This project contains a Bash script for controlling the status LEDs found on a Unifi XG Server (Model: UAS-XG). The script allows for toggling the individual or multiple LEDs based on user input.
- Toggle the individual LEDs including the main status LED around the Unifi logo and the HDD tray LEDs.
- The UAS-LED .deb file from Ubiquiti's UAS-XG setup ISO.
Install the uas-led .deb file:
sudo dpkg -i uas-led_0.0.1-4_amd64.deb
Start uas-led as a service:
sudo systemctl start uas-led
sudo systemctl enable uas-led
To run the script, clone this repository and execute the following commands:
chmod +x led_control.sh
sudo ./led_control.sh
- Below are the links to the references detailing where to source the .deb, as well as an introduction to how to change the LEDs without this script.
- Corresponding LEDs with their GPIO pin IDs: 1 - Main Status LED (RED) 68 - Main Status LED (BLUE) 69 - Main Status LED (WHITE) 17 - Main Status LED (BLINKING WHITE) 70 - Left Drive Tray LED - (RED) 6 - Right Drive Tray LED - (RED) 7 - N/A / UNKNOWN 71 - N/A / UNKNOWN
GPIO ID information found from the X10SDV-4C-TLN2F Manual
ssjenkins on the UI Community Forum bauerle on the UI Community Forum
Contributions are welcome as this is only a script. Please fork the project and submit a pull request for any changes/fixes.
This project is licensed under the MIT License - see the LICENSE file for details.