MarsTechHAN/ch552tool
An open sourced python tool for flashing WCH CH55x series USB microcontroller with bootloader v2.30, v2.31 & v2.40.
PythonGPL-3.0
Issues
- 0
Add ch582 debug enabling feature
#35 opened by fra888 - 0
Added support (works for me, no warranties) for CH32V203C8T6 nanoch32v203
#34 opened by edwin-oetelaar - 1
usb.core.USBError: [Errno 32] Pipe error
#33 opened by fabiodl - 0
Starting the code with -r switch
#32 opened by Edocecrous - 0
- 1
CH32V203C8T6 working
#30 opened by arsonoff - 1
In pypi-package there are not enough files.
#29 opened by arsonoff - 10
Missing chip data file after pipy installation
#25 opened by kossnikita - 9
Failed to get device for CH559
#16 opened by maxgerhardt - 4
- 1
This work for CH583?
#27 opened by sabas1080 - 3
README does not mention CH56x also work now
#24 opened by hansfbaier - 0
Put CH569 in debug mode
#23 opened by hansfbaier - 4
Tried with CH568L , unsuccess. But solution found :) will place PR in near weeks.
#20 opened by Pe3ucTop - 2
- 3
Failed to flash firmware of CH55x
#15 opened by Kashouryo - 8
Fails to verify once the size is big
#17 opened by fabiodl - 3
Cannot use Zadig with Maix Bit due to "[Port2] FailedEnumeration: Unknown USB Device (Device Descriptor Request Failed)"
#19 opened by etheory - 1
no debug mode
#14 opened by nerdralph - 3
USB_ERROR_CANNOT_SET_CONFIG error on CH552
#13 opened by suda-morris - 2
Document how to put the chip in DFU mode
#8 opened by zoobab - 2
add shebang
#7 opened by nerdralph - 1
- 1
Support for bootloader 2.40?
#10 opened by myst729 - 3
Support Mac OS
#6 opened by sabas1080 - 4
CH554 programming error ...
#2 opened by RandoSY - 1
Failed to flash firmware of CH55x.
#4 opened by myst729 - 0