MaslowCNC/Mechanics

Issues

• Chain pull on setup.

  #103 opened 3 years ago by alaskanalain
  5

• Initial plunge off path

  #102 opened 4 years ago by DJscreen
  3

• Bent Bolt

  #101 opened 4 years ago by gamermom001
  3

• Motor runs every time in same direction

  #100 opened 4 years ago by mmmmmmmmmmmmmmm2
  31

• Different hardware than assembly guide/ videos

  #98 opened 6 years ago by Swedorican-Design
  6

• Broken link or missing info

  #97 opened 6 years ago by Shady-Grove
  6

• Reduce friction between sled and cutting surface

  #20 opened 6 years ago by BarbourSmith
  51

• Flexible frame Concept

  #96 opened 6 years ago by CMHinckley
  6

• Additions to Z-axis Kits

  #95 opened 6 years ago by mrfugu
  0

• SketchUp Motor bracket files not opening in SketchUp

  #87 opened 6 years ago by seem-less
  1

• Broken link in wiki ("Z-Axis" page)

  #88 opened 6 years ago by abetusk
  2

• Wiki page claims 0.25in router bit but links to 0.1875in router bit.

  #86 opened 6 years ago by abetusk
  7

• Frame flex

  #85 opened 7 years ago by BarbourSmith
  16

• Why does the shop have a picture of z-axis mounted sideways on a motor mounting plate?

  #84 opened 7 years ago by GeroBH
  1

• Avoiding tearing down the temporary frame

  #79 opened 7 years ago by skiz
  2

• Chain link height

  #51 opened 7 years ago by ronbutterfield
  3

• Correct github/linguist issue

  #80 opened 7 years ago by blurfl
  0

• Source for Motor mounts

  #78 opened 7 years ago by JDogHerman
  1

• Unclear router description and features

  #31 opened 7 years ago by jbarchuk
  6

• Front Arms point needs rounding

  #32 opened 7 years ago by mnelson78
  9

• All parts SVG missing parts

  #62 opened 7 years ago by ladyhawke13
  5

• Detailed specs for motors and encoders

  #52 opened 7 years ago by rodrigogoncalves
  3

• Make cutouts for bit in arms larger

  #50 opened 7 years ago by BarbourSmith
  1

• Design braces to be shapes which can't be reversed

  #49 opened 7 years ago by BarbourSmith
  2

• Make motor placement more defined

  #6 opened 7 years ago by BarbourSmith
  2

• Motor/Gearbox/Encoder - Specific Requirements

  #1 opened 7 years ago by iceblu3710
  2

• All_Parts_Laid_Out.svg AngleBrace1 error

  #53 opened 7 years ago by mrfugu
  10

• Z-Axis Help

  #47 opened 7 years ago by Seventhram
  1

• 'Using the Temporary Frame to Cut Parts' has two Section 9's and no Section 10

  #37 opened 7 years ago by blurfl
  2

• NOT an issue, just need to host image file of alternative frame design

  #30 opened 7 years ago by aluminumwelder
  4

• Mechanics Sketchup files cannot be opened

  #29 opened 7 years ago by jonasdagefoerde
  3

• Building temp frame step 10

  #24 opened 7 years ago by sanenerd
  2

• Missing SVG file for brick holding bracket on sled

  #11 opened 7 years ago by mnelson78
  1

• Motor_Mount.svg file seems wrong.

  #7 opened 7 years ago by blurfl
  10

• Add .dae file for non-Sketchup viewing

  #3 opened 7 years ago by blurfl
  1