:28,
                 from Marlin/src/HAL/AVR/HAL_SPI.cpp:34:
Marlin/src/HAL/AVR/../../inc/../../Configuration_adv.h:827:27: error: floating constant in preprocessor expression
   #define X2_MAX_POS (442-4.0)    // The max position of the X2 carriage, typically also the home position
                           ^
Marlin/src/HAL/AVR/../../inc/../../Configuration_adv.h:828:23: note: in expansion of macro 'X2_MAX_POS'
   #define X2_HOME_POS X2_MAX_POS  // Default X2 home position. Set to X2_MAX_POS.
                       ^~~~~~~~~~
Marlin/src/HAL/AVR/../../inc/SanityCheck.h:1842:10: note: in expansion of macro 'X2_HOME_POS'
   #elif (X2_HOME_POS <= X1_MAX_POS) || (X2_MAX_POS < X1_MAX_POS)

[snip]

*** [.pio/build/mega2560/src/src/core/utility.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/bedlevel/bedlevel.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/babystep.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/bltouch.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/caselight.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/bedlevel/ubl/ubl_motion.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/bedlevel/ubl/ubl.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/runout.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/MarlinCore.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/bedlevel/ubl/ubl_G29.cpp.o] Error 1
*** [.pio/build/mega2560/src/src/feature/pause.cpp.o] Error 1
============================================================== [FAILED] Took 6.94 seconds ==============================================================

Environment    Status    Duration
-------------  --------  ------------
mega2560       FAILED    00:00:06.939
========================================================= 1 failed, 0 succeeded in 00:00:06.939 =========================================================
Failed