Shutter card

Note : Be careful, since version 2021.11.0 of Home Assistant, there is a breaking change in the icon buttons. So install v1.3.0 of this card only if you have at least the version 2021.11.0 of Home Assistant

This card allows to open, close or set a shutter to the opening rate you want.

Configuration

General

Name	Type	Required	Default	Description
type	string	True	-	Must be "custom:shutter-card"
title	string	False	-	Title of the card

Entities

Name	Type	Required	Default	Description
entity	string	True	-	The shutter entity ID
name	string	False	Friendly name of the entity	Name to display for the shutter
buttons_position	string	False	`left`	Set buttons on `left` or on `right` of the shutter
title_position	string	False	`top`	Set title on `top` or on `bottom` of the shutter
invert_percentage	boolean	False	`false`	Set it to `true` if your shutter is 100% when it is closed, and 0% when it is opened
offset	integer	False	0	See Offset configuration

Remark : you can also just give the entity ID (without to specify entity:) if you don't need to specify the other configurations.

Offset configuration

Some shutter won't run relative to the cards shutter (e.g. the german Rolladen) and need some offset. Easiest way is to close the shutter to the desired 0% open position and take the shown value (e.g. 15) as offset configuration.

Remark : Setting the shutter to real 0% is only possible by pressing the down button then.

Sample

type: 'custom:shutter-card'
title: My shutters
entities:
  - entity: cover.left_living_shutter
    name: Left shutter
    buttons_position: left
    title_position: bottom
  - cover.bedroom_shutter

Install

If you use HACS, the resources will automatically be configured with the needed file.

If you don't use HACS, you can download js file from latest releases. Drop it then in www folder in your config directory. Next add the following entry in lovelace configuration:

resources:
  - url: /local/hass-shutter-card.js
    type: module