VRBS Power Control

Virtual Reality Base Station Power Control

Allows you to toggle the power state of your HTC/Valve Lighthouse Base Stations between on and sleep modes using Bluetooth LE, on Windows/Linux

Useful if you have an Oculus or other headset that isn't able to automatically manage the power state through SteamVR

Requirements

Python >= 3.7 and pip
Bluetooth >= 4.0 adapter supporting Bluetooth LE (anything made in the last ~10 years should work)
Windows 10, Linux
- Linux is not tested yet, and macOS most likely does not work.
On Windows, you might need to pair the base stations to your PC beforehand. In testing this was not necessary, but Windows 10 changed their BLE API and made it less reliable for no good reason.

Installation

Windows

Install python from the Microsoft Store
Install pip using the following command:

python -m ensurepip --upgrade

Install bleak using the following command:

pip install bleak

If the installation of bleak fails on Windows, you might need to upgrade pip, or if that still fails, install the C++ CMake tools from the Visual Studio Installer

Linux

Install python using your package manager. For example, with Ubuntu:

sudo apt-get install python3

Install pip using the following command:

python -m ensurepip --upgrade

Install bleak using the following command:

pip install bleak

Usage

Run the command with either "on" or "off" as an argument. The default is "on".

For example:

python vr_bs_control.py on

The program will search for any base stations and attempt to send the command to wake/sleep respectively.

For V1 (HTC) base stations, it can take up to 60 seconds for them to enter sleep mode. Waking up, however, should be almost instant. V2 (Valve) base stations will wake/sleep instantly.

Using the --save option will write any found base station's addresses to basestations.txt. Upon running the program after this, it will reuse the saved addresses in the text file and skip the five second long scan process. Running the program with the --save option while saved addresses are already present will re-scan and re-save the addressess, useful if you install a new base station. This file can also easily be manually edited to add or remove addresses if needed. You can also run the program with both the -d and -s options to scan for and save basestation addresses without having them change power state.

Optional Arguments

htc_bs_control.py [-h] [-s] [-d] [STATE]

Argument	Description
STATE	Either `on` or `off`, defaults to `on` if not specified
-h, --help	Show the help message and exit
-s, --save	Saves the addresses of the Base Stations.
-d, --dryrun	Runs the program without sending any Bluetooth commands