Multifunctional DIY IoT-based general aviation proximity awareness system.
Features:
- 2-way raw data bridge between 868/915 MHz radio band and Wi-Fi ;
- standalone, battery powered, compatible proximity awareness instrument that fits typical 2.25 inches hole ;
- lightweight version to carry onboard of an UAV.
Type | Protocol | FLARM | OGN tracker | PilotAware | Skytraxx | SoftRF |
---|---|---|---|---|---|---|
Radio | FLARM AIR V6 | |||||
OGNTP |
||||||
P3I |
||||||
UAT 978 |
||||||
FANET+ |
||||||
Data | FLARM NMEA | |||||
Garmin GDL90 | ||||||
MAVLINK |
||||||
Dump1090 5 |
1 - it is necessary for a reader to distinguish the difference between statement "compatible" and statement "fully compatible".
SoftRF implements only a reasonable minimum of the protocols specs. No "bells and whistles" so far.
2 - FANET+ can not receive FLARM. However it is able to transmit it.
3 - valid for Prime Mark II , Dongle and Uni Editions; valid for Standalone and UAV Editions with optional DIY SoftRF LoRa RF module
4 - Reception of traffic 'downlink' frames only. Valid for Uni Edition alone and for Standalone Edition with optional DIY SoftRF UAT module
5 - also known as "raw ADS-B"
Model(s) | Platform | First appearance | Status | Notes |
---|---|---|---|---|
1 Prime 2 Standalone 3 UAV 4 WebTop |
Espressif ESP8266 |
Q4 2015 | Prime model is no longer supported - use Prime MkII instead. |
|
1 Prime Mark II 2 Standalone + adapter 3 UAV 4 SkyView EZ 5 Flight Recorder |
Espressif ESP32 |
Q1 2018 | Today's best platform | |
1 Raspberry Edition 2 SkyView Pi |
Broadcom BCM283X (Raspberry Pi) |
Q4 2018 | Good for use together with RTL-SDR dongles to achieve additional 1090ES (and 978UAT) ADS-B air traffic reception. | |
1 UAT module 2 Uni |
Texas Instruments CC1310 and CC1352R |
Q1 2019 | 1 Unique RF radio specs are useful for UAT reception [ 1 , 2 , 3 ] ; 2 holds FCC/CE mark |
|
1 Dongle 2 Retro |
STMicroelectronics STM32 |
Q3 2019 | AcSiP S76G "3-in-1" system-in-package is doing good [ 1 , 2 , 3 ] . As well as STM32F103C8 "Blue Pill" (same MCU that STM32 OGN tracker uses) [ 4 , 5 ] . |
|
Mini | Cypress PSoC 4100S |
Q3 2020 | 1 good add-on candidate for modded Kobo e-Readers ; 2 holds FCC/CE mark |
|
Badge | Nordic Semiconductor nRF52840 |
Q4 2020 |
Radio | Model(s) | First appearance | Status | Notes |
---|---|---|---|---|
Nordic Semiconductor nRF905 |
1 Prime 2 Standalone 3 UAV |
Q4 2015 | ||
Semtech SX1276 |
1 LoRa module 2 Prime Mark II 3 Raspberry Edition 4 Dongle |
Q4 2017 | ||
Texas Instruments CC1310 |
UAT module | Q1 2019 | ||
Semtech SX1231 |
Retro | Q3 2019 | operates through OGN driver with OGNTP protocol only | |
Semtech SX1262 |
1 Prime Mark II 2 Mini 3 Badge |
Q1 2020 | ||
Texas Instruments CC1352R |
Uni Edition | Q2 2020 |
GNSS | Model(s) | First appearance | Status | Notes |
---|---|---|---|---|
Generic NMEA |
Standalone | Q4 2016 | ||
U-blox 6/7/8 |
1 Prime Mark II 2 Retro 3 Uni Edition |
Q2 2018 | ||
Hangzhou ZhongKe AT6558 |
Prime Mark II | Q2 2019 | ||
Sony CXD5603GF |
Dongle | Q4 2019 | ||
MediaTek MT3339 |
1 Raspberry 2 Uni |
Q3 2020 | ||
GOKE GK9501 |
1 Mini 2 Badge |
Q3 2020 |
-
SoftRF overview
-
- Quick start
- Enclosure
- Firmware update
-
SkyView
-
Software
- Firmware
- Release information
- Binary
- Settings
- Update (Web method)
- Source
- Firmware
-
Extras
-
Archive
- Prime Edition
- Applications