MrYsLab/pymata-aio

Issues

• Callback never getting called using pymata-core

  #105 opened 5 years ago by Petapton
  3

• asyncio.set_event_loop_policy(asyncio.WindowsSelectorEventLoopPolicy()) Error

  #104 opened 5 years ago by abixadamj
  3

• Wrong calculation of first analog pin

  #103 opened 5 years ago by michsens
  7

• Do not destroy existing loops

  #102 opened 5 years ago by DaAwesomeP
  6

• Using analog inputs above A9 on Arduino Mega causes an exception

  #101 opened 5 years ago by MrYsLab
  1

• Firmata Plus is not compiling on arduino nano

  #100 opened 5 years ago by AlessandroDotta
  2

• Typo found in pymata_iot.py

  #99 opened 5 years ago by MrYsLab
  1

• Pymata_aio call back

  #97 opened 5 years ago by nikhilabhi
  2

• Is WeMos / Esp8266 boards supported?

  #98 opened 5 years ago by hyansuper
  1

• Throw exceptions instead of exiting

  #94 opened 6 years ago by DaAwesomeP
  11

• Installing FirmataPlus on arduino DUE

  #96 opened 5 years ago by wlwatkins
  30

• ULTRASONIC Sensor HC-SR04

  #95 opened 5 years ago by nikhilabhi
  6

• Shutting Down Write Exception

  #92 opened 6 years ago by VinealShiloh
  4

• calls to exit() rather than sys.exit() in pymata_core.py

  #81 opened 6 years ago by ericwertz
  21

• IndexError with Analog Pin

  #91 opened 6 years ago by YugeshCK
  6

• Use-dependent write timeouts

  #72 opened 6 years ago by chelsell
  5

• Trying to read from RX

  #88 opened 6 years ago by MrYsLab
  4

• OneWire

  #80 opened 6 years ago by voidloop
  19

• Use digital pin number internally when setting analog input mode

  #87 opened 6 years ago by MrYsLab
  1

• Rotary Encoder support not functioning

  #86 opened 6 years ago by MrYsLab
  1

• pymata win10

  #79 opened 6 years ago by labF212
  9

• using current Arduino IDE, FirmataPlusMrYsLab.ino gives warnings when compiled

  #85 opened 6 years ago by ericwertz
  9

• Change exit(0) to sys.exit(0) for consistency (Not a bug, just code cleanup)

  #82 opened 6 years ago by MrYsLab
  1

• Remove first entry in the "locations" list in pymata_core.py. Cosmetic.

  #83 opened 6 years ago by MrYsLab
  1

• pls bump up PyMata3(arduino_wait=xxx) default value from 2 to >=3

  #84 opened 6 years ago by ericwertz
  2

• PymataCore.shutdown shouldn't call sys.exit(0)

  #66 opened 7 years ago by alberand
  6

• RuntimeError: There is no current event loop in thread 'Dummy-1'.

  #78 opened 6 years ago by CuyiGuaton
  5

• Revisit calls to generate reports and other sections that use asyncio.ensure_future

  #74 opened 6 years ago by MrYsLab
  0

• pymata_iot crashes when running python 3.7

  #71 opened 6 years ago by MrYsLab
  1

• INPUT_PULLUP mode clashes with SONAR

  #70 opened 6 years ago by toxuin
  3

• pymata_core.get_analog_map() times out prematurely on some Arduino boards

  #60 opened 7 years ago by VincentYZ
  14

• Analogs reads

  #69 opened 6 years ago by orkonet
  1

• Can't Initialize Pymata Object In Anaconda/Spyder

  #68 opened 6 years ago by bjfurman
  1

• RuntimeError: This event loop is already running

  #67 opened 6 years ago by troymessina
  5

• burn hex and reconnect arduino

  #64 opened 7 years ago by ouki-wang
  3

• How can I make a unit test for board connection?

  #63 opened 7 years ago by JosephMart
  2

• different behaviour when running under VS code and from bash

  #62 opened 7 years ago by jara1
  11

• issues running from secondary thread

  #61 opened 7 years ago by Denao2
  6

• pymata fails with ping

  #59 opened 7 years ago by tim-nixon
  5

• _encoder_data() missing 1 required positional argument: 'data'

  #58 opened 7 years ago by dtheb
  12

• latch example not working?

  #57 opened 7 years ago by dtheb
  8

• Reconnecting, isConnected, or timeout exception?

  #55 opened 7 years ago by dtheb
  5

• Analog data callback functions persist past shutdown and interfere with new board initialization

  #54 opened 7 years ago by chelsell
  4

• Replace print statements with python built in logging

  #53 opened 8 years ago by ajd394
  2

• ping.py with HC-SR04 not printing values

  #52 opened 8 years ago by pragyhazarika
  6

• how to invoke pymata_aio socket for web control?

  #51 opened 8 years ago by cryoguy
  5

• how to install on raspberry pi?

  #50 opened 8 years ago by ash73
  4

• Compatibility and Python 3.6

  #49 opened 8 years ago by NervenCid
  2

• Error after initializing with the board

  #47 opened 8 years ago by adamdrenth
  15

• Compiling Error "Linking everything together..." FirmataPlus

  #48 opened 8 years ago by maxfischer-omics
  16