Additions to Z-axis Kits

[mrfugu]

Hey,

In running down the best solutions for reducing 'slop' in the Z-axis on the default system I think we have a list of materials well suited as additions to the Z-axis kit:

These are all low cost parts and readily available in quantity.

see: https://forums.maslowcnc.com/t/z-axis-only-moving-the-router-some-of-the-time/133/16

https://www.mcmaster.com/#91545a330
1-3x washers, used to remove slop from the bottom of the router screw in conjunction with retaining ring.

https://www.mcmaster.com/#98398a120
1-2x retaining ring, to replace/spares factory retaining ring, is possible to damage while placing washers.

https://www.mcmaster.com/#76445a743
12-18"x low friction tape. 3x router spindle body length. evenly spaced around router circumference

https://www.mcmaster.com/#12205t55
6x rubber bands. Works in conjunction with split-ring to apply down pressure on router in sleeve, between split ring and handle bolts.

https://www.mcmaster.com/#90905a659
1x split ring. sits on top of router head to hold rubber bands in place above router.

https://www.lowes.com/pd/Hillman-1-2-in-x-3-8-in-x-5-8-in-Nylon-Spacers/3012447
2x nylon spacers super glued on either side of router height adjustment flange. provides torsion stability to router part assembly:

(640963002) Depth Interlock Lever
(671758001) Depth Compression Spring
(513396001) Depth Interlocking Lever Tab