- Easy to build. Great for soldering practice.
- Supports all cyrillic symbols in base layer.
- Compatible with most base-kit keycap sets. No 40s addons needed.
- Optional EC-11 encoder
- Plate also optional. You can build keyboard without a plate to reduce cost.
- Variable bottom-row with a 3u spacebars support.
- Customizable panels
- VIAL/QMK
- Hole for USB port should be bigger to prevent any interference
- Hard to pull out a pcb-sandwich after installing panel
6-degree caseDone, untested- Split-case for printing on smaller printers
- Create a build guide
BOM (and iBOM in soroka-pcb/bom/ibom.html)
| Part | Quantity | Link |
|---|---|---|
| Soroka PCB | 1 | - |
| Soroka Plate (Optional) | 1 | - |
| Soroka Case | 1 | - |
| Soroka Panel | 1 | - |
| RP2040-Zero | 1 | Aliexpress |
| 1N4148 SOD-123 Diode T4 1206 | 50 | Aliexpress |
| EC-11 Encoder 12.5mm (optional) | 1 | Aliexpress |
| Round silicon feets 8x8x0.5 | 4 | - |
| M2 x 4mm Screws | 15 | Aliexpress |
| M2 Inserts 3mm (OD3.2) | 7 | Aliexpress |
| Female-Female Standoffs 10mm | 4 | Aliexpress |