****************************** * Super Mario Kart Nov'91 * * Prototype Repair * * * * by MrL314 * ****************************** last updated: July 28, 2021 >>>>> Please read through the entire README before starting! <<<<< If you encounter issues, see if your issue is answered in the FAQ section at the bottom. Table of Contents: 1. Setup 2. User Manual 3. FAQ Special Thanks: Sirgren Dirtbag Catador atomic SmorBjorn R4M0N SMK Workshop community and YOU! DISCLAIMERS: -------------------------------------------------------------------------- This set of scripts and programs is provided free of charge and without warranty. It is not to be distributed with any additional files, these must be provided by the user at their own risk. This project is in no way affiliated with Nintendo. I have no connections to Nintendo, and I have not been endorsed or sponsored by Nintendo. ==================================================================== Setup ==================================================================== Requirements: - Python 3 (https://www.python.org/downloads) - I recommend at least Python 3.6. See "Python Notes" below for more info. - bsnes-plus - I have provided a download mirror link below. See "BSNES Notes". - (Optional) bsnes-plus SFX-DOS - I have provided a download mirror link below. See "BSNES Notes". - Please use this version, as it supports the remapping needed to use DOS functions with Super Mario Kart IMPORTANT NOTE: -------------------------------------------------------------------------- To get this repair to work correctly, the .cht file, .xml file, and .srm file MUST have the same file name as the repaired ROM. By default this is done for you, since the repaired ROM is named "Nov91.sfc". However, if you rename the ROM, you must also change the names of the .xml, .cht, and .srm file to the same name. These files MUST always be in the same folder as the repaired ROM to work correctly. Example: if you rename the ROM to "SMKnovember.sfc", you will also need to change the other files to - "SMKnovember.xml" - "SMKnovember.srm" - "SMKnovember.cht" How to build: -------------------------------------------------------------------------- Downloads and Installs: 1. Install Python. (See "Python Notes" below) 2. Download bsnes-plus. You may use the mirror link I provided above. 3. Download bsnes-plus SFX-DOS. You may use the mirror link I provided above. Obtain files: !!! By obtaining these files, you do so at your own risk. !!! 1. Obtain the NEWS_05 folder from the July 24, 2020 gigaleak. 2. Obtain game.hex from NEWS_05/home/kimura/games.lzh/games/temp, and put in this folder. 3. Obtain drive-data from NEWS_05/home/kimura/kart/mak.lzh/mak, and put in this folder. 4. Obtain a USA unheadered (512kb) ROM of Super Mario Kart, and put in this folder. 5. Rename the USA ROM to "Super Mario Kart (USA).sfc" if it is not already named so. 6. Obtain a dsp1b binary (usually literally called dsp1b.bin), and put in this folder. At this point you have two options. If you are doing this just to play around with the Nov'91 prototype, read the instructions in "Build (Base and Fix)". However, if you are building with the intent of research or documentation without all of my other playability fixes on top, read the instructions in "Build (Base Only)". Build (Base and Fix): 1. Run "base_setup.bat". This will create the base repair, without any of the extra fixes. - See "Python Notes" below if you encounter issues with this step. 2. Run "extra_fixes.bat". This will enable ALL of my extra fixes for the prototype. - This includes SFX-DOS repairs. Now read "SFX-DOS or not?" below to continue. Build (Base Only): 1. Run "base_setup.bat". This will create the base repair, without any of the extra fixes. - See "Python Notes" below if you encounter issues with this step. This will not apply any of the extra fixes that I have applied to the code. The only things that are changed by the base repair are that the asset data is added, and the pointers are adjusted accordingly so that the data will be read properly. Now read "SFX-DOS or not?" below to continue. SFX-DOS or not?: If you would like to run in bsnes-plus SFX-DOS, you may do so at this time by opening "Nov91.sfc" in bsnes-plus SFX-DOS. Make sure to open the cheat editor by going to Tools > Cheat Editor, and enable cheats 7 and 8. Then restart the ROM. If you instead would like to run in regular bsnes-plus, first open "Nov91.sfc" in bsnes-plus. Then, go to the cheat editor by going to Tools > Cheat Editor, and enable cheats 2 and 3. Then restart the ROM. This will disable the SFX-DOS stuff, meaning you will be able to run this on regular bsnes-plus. Python Notes: -------------------------------------------------------------------------- - When installing Python, make sure that you select "Add to PATH" during the set up. - Make sure that you turn off app execution aliases if using windows. Go to Settings > Apps > Apps & Features > App execution aliases and turn off all of the ones that say "python". - When running the setup script, if you see the message "'python' is not recognized as an internal or external command, operable program or batch file." you likely will need to edit the settings in "settings.bat". Right click the file and click "Edit". Then edit the python_cmd variable. In most cases, it will work if you change the variable to one of these options: - "python" - "python3" - "py" - "py3" If none of those work, you will need to look up what the PATH variable was set to. Here's a quick guide on how to set the PATH variable. https://datatofish.com/add-python-to-windows-path/ BSNES Notes: -------------------------------------------------------------------------- This repair will ONLY work in BSNES. Due to compatibility issues with other emulators, this prototype cannot run in other emulators or on physical hardware. I apologize for the inconvenience, but ensuring compatibility for all emulators would cause more issues than it would solve. I have made mirror links to the versions of bsnes-plus and bsnes-plus SFX-DOS that I used while making this repair. For the most accurate results, please use these versions: * bsnes-plus: https://www.mediafire.com/file/twtl3tfa902z9rc/bsnes-plus.zip/file * bsnes-plus SFX-DOS: https://www.mediafire.com/file/p1qhc7pal9n0zo5/bsnes-plus-v05.79-sfx-dos.zip/file For the most accurate results, I recommend using the accuracy versions. You are free to try with other versions of bsnes, but I cannot guarantee that they will work as intended. ==================================================================== User Manual ==================================================================== More information on controls can also be found here: https://tcrf.net/Proto:Super_Mario_Kart/November_29,_1991_Proto This is just a compact reference just in case. General controls: ----------------- Start - Pause: Works in most screens and modes. If the game seems to have frozen try pressing start to unpause Y+B+Start+Select - Reset: Works on all modes, use to get back to the main menu from any mode Up/Down - Navigates the menu Left/Right - Change menu values B/Y - Starts with whatever menu values are selected Main Menu: ---------- MODE A = Player 1/ Top screen B = Player 2/ Bottom screen MAN - Human control racer MON - Monitoring mode, debug values are displayed COM - CPU controlled racer PLAY-1/2 - Driver selection (If MAN or COM is selected) PLAY-1 = Player 1 driver PLAY-2 = Player 2 driver MARIO, LUIGI, KOOPA (Bowser), PEACH (Princess), CONG (D.K. J.r.), NOKO (Koopa Troopa), KINO (Toad), YOSSY (Yoshi) DISP-1/2 - Screen mode if MON is selected FR-VIEW - Same perspective as the main screen but with debug values and AI path's denoted with the tracks items REA-VIEW - Backwards looking view of your racer SD-VIEW - Same view as main screen, without extra sprites layers (Lakitu etc.) LONG-PER - View of the whole track (Similar to the final version of the game (Racers sprites are smaller than on the final version) NO-PERS1 - Over head view of of the whole track NO-PERS2 - Over head view of main racer NO-PERS3 - Over head view of main racer but with a keystone effect MAP - Course selection CIRC = Mario Circuit OBAKE = Ghost Valley GRASS = Donut Plains CASTLE = Bower Castle ICE = Vanilla Lake DART = Chocolate Island SAND = Koopa Beach BATTLE = Battle mode test course PROG - Mode RACE = Takes the MODE, PLAY-1, PLAY-2 & MAP Settings and starts a race BATL = Takes the MODE, PLAY-1, PLAY-2 & MAP Settings and starts a battle - Note that the battle mode can be changed via ED-3) - Any course other than BATTLE-1 will result in a VS race style mode without checkpoints - Anything other than MODE MAN-MAN might result in strange effects ED-1 = Editor mode for setting AI Zones and Targets ED-2 = Editor mode for overlay items such as Item boxes and Zippers ED-3 = Settings RACE Mode --------- Just a standard race 5 laps with CPU races, once the race is over it will not progress to another track and you will need to reset back to the main menu. BATL Mode --------- 2 Players on the track to do battle, there is no scoring but you can make the other player spin when you hit them. If you select MAN-MAN and any normal race track (not BATTLE-1) it will result in a VS-like race, but without the Checkpoint Zones. If you select MAN-MON it will result in a VS-like race with a CPU opponent and the MON effect selected If you select MAN-MAN, BATTLE-1 and BATTLE (mode) 0 there will be Coins/ Balls on the track to avoid If you select MAN-MAN, BATTLE-1 and BATTLE (mode) 1 there you can press the L Button to fire projectiles Use ED2 to place item boxes and save to SRAM to make it a bit more interesting. Use ED3 to Enable Machine gun mode ED1: -------- EDITING: D-PAD - Moves the cursor SELECT - Cycles through the AI Zone Editing modes R-Trigger - Opens the Save/Load Menu AI Zone Editing modes: CODE - Set the AI Zone type 00: Rectangle 02: Triangle top-left 04: Triangle top-right 06: Triangle bottom-right 08: Triangle bottom-left 0A: Diagonal Line top-right to bottom-left 0C: Diagonal Line top-left to bottom-right B - Increase the zone type. After 0C, this will remove the zone. Y - Decrease the zone type. After 00, this will remove the zone. SET - Set the AI Zone size. Remove zone - Press Y on the tile you placed in CODE Set zone size - Press B on the tile you placed in CODE (this is your Start_X and Start_Y), then press B on another part of the map. (this is your Final_X and Final_Y) Each zone has specific requirements for size placement. 00: Final_X more right than Start_X, Final_Y lower than Start_Y 02: Final_X equal to Start_X, Final_Y lower than Start_Y 04: Final_X equal to Start_X, Final_Y lower than Start_Y 06: Final_X equal to Start_X, Final_Y higher than Start_Y 08: Final_X equal to Start_X, Final_Y higher than Start_Y 0A: Final_X more left than Start_X, Final_Y lower than Start_Y - Distance between Final_X and Start_X must be less than distance between Final_Y and Start_Y to work properly 0C: Final_X more right than Start_X, Final_Y lower than Start_Y - Distance between Final_X and Start_X must be less than distance between Final_Y and Start_Y to work properly PONT - Setting the AI Targets & Zone speeds. Zone that the current target is connected to is indicated by P in the menu on the left B - Set the Zone Target. Y - Delete the Zone Target. X - Cycle through the Zone Speeds (Indicated by S in the menu on the left) Blue - Speed 1 (Low speed) Green - Speed 2 (Mid-Low speed) Yellow - Speed 3 (Mid-High speed) Red - Speed 4 (High speed) Save/Load Menu: R-Trigger - Closes the Save/Load Menu L-Trigger - Cycles through the save slot numbers (0-5) D-PAD Up/Down - Cycles through Save/Load options S-DISK - Save data to the Floppy Disk (virtual) via the SFX-DOS S-RAM - Save data to SRAM L-DISK - Load data from the Floppy Disk (virtual) via the SFX-DOS L-RAM - Load data from SRAM CLEA - Remove edited data from the course D-PAD Left/Right - Select between YES/NO for Save and Load options B - Executes the selected option Note: When you edit a level, you MUST save to SRAM (by using the S-RAM option) and exit to the main menu (Y+B+START+SELECT). Then when you race/battle on that course, it will use your edited values. ED-2 -------- EDITING: D-PAD - Moves the cursor B - Places the object Y - Deletes the object SELECT - Opens the "SELECT YAKUMONO" Menu R-Trigger - Opens the Save/Load Menu Save/Load Menu: R-Trigger - Closes the Save/Load Menu L-Trigger - Cycles through the save slot numbers (0-5) D-PAD Up/Down - Cycles through Save/Load options S-DISK - Save data to the Floppy Disk (virtual) via the SFX-DOS S-RAM - Save data to SRAM L-DISK - Load data from the Floppy Disk (virtual) via the SFX-DOS L-RAM - Load data from SRAM CLEA - Remove edited data from the course D-PAD Left/Right - Select between YES/NO for Save and Load options B - Executes the selected option SELECT YAKUMONO Menu: SELECT - Closes the "SELECT YAKUMONO" Menu D-PAD Up/Down - to select overlay item type QUES - Item Box NIKO - Used Item box AROW - Zipper Arrow KABE - Multicolored 2x2 Wall D-PAD Left/Right - to select overlay item orientation 0N (Upward facing) 0E (Right facing) 0S (Downward facing) 0W (Left facing) Note: When you edit a level, you MUST save to SRAM (by using the S-RAM option) and exit to the main menu (Y+B+START+SELECT). Then when you race/battle on that course, it will use your edited values. ED-3: ---- Y - Reduce value B - Increase value BATTLE OBJ - If 0, the BATTLE mode will be the coins flying around the field. If 1, the BATTLE mode will be the machine gun mode. BOUND POWER - Collision bounce power. It’s a signed number, so anything 80h and above you need to subtract 256 from it. MODE7 CHAR - Tile map for the course selected under MAP on the main menu COLOR MAP - Palette set for the course selected under MAP on the main menu MARIO - Sprite view of the 8 racers with the palette set for the course selected - Most likley this was used to make sure the drivers sprites looked correct for each theme After you set the values for BATTLE OBJ and BOUND POWER, exit back to the main menu with (Y+B+START+SELECT). This will save your settings. Fun things to try: ------------------ - With MON mode as FR-VIEW, you can see a unique RAM editor, as well as see the AI target coordinates. - You can use the level editor ED-1 to create a custom AI pathing for a track, save it to SRAM and then race on that track with that AI setup. - You can use the level editor ED-2 to set item boxes on the course, save it to SRAM and then battle/ race on that track with items. - You can toggle item debug mode by pressing L+R+X+A - You can toggle the mini memory viewer by pressing L+R+Down+SELECT - You can toggle the CPU usage viewer by pressing L+R+Up+SELECT while in MON mode Things to be aware of: ---------------------- This is early code, so it is full of bugs, the game can crash easily. ==================================================================== FAQ ==================================================================== Q: The script says "'python' is not recognized as an internal or external command, operable program or batch file." A: See "Python Notes" above. Q: The base patch batch script keeps opening up the Windows Store. A: See "Python Notes" above. Q: Why is the screen blue with a weird glitched sprite on the top left? A: You are running the SFX-DOS enabled version on normal BSNES. Make sure you disable the SFX-DOS via the cheat editor by enabling cheats 2 and 3, then restarting the ROM. Q: Why can't this run on snes9x, zsnes, retroarch, etc.? A: See "BSNES Notes" above. Q: I loaded in my data using the L-DISK command. Why is it not showing up in the race? A: The data that gets used comes from SRAM. So, you need to first use L-DISK to load the data, and then use S-RAM to save it to SRAM. Then it will show up in the race. Q: The game freezes when I try to use L-DISK. A: Most likely the save data is missing from the floppy disk. If you never saved to the disk using S-DISK for that file, this will happen. You can only load from the disk if there is data for that file already on that disk. You can check if your file was saved by opening the floppy disk created by BSNES-plus SFX_DOS in a hex editor (my personal preference is HxD) and going to around address 2000. The file should be named in this format: ABBB-CD, where A - is the editing mode: R for ED-1, Y for ED-2 BBB-C - is the track name and number where BBB can be CIR = CIRCUIT OBA = OBAKE GRA = GRASS CAS = CASTLE ICE = ICE DAR = DART SAN = SAND BTL = BATTLE and C can be a value from 1-4 depending on the track name. D - is the save slot number, (0-5) For example, the file name "YCAS-32" indicates A = Y (ED-2 mode) BBB-C = CAS-3 (CASTLE-3 map) D = 2 (Save slot 2) and the file name "RCIR-41" indicates A = R (ED-1 mode) BBB-C = CIR-4 (CIRCUIT-4 map) D = 1 (Save slot 1) If the file name does not exist, this will crash the game. Alternatively, if you have the dos.hex tool working, you may copy the floppy disk files, rename them accordingly, and then run dos.hex in BSNES-plus SFX-DOS. Input the command "chdisk dd9", press enter, and then input the command "dir". This will show you a list of the files saved on the disks. If your file is not listed, it doesn't exist, and will crash the game when trying to load it. TL;DR - L-DISK only works if the file exists, which happens after you save it using S-DISK. Q: I messed up my SRAM file, and I want to revert my changes to the original version. How do I do that? A: Run the reset_sram.bat file after closing BSNES. This will revert the SRAM to its default. Q: The game won't let me go to the main menu with the button combo Y+B+START+SELECT A: The game has likely hard crashed and will need to be restarted manually. Q: How do I download this? A: Here's a quick download link. https://github.com/MrL314/smknov91/archive/refs/heads/main.zip -MrL314