An Embedded System project created with the objective to monitor air pollution using CO (Carbon Monoxide) and Sn02 (Tin Dioxide) sensors. When the percentage level of these gases (either or both) crosses a certain threshold level, the sensors detect the change and send appropriate signals to micro controller, which interprets these signals and displays an appropriate message on the LCD screen. The corresponding LED for the gas sensor is lit up and a buzzer beeps, to indicate that there is an increased level of pollution in the surrounding environment.
As the amount of pollution has tremendously increased in the past few years, measures must be taken to control and monitor the amount of toxic gases emitted by industries as these gases adversely affect the environment and the livelihood of wildlife and human beings. As Sn02 and CO are the most toxic of gases released by industries, this detector can be used to monitor the level of these gases emitted in exhaust pipes in most industries.
- Sn02 (Tin Dioxide) Gas Sensor
- CO (Carbon Monoxide) Gas Sensor
- 8051 Microcontoller Circuit Board
- 8051 Microcontoller : AT89C51 (by Atmel)
- 16 * 2 LCD Displays
- Buzzer
- Two LEDs
- Good sensitivity to the harmful gases.
- Long life and low cost.
- Simple drive circuit.
- Kiel uVision4 : For writing and compiling code.
- Flash Magic: To burn the hex file into the micro controller.