MatterHackers/MatterSlice
MatterSlice is a C# console application that generates GCode (hardware control) for 3D printing. It was originally ported from CuraEngine (another great open source 3D printing engine). It is the primary slicing engine for MatterSlice and under constant development.
C#
Issues
- 1
- 3
- 3
MatterSlice settings "RaftSurfaceLayers" and "RaftSurfacePrintSpeed" are not able to be read into configuration
#618 opened by scherej958 - 3
MatterSlice generates an Exception if ModelMatrix is read in the configuration file
#619 opened by scherej958 - 0
Matterslice do not generate support
#569 opened by zmwd110 - 1
Start/stop of inner perimeter loops is causing artifacts on the outside
#344 opened by unlimitedbacon - 0
Easy bug fix for Linux users. MatterControl v2.0 screen looks blank after successful installation.
#540 opened by RocketCityDynamics - 1
-d settings.ini throws exception
#535 opened by MrnB - 4
Bridge identification
#231 opened by doomsed - 0
Make printer switch to outer perimeter speed early to ensure good chamber pressure
#349 opened by larsbrubaker - 1
- 3
Request: Cylindrical wipe tower option
#295 opened by teejaydub - 1
If there are priming loops, first layer of wipe tower should be printed as solid rather than normal priming
#390 opened by larsbrubaker - 0
Slicing failure due to pound in source filename
#424 opened by jlewin - 0
- 0
- 0
Artifact on Horizontal Surface Test
#328 opened by jlewin - 1
Support overlaps thin walls
#334 opened by unlimitedbacon - 1
"Support Everywhere" is not honored correctly
#420 opened by unlimitedbacon - 1
broken solution
#418 opened by matendie - 0
Brim does not fill gaps between objects
#407 opened by unlimitedbacon - 0
Brim in dual extrusion not touching part when only printing with first extruder
#389 opened by larsbrubaker - 1
Gcode potentially harmful to equipment
#400 opened by martinpirringer - 3
Fractured Gcode file please help
#398 opened by martinpirringer - 4
Mattercontro; can be started multiple times
#399 opened by martinpirringer - 2
Inside Brim
#401 opened by martinpirringer - 3
- 0
- 0
Feature request "adaptive layers"
#394 opened by martinpirringer - 0
Feature request Temp Tower
#393 opened by martinpirringer - 1
Odd time estimate display
#395 opened by martinpirringer - 1
- 0
Wipe shield is double printed
#381 opened by unlimitedbacon - 1
- 1
Wipe tower is skipped on the top layer
#296 opened by teejaydub - 1
- 0
High Volume: Try printing lowest solid top infill layer with bridging settings
#331 opened by unlimitedbacon - 0
Fan is turned on/off one layer late
#337 opened by unlimitedbacon - 0
- 1
Does not succeed at avoid crossing perimeters
#275 opened by larsbrubaker - 0
Divided support line
#333 opened by unlimitedbacon - 0
Extra travels in Vertical Surface Test
#330 opened by unlimitedbacon - 0
- 1
- 0
Tesselation and Arcs
#259 opened by duisenberg - 1
Missing references "VectorMath" and "Agg"
#255 opened by walterX12 - 0
- 1
Compilation prerequsities
#250 opened by walterX12 - 0
- 2