/docker-deluge-openvpn

Docker container which runs Deluge torrent client with WebUI while connecting to OpenVPN. Based on linuxserver/deluge and haugene/transmission-openvpn.

Primary LanguageShellGNU General Public License v3.0GPL-3.0

OpenVPN and Deluge with WebUI

Docker Automated build Docker Pulls

This container contains OpenVPN and Deluge with a configuration where Deluge is running only when OpenVPN has an active tunnel. It bundles configuration files for many popular VPN providers to make the setup easier.

You need to specify your provider and credentials with environment variables, as well as mounting volumes where the data should be stored. An example run command to get you going is provided below.

Run container from Docker registry

The container is available from the Docker registry and this is the simplest way to get it. To run the container use this command:

$ docker run --cap-add=NET_ADMIN --device=/dev/net/tun -d \
              --restart unless-stopped \
              -v </path/to/deluge/config>:/config \
              -v </path/to/your/downloads>:/downloads \
              -v /etc/localtime:/etc/localtime:ro \
              -e PUID=1001 \
              -e PGID=1001 \
              -e UMASK_SET=<022> \
              -e TZ=<timezone> \
              -e OPENVPN_PROVIDER=PIA \
              -e OPENVPN_CONFIG=CA\ Toronto \
              -e OPENVPN_USERNAME=user \
              -e OPENVPN_PASSWORD=pass \
              -e LOCAL_NETWORK=192.168.0.0/16 \
              -p 8112:8112 \
              sgtsquiggs/deluge-openvpn

You must set the environment variables OPENVPN_PROVIDER, OPENVPN_USERNAME and OPENVPN_PASSWORD to provide basic connection details.

The OPENVPN_CONFIG is an optional variable. If no config is given, a default config will be selected for the provider you have chosen. Find available OpenVPN configurations by looking in the openvpn folder of the GitHub repository. The value that you should use here is the filename of your chosen openvpn configuration without the .ovpn file extension. For example:

-e "OPENVPN_CONFIG=ipvanish-AT-Vienna-vie-c02"

You can also provide a comma separated list of openvpn configuration filenames. If you provide a list, a file will be randomly chosen in the list, this is useful for redundancy setups. For example:

-e "OPENVPN_CONFIG=ipvanish-AT-Vienna-vie-c02,ipvanish-FR-Paris-par-a01,ipvanish-DE-Frankfurt-fra-a01"

If you provide a list and the selected server goes down, after the value of ping-timeout the container will be restarted and a server will be randomly chosen, note that the faulty server can be chosen again, if this should occur, the container will be restarted again until a working server is selected.

To make sure this work in all cases, you should add --pull-filter ignore ping to your OPENVPN_OPTS variable.

As you can see, the container also expects a data volume to be mounted. This is where Transmission will store your downloads, incomplete downloads and look for a watch directory for new .torrent files. By default a folder named transmission-home will also be created under /data, this is where Transmission stores its state.

Supported providers

This is a list of providers that are bundled within the image. Feel free to create an issue if your provider is not on the list, but keep in mind that some providers generate config files per user. This means that your login credentials are part of the config an can therefore not be bundled. In this case you can use the custom provider setup described later in this readme. The custom provider setting can be used with any provider.

Provider Name Config Value (OPENVPN_PROVIDER)
Anonine ANONINE
AnonVPN ANONVPN
BlackVPN BLACKVPN
BTGuard BTGUARD
Cryptostorm CRYPTOSTORM
Cypherpunk CYPHERPUNK
FreeVPN FREEVPN
FrootVPN FROOT
FrostVPN FROSTVPN
Giganews GIGANEWS
HideMe HIDEME
HideMyAss HIDEMYASS
IntegrityVPN INTEGRITYVPN
IPredator IPREDATOR
IPVanish IPVANISH
IronSocket IRONSOCKET
Ivacy IVACY
IVPN IVPN
Mullvad MULLVAD
Newshosting NEWSHOSTING
NordVPN NORDVPN
OVPN OVPN
Perfect Privacy PERFECTPRIVACY
Private Internet Access PIA
PrivateVPN PRIVATEVPN
proXPN PROXPN
proxy.sh PROXYSH
PureVPN PUREVPN
RA4W VPN RA4W
SaferVPN SAFERVPN
SlickVPN SLICKVPN
Smart DNS Proxy SMARTDNSPROXY
SmartVPN SMARTVPN
TigerVPN TIGER
TorGuard TORGUARD
Trust.Zone TRUSTZONE
TunnelBear TUNNELBEAR
UsenetServerVPN USENETSERVER
Windscribe WINDSCRIBE
VPNArea.com VPNAREA
VPN.AC VPNAC
VPN.ht VPNHT
VPNBook.com VPNBOOK
VPNFacile VPNFACILE
VPNTunnel VPNTUNNEL
VyprVpn VYPRVPN

Required environment options

Variable Function Example
OPENVPN_PROVIDER Sets the OpenVPN provider to use. OPENVPN_PROVIDER=provider. Supported providers and their config values are listed in the table above.
OPENVPN_USERNAME Your OpenVPN username OPENVPN_USERNAME=asdf
OPENVPN_PASSWORD Your OpenVPN password OPENVPN_PASSWORD=asdf

Network configuration options

Variable Function Example
OPENVPN_CONFIG Sets the OpenVPN endpoint to connect to. OPENVPN_CONFIG=UK Southampton
OPENVPN_OPTS Will be passed to OpenVPN on startup See OpenVPN doc
LOCAL_NETWORK Sets the local network that should have access. Accepts comma separated list. LOCAL_NETWORK=192.168.0.0/24

Firewall configuration options

When enabled, the firewall blocks everything except traffic to the peer port and traffic to the rpc port from the LOCAL_NETWORK and the internal docker gateway.

If TRANSMISSION_PEER_PORT_RANDOM_ON_START is enabled then it allows traffic to the range of peer ports defined by TRANSMISSION_PEER_PORT_RANDOM_HIGH and TRANSMISSION_PEER_PORT_RANDOM_LOW.

Variable Function Example
ENABLE_UFW Enables the firewall ENABLE_UFW=true
UFW_ALLOW_GW_NET Allows the gateway network through the firewall. Off defaults to only allowing the gateway. UFW_ALLOW_GW_NET=true
UFW_EXTRA_PORTS Allows the comma separated list of ports through the firewall. Respects UFW_ALLOW_GW_NET. UFW_EXTRA_PORTS=9910,23561,443
UFW_DISABLE_IPTABLES_REJECT Prevents the use of REJECT in the iptables rules, for hosts without the ipt_REJECT module (such as the Synology NAS). UFW_DISABLE_IPTABLES_REJECT=true

User configuration options

By default everything will run as the root user. However, it is possible to change who runs the Deluge process. You may set the following parameters to customize the user id that runs Deluge.

Variable Function Example
PUID Sets the user id who will run Deluge PUID=1003
PGID Sets the group id for the Deluge user PGID=1003

Dropping default route from iptables (advanced)

Some VPNs do not override the default route, but rather set other routes with a lower metric. This might lead to the default route (your untunneled connection) to be used.

To drop the default route set the environment variable DROP_DEFAULT_ROUTE to true.

Note: This is not compatible with all VPNs. You can check your iptables routing with the ip r command in a running container.

Use docker env file

Another way is to use a docker env file where you can easily store all your env variables and maintain multiple configurations for different providers. In the GitHub repository there is a provided DockerEnv file with all the current transmission and openvpn environment variables. You can use this to create local configurations by filling in the details and removing the # of the ones you want to use.

Please note that if you pass in env. variables on the command line these will override the ones in the env file.

See explanation of variables above. To use this env file, use the following to run the docker image:

$ docker run --cap-add=NET_ADMIN --device=/dev/net/tun -d \
              -v /your/storage/path/:/data \
              -v /etc/localtime:/etc/localtime:ro \
              --env-file /your/docker/env/file \
              -p 9091:9091 \
              haugene/transmission-openvpn

Access the WebUI

But what's going on? My http://my-host:8112 isn't responding? This is because the VPN is active, and since docker is running in a different ip range than your client the response to your request will be treated as "non-local" traffic and therefore be routed out through the VPN interface.

Known issues, tips and tricks

Use Google DNS servers

Some have encountered problems with DNS resolving inside the docker container. This causes trouble because OpenVPN will not be able to resolve the host to connect to. If you have this problem use dockers --dns flag to override the resolv.conf of the container. For example use googles dns servers by adding --dns 8.8.8.8 --dns 8.8.4.4 as parameters to the usual run command.

Restart container if connection is lost

If the VPN connection fails or the container for any other reason loses connectivity, you want it to recover from it. One way of doing this is to set environment variable OPENVPN_OPTS=--inactive 3600 --ping 10 --ping-exit 60 and use the --restart=always flag when starting the container. This way OpenVPN will exit if ping fails over a period of time which will stop the container and then the Docker deamon will restart it.

Adding new providers

If your VPN provider is not in the list of supported providers you could always create an issue on GitHub and see if someone could add it for you. But if you're feeling up for doing it yourself, here's a couple of pointers.

You clone this repository and create a new folder under "openvpn" where you put the .ovpn files your provider gives you. Depending on the structure of these files you need to make some adjustments. For example if they come with a ca.crt file that is referenced in the config you need to update this reference to the path it will have inside the container (which is /etc/openvpn/...). You also have to set where to look for your username/password.

There is a script called adjustConfigs.sh that could help you. After putting your .ovpn files in a folder, run that script with your folder name as parameter and it will try to do the changes described above. If you use it or not, reading it might give you some help in what you're looking to change in the .ovpn files.

Once you've finished modifying configs, you build the container and run it with OPENVPN_PROVIDER set to the name of the folder of configs you just created (it will be lowercased to match the folder names). And that should be it!

So, you've just added your own provider and you're feeling pretty good about it! Why don't you fork this repository, commit and push your changes and submit a pull request? Share your provider with the rest of us! :) Please submit your PR to the dev branch in that case.

Using a custom provider

If you want to run the image with your own provider without building a new image, that is also possible. For some providers, like AirVPN, the .ovpn files are generated per user and contains credentials. They should not be added to a public image. This is what you do:

Add a new volume mount to your docker run command that mounts your config file: -v /path/to/your/config.ovpn:/etc/openvpn/custom/default.ovpn

Then you can set OPENVPN_PROVIDER=CUSTOMand the container will use the config you provided. If you are using AirVPN or other provider with credentials in the config file, you still need to set OPENVPN_USERNAME and OPENVPN_PASSWORD as this is required by the startup script. They will not be read by the .ovpn file, so you can set them to whatever.

Note that you still need to modify your .ovpn file as described in the previous section. If you have an separate ca.crt file your volume mount should be a folder containing both the ca.crt and the .ovpn config.