Mrnt/OctoPrint-FlashForge

Issues

• Does Adventurer 4 work/supported?

  #86 opened 2 years ago by guysoft
  1

• SD Wifi (FlashAir) support for not sd enabled Flashforge printers

  #87 opened a year ago by msmthng
  1

• FlashForge Finder 3 Support

  #88 opened a year ago by MORITZ0405
  1

• how to fix this error it does not want to connect to the printer

  #85 opened 2 years ago by gabbelitoV2
  7

• Flashforge Artemis won't work

  #84 opened 2 years ago by ronaldarroyowatson
  0

• Filament Ejects After Print Finishes (Finder 2)

  #76 opened 2 years ago by martonbaksa
  1

• Finder V2 Issues After Upgrade - Tool Temp, Bed Position, Stepper Noise

  #75 opened 2 years ago by brendanm720
  4

• M104 issue with new firmware 2.8.4

  #77 opened 2 years ago by AndreaCCIE
  1

• Creatorbot 3D Pro Series II

  #82 opened 2 years ago by TheChief0117
  1

• Trouble connecting to Dreamer, port/baudrate issue

  #80 opened 2 years ago by schmooot
  2

• Flashforge Dreamer not detected by OctoPi

  #79 opened 3 years ago by MialTheMimiga
  3

• Flashforge Creator Pro 2 issues

  #78 opened 3 years ago by Parker-Bergen
  12

• Flashforge dreamerNX issues connecting

  #67 opened 4 years ago by glimpsewearables
  1

• Dremel 3d45

  #30 opened 5 years ago by garyriet
  16

• Cannot connect to Dreamer NX single extruder

  #64 opened 3 years ago by Kellimz92
  11

• I have a Dremel 3D40 and I'd like to contribute

  #60 opened 4 years ago by number-g
  49

• Sending a file uploaded to octoprint via Prucaslic3r to the printer via the "Upload to SD" button.

  #33 opened 5 years ago by KeltE
  24

• Dreamer not setting bed height correctly?

  #63 opened 4 years ago by G7KXZ
  13

• Cannot Connect To FlashForge Guider II

  #34 opened 5 years ago by maesoph
  14

• Checking out my Saurus with Flashforge under OctoPrint

  #74 opened 4 years ago by Oxize
  13

• Any ideas of making all other Flashforge products fully compatible with Octoprint

  #73 opened 4 years ago by Oxize
  7

• Direct Printing Not working

  #61 opened 4 years ago by reuter
  4

• FF Finder 2 print from OctoPrint issues

  #72 opened 4 years ago by AndreaCCIE
  0

• Creator Pro 2. Second Extruder Issues.

  #71 opened 4 years ago by CGB0
  1

• More Flashforge G-code commands

  #70 opened 4 years ago by KeltE
  0

• Total Bytes Dremel 3D20

  #22 opened 5 years ago by jimprince
  13

• Guider II stalls at M400 during local printing

  #69 opened 4 years ago by Ben3141592
  1

• Guider II print progress is incorrect printing from SD

  #68 opened 4 years ago by Ben3141592
  0

• Flash-forge dreamer (dual extruder) issues connecting!

  #65 opened 4 years ago by Gamereric21
  23

• OctoPrint goes offline while printing

  #48 opened 4 years ago by zenixnet
  8

• Various errors when trying to print / connect

  #62 opened 4 years ago by zenixnet
  4

• Can't upload to SDCard anymore.

  #58 opened 4 years ago by reuter
  2

• Dremel 3D20 times out during/after streaming to SD

  #32 opened 5 years ago by RenskeB
  7

• Dremel 3D45 printer head trying to go past home position

  #46 opened 4 years ago by visualvalhalla
  26

• Supported Gcode document

  #50 opened 4 years ago by visualvalhalla
  1

• Can't connect to Flashforge Finder

  #51 opened 4 years ago by devslashlol
  29

• When plugin is enabled, cannot create new printer profiles

  #52 opened 4 years ago by devslashlol
  2

• 0.2.4 can't process simplify3d gcode file when printing from SD Card

  #55 opened 4 years ago by devslashlol
  66

• Flashforge Finder does not re-connect after a print is completed

  #56 opened 4 years ago by devslashlol
  2

• 0.2.4 appears to prevent access to the plugin repository

  #54 opened 4 years ago by devslashlol
  1

• Dremel 3D20: Timeouts while Connecting w/M27

  #40 opened 4 years ago by eduncan911
  57

• Flashforge Finder 2 - Print not working

  #45 opened 4 years ago by reuter
  32

• FlashForge Finder 2.0 - Controlling Movement

  #29 opened 5 years ago by rmhalvorsen
  58

• Octoprint 1.4.1

  #37 opened 4 years ago by rmhalvorsen
  12

• Issue connecting

  #41 opened 4 years ago by Fred583
  9

• Why should someone use this instead of the GPX Plugin?

  #31 opened 5 years ago by Toylerrr
  1

• [Request] Support Flashforge Creator 3 IDEX v2 via WiFi/ethernet

  #25 opened 5 years ago by lukedog5990
  3

• Flashforge Guider II

  #27 opened 5 years ago by jayceekeys
  27

• Register in plugin repository?

  #24 opened 5 years ago by foosel
  7

• Support DisplayLayerProgress plugin

  #21 opened 5 years ago by jumpingmushroom
  16