Elasticsearch (5.4.0) cluster on top of Kubernetes made easy.
- Important Notes
- Pre-Requisites
- Build-Images(optional)
- Test (deploying & accessing)
- Deploying with Helm
- Install plug-ins
- Clean up with Curator
- FAQ
- Troubleshooting
Elasticsearch best-practices recommend to separate nodes in three roles:
Masternodes - intended for clustering management only, no data, no HTTP APIClientnodes - intended for client usage, no data, with HTTP APIDatanodes - intended for storing and indexing data, no HTTP API
Given this, I'm going to demonstrate how to provision a (near, as storage is still an issue) production grade scenario consisting of 3 master, 2 client and 2 data nodes.
-
Elasticsearch pods need for an init-container to run in privileged mode, so it can set some VM options. For that to happen, the
kubeletshould be running with args--allow-privileged, otherwise the init-container will fail to run. -
By default,
ES_JAVA_OPTSis set to-Xms256m -Xmx256m. This is a very low value but many users, i.e.minikubeusers, were having issues with pods getting killed because hosts were out of memory. One can change this in the deployment descriptors available in this repository. -
As of the moment, Kubernetes pod descriptors use an
emptyDirfor storing data in each data node container. This is meant to be for the sake of simplicity and should be adapted according to one's storage needs. -
The stateful directory contains an example which deploys the data pods as a
StatefulSet. These use avolumeClaimTemplatesto provision persistent storage for each pod.
- Kubernetes cluster with alpha features enabled (tested with v1.5.2 on top of Vagrant + CoreOS)
kubectlconfigured to access the cluster master API Server
Providing one's own version of the images automatically built from this repository will not be supported. This is an optional step. One has been warned.
kubectl create -f es-discovery-svc.yaml
kubectl create -f es-svc.yaml
kubectl create -f es-master.yaml
Wait until es-master deployment is provisioned, and
kubectl create -f es-client.yaml
kubectl create -f es-data.yaml
Wait for containers to be in the Running state and check one of the Elasticsearch master nodes logs:
$ kubectl get svc,deployment,pods
NAME CLUSTER-IP EXTERNAL-IP PORT(S) AGE
svc/elasticsearch 10.100.75.158 <pending> 9200:31163/TCP 3m
svc/elasticsearch-discovery 10.100.182.93 <none> 9300/TCP 3m
svc/kubernetes 10.100.0.1 <none> 443/TCP 1h
NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE
deploy/es-client 2 2 2 2 32s
deploy/es-data 2 2 2 2 32s
deploy/es-master 3 3 3 3 3m
NAME READY STATUS RESTARTS AGE
po/es-client-3170561982-djb1f 1/1 Running 0 32s
po/es-client-3170561982-mwfhs 1/1 Running 0 32s
po/es-data-1526844084-4mfg3 1/1 Running 0 31s
po/es-data-1526844084-8njx2 1/1 Running 0 31s
po/es-master-2212299741-0x880 1/1 Running 0 3m
po/es-master-2212299741-1j9lm 1/1 Running 0 3m
po/es-master-2212299741-p1jrt 1/1 Running 0 3m
$ kubectl logs po/es-master-2212299741-0x880
[2017-05-10T08:57:49,686][INFO ][o.e.n.Node ] [es-master-2212299741-0x880] initializing ...
[2017-05-10T08:57:49,793][INFO ][o.e.e.NodeEnvironment ] [es-master-2212299741-0x880] using [1] data paths, mounts [[/data (/dev/sda9)]], net usable_space [13.6gb], net total_space [15.5gb], spins? [possibly], types [ext4]
[2017-05-10T08:57:49,794][INFO ][o.e.e.NodeEnvironment ] [es-master-2212299741-0x880] heap size [247.5mb], compressed ordinary object pointers [true]
[2017-05-10T08:57:49,797][INFO ][o.e.n.Node ] [es-master-2212299741-0x880] node name [es-master-2212299741-0x880], node ID [NQTFaK_vRO6YixjB3_8cLQ]
[2017-05-10T08:57:49,799][INFO ][o.e.n.Node ] [es-master-2212299741-0x880] version[5.4.0], pid[12], build[780f8c4/2017-04-28T17:43:27.229Z], OS[Linux/4.10.12-coreos/amd64], JVM[Oracle Corporation/OpenJDK 64-Bit Server VM/1.8.0_121/25.121-b13]
[2017-05-10T08:57:51,365][INFO ][o.e.p.PluginsService ] [es-master-2212299741-0x880] loaded module [aggs-matrix-stats]
[2017-05-10T08:57:51,365][INFO ][o.e.p.PluginsService ] [es-master-2212299741-0x880] loaded module [ingest-common]
[2017-05-10T08:57:51,366][INFO ][o.e.p.PluginsService ] [es-master-2212299741-0x880] loaded module [lang-expression]
[2017-05-10T08:57:51,366][INFO ][o.e.p.PluginsService ] [es-master-2212299741-0x880] loaded module [lang-groovy]
[2017-05-10T08:57:51,366][INFO ][o.e.p.PluginsService ] [es-master-2212299741-0x880] loaded module [lang-mustache]
[2017-05-10T08:57:51,366][INFO ][o.e.p.PluginsService ] [es-master-2212299741-0x880] loaded module [lang-painless]
[2017-05-10T08:57:51,366][INFO ][o.e.p.PluginsService ] [es-master-2212299741-0x880] loaded module [percolator]
[2017-05-10T08:57:51,366][INFO ][o.e.p.PluginsService ] [es-master-2212299741-0x880] loaded module [reindex]
[2017-05-10T08:57:51,366][INFO ][o.e.p.PluginsService ] [es-master-2212299741-0x880] loaded module [transport-netty3]
[2017-05-10T08:57:51,366][INFO ][o.e.p.PluginsService ] [es-master-2212299741-0x880] loaded module [transport-netty4]
[2017-05-10T08:57:51,368][INFO ][o.e.p.PluginsService ] [es-master-2212299741-0x880] no plugins loaded
[2017-05-10T08:57:54,135][INFO ][o.e.d.DiscoveryModule ] [es-master-2212299741-0x880] using discovery type [zen]
[2017-05-10T08:57:54,868][INFO ][o.e.n.Node ] [es-master-2212299741-0x880] initialized
[2017-05-10T08:57:54,874][INFO ][o.e.n.Node ] [es-master-2212299741-0x880] starting ...
[2017-05-10T08:57:55,144][INFO ][o.e.t.TransportService ] [es-master-2212299741-0x880] publish_address {10.244.8.2:9300}, bound_addresses {10.244.8.2:9300}
[2017-05-10T08:57:55,159][INFO ][o.e.b.BootstrapChecks ] [es-master-2212299741-0x880] bound or publishing to a non-loopback or non-link-local address, enforcing bootstrap checks
[2017-05-10T08:57:58,387][INFO ][o.e.c.s.ClusterService ] [es-master-2212299741-0x880] detected_master {es-master-2212299741-1j9lm}{NM2PTRGoTeumDqDX9HpPJA}{UYMXBCwlT1iRYA_n2xiIgg}{10.244.65.3}{10.244.65.3:9300}, added {{es-master-2212299741-p1jrt}{RiXtIv1MRZCWo5gLY49SOg}{COlIrU86QZCAGStFmYWhxA}{10.244.55.2}{10.244.55.2:9300},{es-master-2212299741-1j9lm}{NM2PTRGoTeumDqDX9HpPJA}{UYMXBCwlT1iRYA_n2xiIgg}{10.244.65.3}{10.244.65.3:9300},}, reason: zen-disco-receive(from master [master {es-master-2212299741-1j9lm}{NM2PTRGoTeumDqDX9HpPJA}{UYMXBCwlT1iRYA_n2xiIgg}{10.244.65.3}{10.244.65.3:9300} committed version [2]])
[2017-05-10T08:57:58,433][INFO ][o.e.n.Node ] [es-master-2212299741-0x880] started
[2017-05-10T09:00:22,451][INFO ][o.e.c.s.ClusterService ] [es-master-2212299741-0x880] added {{es-client-3170561982-djb1f}{O9m5ywLUQ4GkzxUSmlMaiA}{UrDy6jrUTm-7BolECTI1LA}{10.244.55.3}{10.244.55.3:9300},}, reason: zen-disco-receive(from master [master {es-master-2212299741-1j9lm}{NM2PTRGoTeumDqDX9HpPJA}{UYMXBCwlT1iRYA_n2xiIgg}{10.244.65.3}{10.244.65.3:9300} committed version [4]])
[2017-05-10T09:00:22,628][INFO ][o.e.c.s.ClusterService ] [es-master-2212299741-0x880] added {{es-data-1526844084-8njx2}{PvMdQGwGQt21D4ltTRyu0w}{ukaNsOurSImj4JB9vM4ofA}{10.244.8.3}{10.244.8.3:9300},}, reason: zen-disco-receive(from master [master {es-master-2212299741-1j9lm}{NM2PTRGoTeumDqDX9HpPJA}{UYMXBCwlT1iRYA_n2xiIgg}{10.244.65.3}{10.244.65.3:9300} committed version [5]])
[2017-05-10T09:00:26,671][INFO ][o.e.c.s.ClusterService ] [es-master-2212299741-0x880] added {{es-client-3170561982-mwfhs}{87v1IBw9TSecjwjrBZOpFw}{ywtU3PTGQ56KRLpdy1LnLg}{10.244.65.4}{10.244.65.4:9300},}, reason: zen-disco-receive(from master [master {es-master-2212299741-1j9lm}{NM2PTRGoTeumDqDX9HpPJA}{UYMXBCwlT1iRYA_n2xiIgg}{10.244.65.3}{10.244.65.3:9300} committed version [6]])
[2017-05-10T09:00:28,684][INFO ][o.e.c.s.ClusterService ] [es-master-2212299741-0x880] added {{es-data-1526844084-4mfg3}{F6EWBX0dTPuD0hXNcKqI-w}{ASI3slfvS6GIYweNQLoWpg}{10.244.65.5}{10.244.65.5:9300},}, reason: zen-disco-receive(from master [master {es-master-2212299741-1j9lm}{NM2PTRGoTeumDqDX9HpPJA}{UYMXBCwlT1iRYA_n2xiIgg}{10.244.65.3}{10.244.65.3:9300} committed version [7]])
As we can assert, the cluster is up and running. Easy, wasn't it?
Don't forget that services in Kubernetes are only acessible from containers in the cluster. For different behavior one should configure the creation of an external load-balancer. While it's supported within this example service descriptor, its usage is out of scope of this document, for now.
$ kubectl get svc elasticsearch
NAME CLUSTER-IP EXTERNAL-IP PORT(S) AGE
elasticsearch 10.100.75.158 <pending> 9200:31163/TCP 5m
From any host on the Kubernetes cluster (that's running kube-proxy or similar), run:
curl http://10.100.75.158:9200
One should see something similar to the following:
{
"name" : "es-client-3170561982-mwfhs",
"cluster_name" : "myesdb",
"cluster_uuid" : "TmidWUO6TJqFOd2WmHgg5Q",
"version" : {
"number" : "5.4.0",
"build_hash" : "780f8c4",
"build_date" : "2017-04-28T17:43:27.229Z",
"build_snapshot" : false,
"lucene_version" : "6.5.0"
},
"tagline" : "You Know, for Search"
}Or if one wants to see cluster information:
curl http://10.100.75.158:9200/_cluster/health?pretty
One should see something similar to the following:
{
"cluster_name" : "myesdb",
"status" : "green",
"timed_out" : false,
"number_of_nodes" : 7,
"number_of_data_nodes" : 2,
"active_primary_shards" : 0,
"active_shards" : 0,
"relocating_shards" : 0,
"initializing_shards" : 0,
"unassigned_shards" : 0,
"delayed_unassigned_shards" : 0,
"number_of_pending_tasks" : 0,
"number_of_in_flight_fetch" : 0,
"task_max_waiting_in_queue_millis" : 0,
"active_shards_percent_as_number" : 100.0
}Helm charts for a basic (non-stateful) ElasticSearch deployment are maintained at https://github.com/clockworksoul/helm-elasticsearch. With Helm properly installed and configured, standing up a complete cluster is almost trivial:
$ git clone git@github.com:clockworksoul/helm-elasticsearch.git
$ helm install helm-elasticsearch
The image used in this repo is very minimalist. However, one can install additional plug-ins at will by simply specifying the ES_PLUGINS_INSTALL environment variable in the desired pod descriptors. For instance, to install Google Cloud Storage and X-Pack plug-ins it would be like follows:
- name: "ES_PLUGINS_INSTALL"
value: "repository-gcs,x-pack"Additionally, one can run a CronJob that will periodically run Curator to clean up indices (or do other actions on the Elasticsearch cluster).
kubectl create -f es-curator-config.yaml
kubectl create -f es-curator.yaml
Please, confirm the job has been created.
$ kubectl get cronjobs
NAME SCHEDULE SUSPEND ACTIVE LAST-SCHEDULE
curator 1 0 * * * False 0 <none>
The job is configured to run once a day at 1 minute past midnight and delete indices that are older than 3 days.
Notes
- One can change the schedule by editing the cron notation in
es-curator.yaml. - One can change the action (e.g. delete older than 3 days) by editing the
es-curator-config.yaml. - The definition of the
action_file.yamlis quite self-explaining for simple set-ups. For more advanced configuration options, please consult the Curator Documentation.
If one wants to remove the curator job, just run:
kubectl delete cronjob curator
kubectl delete configmap curator-config
Various parameters of the cluster, including replica count and memory allocations, can be adjusted by editing the helm-elasticsearch/values.yaml file. For information about Helm, please consult the complete Helm documentation.
The default value for this environment variable is 2, meaning a cluster will need a minimum of 2 master nodes to operate. If a cluster has 3 masters and one dies, the cluster still works. Minimum master nodes are usually n/2 + 1, where n is the number of master nodes in a cluster. If a cluster has 5 master nodes, one should have a minimum of 3, less than that and the cluster stops. If one scales the number of masters, make sure to update the minimum number of master nodes through the Elasticsearch API as setting environment variable will only work on cluster setup. More info: https://www.elastic.co/guide/en/elasticsearch/guide/1.x/_important_configuration_changes.html#_minimum_master_nodes
Read a different config file by settings env var path.conf=/path/to/my/config/. Another option would be to build one's own image from this repository
One of the errors one may come across when running the setup is the following error:
[2016-11-29T01:28:36,515][WARN ][o.e.b.ElasticsearchUncaughtExceptionHandler] [] uncaught exception in thread [main]
org.elasticsearch.bootstrap.StartupException: java.lang.IllegalArgumentException: No up-and-running site-local (private) addresses found, got [name:lo (lo), name:eth0 (eth0)]
at org.elasticsearch.bootstrap.Elasticsearch.init(Elasticsearch.java:116) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.bootstrap.Elasticsearch.execute(Elasticsearch.java:103) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.cli.SettingCommand.execute(SettingCommand.java:54) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.cli.Command.mainWithoutErrorHandling(Command.java:96) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.cli.Command.main(Command.java:62) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.bootstrap.Elasticsearch.main(Elasticsearch.java:80) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.bootstrap.Elasticsearch.main(Elasticsearch.java:73) ~[elasticsearch-5.0.1.jar:5.0.1]
Caused by: java.lang.IllegalArgumentException: No up-and-running site-local (private) addresses found, got [name:lo (lo), name:eth0 (eth0)]
at org.elasticsearch.common.network.NetworkUtils.getSiteLocalAddresses(NetworkUtils.java:187) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.common.network.NetworkService.resolveInternal(NetworkService.java:246) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.common.network.NetworkService.resolveInetAddresses(NetworkService.java:220) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.common.network.NetworkService.resolveBindHostAddresses(NetworkService.java:130) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.transport.TcpTransport.bindServer(TcpTransport.java:575) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.transport.netty4.Netty4Transport.doStart(Netty4Transport.java:182) ~[?:?]
at org.elasticsearch.common.component.AbstractLifecycleComponent.start(AbstractLifecycleComponent.java:68) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.transport.TransportService.doStart(TransportService.java:182) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.common.component.AbstractLifecycleComponent.start(AbstractLifecycleComponent.java:68) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.node.Node.start(Node.java:525) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.bootstrap.Bootstrap.start(Bootstrap.java:211) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.bootstrap.Bootstrap.init(Bootstrap.java:288) ~[elasticsearch-5.0.1.jar:5.0.1]
at org.elasticsearch.bootstrap.Elasticsearch.init(Elasticsearch.java:112) ~[elasticsearch-5.0.1.jar:5.0.1]
... 6 more
[2016-11-29T01:28:37,448][INFO ][o.e.n.Node ] [kIEYQSE] stopping ...
[2016-11-29T01:28:37,451][INFO ][o.e.n.Node ] [kIEYQSE] stopped
[2016-11-29T01:28:37,452][INFO ][o.e.n.Node ] [kIEYQSE] closing ...
[2016-11-29T01:28:37,464][INFO ][o.e.n.Node ] [kIEYQSE] closed
This is related to how the container binds to network ports (defaults to _local_). It will need to match the actual node network interface name, which depends on what OS and infrastructure provider one uses. For instance, if the primary interface on the node is p1p1 then that is the value that needs to be set for the NETWORK_HOST environment variable.
Please see the documentation for reference of options.
In order to workaround this, set NETWORK_HOST environment variable in the pod descriptors as follows:
- name: "NETWORK_HOST"
value: "_eth0_" #_p1p1_ if interface name is p1p1, ens4 would be _ens4_, etc