Pinned issues
[FR] Configurations for all 3D printers and every possible permutation
#649 opened by thinkyhead
Open183
Issues
- 0
Build All Configurations Status - June 2024
#1068 opened by thisiskeithb - 0
[FR] Standardize on how to enable optional bltouch
#959 opened by ellensp - 1
- 1
[BUG] Weedo Tina2 config not compiling version 2.1.2.4 PREHEAT_2_TEMP_HOTEND
#1072 opened by kaiomatico - 0
Build All Configurations Status - May 2024
#1052 opened by thisiskeithb - 4
[BUG] release 2.1.2.4 Configs are quite broken
#1065 opened by ellensp - 1
Temperature is showing without any thermistor.
#1067 opened by Champ7120 - 3
[BUG] Need #define BABYSTEP_Z
#1062 opened by JJones780 - 2
- 6
Compile error SDSUPPORT Artillery Ruby
#1059 opened by pmanzionna - 0
- 4
Can you make a version for the: Creality Ender 3 V2 Neo - BTT SKR Mini E3 V3, But with the stock 4.3" Ender 3 V2 Neo LCD Screen?
#1051 opened by BIG-BRO-L - 2
[BUG] (short description) need a configuration for 2.1.x bug fix for anycubic chiron with BTT SKR3EZ and BTT TFT35
#1041 opened by slingshott1 - 2
[BUG] Longer LK5 disable ENDSTOP_INTERRUPTS_FEATURE
#1033 opened by ellensp - 1
Configuration is missing[BUG] (short description)
#1030 opened by steverc1572 - 1
- 2
marlin will not acknowledge the robin nano v3.1
#1027 opened by adowg67 - 1
- 2
[BUG] Marlin 2.1.2.2 Experimental_Scurve compilation errors with SKR mini E3 v2.0 for Ender 3 config files
#1016 opened by altadeos - 3
skr mini v3 Define DIAG_JUMPERS_REMOVED 2.1.2 stable
#1015 opened by akash1769 - 3
- 1
[BUG] Manual Probing Causes Bed to Continuously Rise and Crash into Nozzle on Ender 5 Plus without BL Touch
#1002 opened by itsmaxjeffrey - 2
- 2
Temperature not stabilizing on Anycubic Predator
#996 opened by GruenSein - 2
BIBO extruder PID parameters that work (for my printer)
#1000 opened by psehorne - 2
CTC Bizer Marlin Not Compiling Arduino
#999 opened by MechEng2016 - 2
fysect e4 esp32 TMC2209 UART driver error
#991 opened by yoroboticscolombia - 1
Ender 3 S1 Pro ,LED bar not powered
#983 opened by VAGNERT70 - 6
[BUG] JGAURORA MAGIC unloads filament at print start
#979 opened by nvdias0 - 2
[BUG] JGAURORA MAGIC - Encoder is inverted
#978 opened by nvdias0 - 1
[BUG] (ENCODER not work)
#976 opened by APToni - 2
[BUG] Ender 5 plus with Dwin Set not working
#971 opened by leseaw - 10
Creality Ender 5 Plus with 4.2.2 board and ATMEGA2560 chip requires firmware.hex firmware
#975 opened - 1
External drivers in marlin firmware 2.1.2.1
#974 opened by johnstephansen - 15
[BUG] Ender5 plus with new Dwin Set
#970 opened by leseaw - 3
- 0
- 6
[BUG] Creality CR10s v1: Marlin\src\module\temperature.cpp:330:38: error: static assertion failed: PREHEAT_2_TEMP_HOTEND (250) must be less than HEATER_0_MAXTEMP (250) - 15.
#952 opened by isidorosss - 1
Creality CR10s v1 has a microSD card extender. #define NO_SD_DETECT must be enabled by default.
#953 opened by isidorosss - 3
White screen after boot elegoo neptune 2
#951 opened by franmuzi1 - 2
- 2
[BUG] Ender 5 w/ BL Touch - HOMING FAILED, PRINTER HALTED, Please reset - bugfix-2.1.x only
#947 opened by NocTuro974 - 1
z z2 endstop reversed
#930 opened by microsoul - 1
- 1
[BUG] Ultimaker 2 - Encoder Steps wrong
#918 opened by kallisti5 - 1
[BUG] Ultimaker 2 bugs
#917 opened by kallisti5 - 2
- 2
In JG Aurora A1 and A5S advanced configs, FAN_ACTIVE_STATE LOW should be FAN_INVERTING 1
#908 opened by CFTBL - 2
- 1
Just tested the latest bugfix-2.1.x. Compiles with no errors and runs on my Lerdge K.
#903 opened by Max-is-awsome