MicrochipTech/cryptoauthtools

Issues

• Lack of int_from_bytes' from 'cryptography.utils'.

  #38 opened 2 years ago by nerodu
  0

• Error of sign_verify.py

  #37 opened 2 years ago by nerodu
  1

• Can't run info.py

  #13 opened 3 years ago by seungwhanrhee
  9

• NameError: name 'setup_example_runner' is not defined

  #34 opened 2 years ago by cibolo
  5

• Unsupported Interface Error : ValueError: /lib/libcryptoauth.so: undefined symbol: cfg_ateccx08a_kithid_default

  #33 opened 2 years ago by lucy-sha512
  1

• Add support for ATECC608B

  #32 opened 2 years ago by Aconitin
  0

• config.py throwing exception when using an ATECC680A

  #31 opened 3 years ago by dexterac
  16

• How to build a certificate definition for different certificate types

  #8 opened 3 years ago by matriedel
  1

• Make config in the examples more readable

  #12 opened 3 years ago by pfried
  3

• Invalid ATCACERT_DEF_CSR_SUBJECT_LENGTH value for custom extensions

  #15 opened 3 years ago by balaji-reddy
  1

• Problems in using CryptoAuthentication SOIC XPRO Starter Kit

  #16 opened 3 years ago by Vally-cloud
  4

• ValueError: Unsupported device ATECC608

  #30 opened 3 years ago by matsujirushi
  0

• Typo at line 201: config = Atecc608Config.from_buffer(config_data)

  #28 opened 3 years ago by gpmanly
  1

• Would you please add some release tags?

  #18 opened 4 years ago by ambarus
  1

• Config.py throwing exception when using an ATECC608A module

  #24 opened 4 years ago by massi-ang
  0

• `config.py` throwing exception when using an ATECC680A

  #25 opened 4 years ago by massi-ang
  0

• cryptoauthlib==20200912 is broken

  #23 opened 4 years ago by RobertDeRose
  1

• Unable to communicate with ATECC608A-TFLXTLS on Linux

  #21 opened 4 years ago by DuyTrandeLion
  1

• Cryptoauthlib unable to import in yocto linux.

  #22 opened 4 years ago by hsnhrn
  1

• ATSHA204A on Raspberry Pi I2C walkthrough.

  #19 opened 4 years ago by krish2487
  4

• Similar software written in C

  #17 opened 5 years ago by evgeny-boger
  0

• Soft reset to make I2C address effective

  #11 opened 5 years ago by matriedel
  3

• How to do a CSR / Signing / apply Certificate Flow?

  #10 opened 5 years ago by pfried
  7

• After device is provisioned communication gets unreliable

  #9 opened 5 years ago by matriedel
  3

• info.py AssertionError

  #6 opened 6 years ago by matriedel
  5

• config.py does not really call atcab_genkey for four different slots, but instead calls it for slot 0 four times

  #5 opened 6 years ago by johnp789
  1

• Option for I2C bus select

  #3 opened 6 years ago by explora26
  0

• provisioning_utility folder missing

  #2 opened 6 years ago by paclema
  1

• config.py missing for ecdh.py example

  #1 opened 6 years ago by paclema
  1