GrabBag

Summary: Collection of miscellaneous commands and listener modules
PocketMine-MP version: 1.4 (API:1.10.0), 1.4.1 (API:1.11.0), 1.5 (API:1.12.0)
DependencyPlugins:
OptionalPlugins: FastTransfer
Categories: General
Plugin Access: Internet Services, Other Plugins, Manages Permissions, Commands, Data Saving, Entities, Tile Entities, Manages Plugins
WebSite: https://github.com/Muirfield/GrabBag

Overview

NOTE:

This documentation was last updated for version 2.3.0.

Please go to github for the most up-to-date documentation.

You can also download this plugin from this page.

A miscellaneous collection of commands and listener modules. All features can be configured to be disabled|enabled so as to co-exist with other plugins.

This plugin is focused more towards commands to help system administration.

Entity Management

entities: entity management

Informational

ops: Shows who are the ops on this server.
players: Shows what players are on-line
showtimings: Shows timing repots as reported by timings
whois: Gives detailed information on players

Inventory Management

clearhotbar: Clear player's hotbar
clearinv: Clear player's inventory
get: obtain an item
gift: give an item to a player
rminv: Remove item from player's Inventory
seearmor: Show player's armor
seeinv: Show player's inventory
setarmor: Sets armor (even in creative)

Player Management

as: run command as somebody else
clearchat: Clears your chat window
fly: Toggle flying ONLY FOR PM >1.5
gma: Change your gamemode to Adventure.
gmc: Change your gamemode to Creative.
gms: Change your gamemode to Survival.
gmspc: Change your gamemode to Spectator.
invis: makes player invisible
nick: Change your display name
perm: temporarily change player's permissions
prefix: prepend prefix to chat lines
reg: Manage player registrations
reop: Let ops drop priviledges temporarily
shield: player is protected from taking damage
skin: manage player's skins

Server Management

after: schedule command after a number of seconds
alias: Create a new command alias
at: schedule command at an appointed date/time
crash: manage crash dumps
opms: sends a message to ops only
pluginmgr: manage plugins
query: query remote servers
rcon: rcon client
rpt: report an issue to ops
servers: Manage peer server connections
servicemode: controls servicemode

Teleporting

dismiss: Dismiss a previously summoned player
follow: Follow a player
follow-off: stop following a player
followers: List who is following who
followme: Make a player follow you
followme-off: stop making a player follow you
ftserver: Travel to remove servers
poptp: Returns to the previous location
pushtp: Saves current location and teleport
spawn: Teleport player to spawn point
summon: Summons a player to your location

Trolling

blowup: explode a player
burn: Burns the specified player
chat-on|chat-off: Allow players to opt-out from chat
freeze|thaw: freeze/unfreeze a player so they cannot move.
heal: Restore health to a player
mute|unmute: mutes/unmutes a player so they can not use chat
slay: Kills the specified player
spectator|unspectator: toggle a player's spectator mode (DEPRECATED)
throw: Throw a player in the air

Modules

blood-particles: Display particles when a player gets hit
broadcast-ft: Broadcast player's using FastTransfer
broadcast-tp: Broadcast player teleports
cmd-selector: Implements "@" command prefixes
join-mgr: Announce joining ops, and show server motd
repeater: Uses !! to repeat command with changes

Documentation

This plugin collects a number of commands and listener plugins that I find useful and wanted to have in a single plugin rather through multiple ones. The available commands and listener modules can be configured. This allows this plugin to co-exist peacefully with other plugins.

Command Reference

The following commands are available:

after: schedule command after a number of seconds
usage: after <seconds> <command>|list|cancel <id>

Will schedule to run command after seconds. The list sub command will show all the queued commands. The cancel sub command allows you to cancel queued commands.
alias: Create a new command alias
usage: alias [-f] <alias> <command> [options]

Create an alias to a command. Use the -f to override existing commands
as: run command as somebody else
usage: as <player> <command>
at: schedule command at an appointed date/time
usage: at <time> [:] _<command>|list|cancel <id>

Will schedule to run command at the given date/time. This uses php's strtotime function so times must follow the format described in Date and Time Formats. The list sub command will show all the queued commands. The cancel sub command allows you to cancel queued commands.
blowup: explode a player
usage: blowup <player> [yield] [magic] [normal]

Explodes player with an explosion with the given yield (a number). If magic is specified no damage will be taken by blocks. The default is normal, where blocks do get damaged.
burn: Burns the specified player
usage: burn <player> [secs]

Sets player on fire for the specified number of seconds. Default is 15 seconds.
chat-on|chat-off: Allow players to opt-out from chat
usage: chat-on|chat-off [player|--list|--server]

Prevents players from sending/receiving chat messages. The following options are recognized:
- --list : Lists the players that have chat on/off status
- --server : Globally toggles on/off chat.
clearchat: Clears your chat window
usage: clearchat
clearhotbar: Clear player's hotbar
usage: clearhotbar [player]
clearinv: Clear player's inventory
usage: clearinv [player]
crash: manage crash dumps
usage: crash [ls|clean|show]

Will show the number of crash files in the server. The following optional sub-commands are available:
- crash count
  - Count the number of crash files
- crash ls [pattern]
  - List crash files
- crash clean [pattern]
  - Delete crash files
- show [pattern]
  - Shows the crash file ##
dismiss: Dismiss a previously summoned player
usage: dismiss <player> [message]
entities: entity management
usage: entities [subcommand] [options]

By default it will show the current entities. The following sub-commands are available:
- entities ls [world]
  - Show entities in [world] (or current world if not specified).
- entities tiles [world]
  - Show tile entities in [world] (or current world if not specified).
- entities info [e#|t#]
  - Show details about one or more entities or tiles.
- entities rm [e#]
  - Removes one or more entities.
- entities signN [t#] message text
  - Changes the text line N in the tile/sign identified by t#.
- entities count
  - Show a count of the number of entities on the server.
- entities nuke [all|mobs|others]
  - Clear entities from the server.
Additionally, tiles can be specified by providing the following:
- t(x),(y),(z)[,world]
fly: Toggle flying ONLY FOR PM >1.5
usage: fly
follow: Follow a player
usage: follow <player>
follow-off: stop following a player
usage: follow-off
followers: List who is following who
usage: followers
followme: Make a player follow you
usage: folowme <player>
followme-off: stop making a player follow you
usage: followme-off <player>
freeze|thaw: freeze/unfreeze a player so they cannot move.
usage: freeze|thaw [ player | --hard|--soft ]

Stops players from moving. If no player specified it will show the list of frozen players.

If --hard or --soft is specified instead of a player name, it will change the freeze mode.
ftserver: Travel to remove servers
usage: ftserver <serverid>

Teleport to servers defined with the /servers command.
get: obtain an item
usage: get <item> [count]

This is a shortcut to give that lets player get items for themselves. You can replace item with more and the current held item will be duplicated.
gift: give an item to a player
usage: gift [player] <item> [count]

This is a re-implementation of give command.
gma: Change your gamemode to Adventure.
usage: gma
gmc: Change your gamemode to Creative.
usage: gmc
gms: Change your gamemode to Survival.
usage: gms
gmspc: Change your gamemode to Spectator.
usage: gmspc
heal: Restore health to a player
usage: heal [player] [ammount]

Heals a player. If the amount is positive it will heal, if negative the player will be hurt. The units are in 1/2 hearts.
invis: makes player invisible
usage: invis This will toggle your invisibility status.
mute|unmute: mutes/unmutes a player so they can not use chat
usage: mute|unmute [player]

Stops players from chatting. If no player specified it will show the list of muted players.
nick: Change your display name
usage: nick <name>
opms: sends a message to ops only
usage: opms [msg]

Sends chat messages that are only see by ops. Only works with ops that are on-line at the moment. If you no ops are on-line you should use the rpt command.
ops: Shows who are the ops on this server.
usage: ops
perm: temporarily change player's permissions
usage: perm <player> <dump|permission> [true|false]

This can be used to temporarily change player's permissions. Changes are only done in-memory, so these will revert if the disconnects or the server reloads. You can specify a permission and it will show it's value or if true|false is specified it will be changed. If you specify dump, it will show all permissions associated to a player.
players: Shows what players are on-line
usage: players
pluginmgr: manage plugins
usage: pluginmgr <subcmd> <plugin>

Manage plugins. The following sub-commands are available:
- pluginmgr enable <plugin>
  - Enable a disabled plugin.
- pluginmgr disable <plugin>
  - Disables an enabled plugin.
- pluginmgr reload <plugin>
  - Disables and enables a plugin.
- pluginmgr info <plugin>
  - Show plugin details
- pluginmgr commands <plugin>
  - Show commands registered by plugin
- pluginmgr permissions <plugin>
  - Show permissions registered by plugin
- pluginmgr load <path>
  - Load a plugin from file path (presumably outside the plugin folder.)
- pluginmgr dumpmsg <plugin> [lang]
  - Dump messages.ini.
- pluginmgr uninstall <plugin>
  - Uninstall plugin.
- pluginmgr feature <plugin> [[-|+]feature]
  - For plugins that have a features table in config.yml this will let you change those settings.
poptp: Returns to the previous location
usage: poptp
prefix: prepend prefix to chat lines
usage: prefix [-n] <prefix text>

This allows you to prepend a prefix to chat lines. To stop enter /prefix by itself (or prefix at the console). Usage examples:
- Send multiple /as player commands in a row.
- Start a private chat /tell player with another player.
- You prefer commands over chat: /prefix -n /
When prefix is enabled and you one to send just one command without prefix, prepend your text with <.
pushtp: Saves current location and teleport
usage: pushtp <player> [target]
query: query remote servers
usage: query [list|info|plugins|players|summary] [opts]

This is a query client that you can use to query other remote servers.

Servers are defined with the servers command.

Options:
- query list
  - List players on all configured query connections.
- query info <id>
  - Return details from query
- query players <id>
  - Return players on specified server
- query plugins <id>
  - Returns plugins on specified server
- query summary
  - Summary of server data
rcon: rcon client
usage: rcon <id> <command>

This is an rcon client that you can used to send commands to other remote servers identified by id.

You can specify multiple targets by separating with commas (,). Otherwise, you can use --all keyword for the id if you want to send the commands to all configured servers.

Use the servers command to define the rcon servers.
reg: Manage player registrations
usage: reg [subcommand] [options]

By default it will show the number of registered players. The following sub-commands are available:
- count
  - default sub-command. Counts the number of registered players.
- list [pattern]
  - Display a list of registered players or those that match the wildcard pattern.
- rm <player>
  - Removes player registration.
- since <when>
  - Display list of players registered since a date/time.
reop: Let ops drop priviledges temporarily
usage: reop [player]

Will drop op priviledges from player. Player can get op back at any time by enter reop again or by disconnecting.
rminv: Remove item from player's Inventory
usage: rminv [player] <item> [quantity]
rpt: report an issue to ops
usage: rpt [message|read|clear <all|##>]

Logs/reports an issue to server ops. These issues are stored in a a file which can be later read by the server operators. Use this when there are no ops on-line. If there are ops on-line you should use the opms command.

The following ops only commands are available:
- rpt read [##]
  - reads reports. You can specify the page by specifying a number.
- rpt clear <all|##>
  - will delete the specified report or if all, all the reports.
seearmor: Show player's armor
usage: seearmor <player>
seeinv: Show player's inventory
usage: seeinv <player>
servers: Manage peer server connections
usage: servers <add|rm|ls> [options]

This is used to manage the peer server definitions used by the RCON and QUERY modules.

Options:
- servers add <id> <host> [port] [--rcon-port=port] [--rconpw=secret] [# comments]
  - adds a new connection with id
- servers rm <id>
  - Removes peer id.
- servers ls
  - List configured peers.
servicemode: controls servicemode
usage: servicemode [on|off [message] ]

If on it will activate service mode. In service mode new players can not join (unless they are ops). Existing players can remain but may be kicked manually by any ops.
setarmor: Sets armor (even in creative)
usage: setarmor [player] [part] <quality>

This command lets you armor up. It can armor up creative players too. If no player is given, the player giving the command will be armored.

Part can be one of head, body, legs, or boots.

Quality can be one of none, leather, chainmail, iron, gold or diamond.
shield: player is protected from taking damage
usage: shield

This will toggle your shield status.
showtimings: Shows timing repots as reported by timings
usage: timings [t#]

If nothing specified it will list available reports. These are of the form of timings.txt or timings1.txt.

To specify a report enter t for timings.txt or t1 for timings1.txt.
skin: manage player's skins
usage: skin [player] [save|load|ls] [name]

Manipulate player's skins on the server. Sub-commands:
- skin ls
  - List all available skins on the server. Default command.
- skin [player] save <name>
  - Saves player's skin to name.
- skin [player] load <name>
  - Loads player's skin from name.
slay: Kills the specified player
usage: slay <player> [messsage] Kills a player with an optional message.
spawn: Teleport player to spawn point
usage: spawn
spectator|unspectator: toggle a player's spectator mode (DEPRECATED)
usage: spectator|unspectator [player]

This command will turn a player into an spectator. In this mode players can move but not interact (i.e. can't take/give damage, can't place/break blocks, etc).

If no player was specified, it will list spectators.
summon: Summons a player to your location
usage: summon <player> [message]
throw: Throw a player in the air
usage: throw <player> [force]
whois: Gives detailed information on players
usage: whois <player>

Commands scheduled by at and after will only run as long as the server is running. These scheduled commands will not survive server reloads or reboots. If you want persistent commands, it is recommended that you use a plugin like TimeCommander.

Module reference

blood-particles

Display particles when a player gets hit

broadcast-ft

Broadcast player's using FastTransfer

This listener module will broadcast when a player uses FastTransfer

broadcast-tp

Broadcast player teleports

This listener module will broadcast when a player teleports to another location. It also generates some smoke and plays a sound.

cmd-selector

Implements "@" command prefixes

Please refer to the CommandSelector section

join-mgr

Announce joining ops, and show server motd

This listener module will broadcast a message for ops joining a server.

Also, it will show the server's motd on connect.

repeater

Uses !! to repeat command with changes

If you want to repeat a previous command enter !! without any "/" in front. This works for commands and chat messages.

You can optionally append additional text to !! to do certain things:

!! number
- Will let you paginate output. For example, entering:
  - /mw ls
  - !!2
  - !!3
- This will start showing the output of /mw ls and consecutive pages.
!! /
- if you forgot the "/" in front, this command will add it. Example:
  - help
  - !!/
!! text
- Will append text to the previous command. For example:
  - /gamemode
  - !! survival john
- This will show the usage of survival, the next line will change the gamemode of john to survival.
!! str1 str2
- Will repeat the previous command replacing str1 with str2 Example:
  - /give player drt
  - !!drt dirt
- This will change drt into dirt.
!!^ text
- Will insert text at the beginning of the command.

Command Selectors

This adds "@" prefixes for commands. See Command Prefixes for an explanation on prefixes.

This only implements the following prefixes:

@a - all players
@e - all entities (including players)
@r - random player/entity

The following selectors are implemented:

c: (only for @r),count
m: game mode
type: entity type, use Player for player.
name: player's name
w: world

Configuration

Configuration is through the config.yml file. The following sections are defined:

broadcast-tp

world: world broadcast setting. If true, will broadcast teleports accross worlds.
local: local broadcast setting. This will broadcast teleports that go beyond this number.

cmd-selector

max-commands: Limit the ammount of commands generated by @ prefixes

features

This section you can enable/disable commands and listener modules. You do this in order to avoid conflicts between different PocketMine-MP plugins. It has one line per feature:

feature: true|false

If true the feature is enabled. if false the feature is disabled.

freeze-thaw

hard-freeze: how hard to freeze players. If true no movement is allowed. If false, turning is allowed but not walking/running/flying, etc.

join-mgr

adminjoin: broadcast whenever an op joins
servermotd: show the server's motd when joining

serverlist

This section configures peer servers. This can be used with rcon and query commands.

Permission Nodes

gb.cmd.pushpoptp (op): position stack
gb.cmd.freeze (op): freeze/thaw players
gb.cmd.get (op): get blocks
gb.cmd.gma (op): Switch gamemode to Adventure
gb.cmd.gms (op): Switch gamemode to Survival
gb.cmd.gmc (op): Switch gamemode to Creative
gb.cmd.gmspc (op): Switch gamemode to Spectator
gb.cmd.heal (op): heal players
gb.cmd.invisible (op): invisibility power
gb.cmd.invisible.inmune (disabled): can see invisible players
gb.cmd.mute (op): mute/unmute players
gb.cmd.opms: Send op only messages
gb.cmd.rpt: Report issues
gb.cmd.rpt.read (op): Read reported issues
gb.cmd.ops: Display ops
gb.cmd.permmgr (op): Manipulate Permissions
gb.module.cmdsel: use command selectors
gb.cmd.servicemode (op): service mode command
gb.servicemode.allow (op): login when in service mode
gb.module.repeater: use !! to repeat commands
gb.cmd.players: connected players
gb.cmd.prefix: Prefix command
gb.cmd.reop: Reop command
gb.cmd.reop.others (op): ReOp others
gb.cmd.slay (op): Allow slaying players
gb.cmd.whois (op): view players details
gb.cmd.whois.showip (op): view players IP address
gb.cmd.sudo (op): Run command as another user
gb.cmd.burn (op): Burn other players
gb.cmd.clearinv: clear player's inventory
gb.cmd.clearinv.others (op): clear other's inventory
gb.cmd.rminv: remove item from inventory
gb.cmd.rminv.others (op): remove item from other's inventory
gb.cmd.clearhotbar: clear player's hotbar
gb.cmd.clearhotbar.others (op): clear other's hotbar
gb.cmd.follow (op): lets you follow others
gb.cmd.followme (op): let others follow you
gb.cmd.regs (op): Manage player registrations
gb.cmd.query: Query command
gb.cmd.query.details: View details (info, plugins)
gb.cmd.query.players: View players
gb.cmd.query.players.showip: View players server IP
gb.cmd.query.list: Query List sub command
gb.cmd.togglechat: lets players opt out from chat
gb.cmd.togglechat.others (op): lets you toggle chat for others
gb.cmd.togglechat.excempt (op): chat-off players will always receive chats from these players
gb.cmd.togglechat.global (op): Can toggle chat for the server as a whole
gb.cmd.clearchat: Clear your chat window
gb.cmd.nick: Change display name
gb.cmd.entities (op): entity management
gb.cmd.rcon (op): Rcon client
gb.cmd.setarmor (op): Configure armor
gb.cmd.setarmor.others (op): Configure other's armor
gb.cmd.shield (op): Allow players to become invulnverable
gb.cmd.seearmor (op): View armor
gb.cmd.seeinv (op): View inventory
gb.cmd.skin (op): Manage skins
gb.cmd.skin.other (op): Manage other's skins
gb.cmd.spawn: Teleport to spawn
gb.cmd.spectator (op): Turn players into spectators
gb.cmd.servers (op): servers command
gb.cmd.servers.read (op): view server configuration
gb.cmd.servers.read.viewip (op): view server IP address
gb.cmd.servers.read.viewrcon (op): view rcon secrets
gb.cmd.servers.write (op): change server configuration
gb.cmd.alias (op): allow creating aliases
gb.cmd.after (op): access command scheduler
gb.cmd.blowup (op): Explode other players
gb.cmd.crash (op): crash dump management
gb.cmd.fly (op): flight control
gb.cmd.ftserver (op): Allow user to use Fast Transfer
gb.cmd.summon (op): summon|dismmiss command
gb.cmd.throw (op): Troll players
gb.cmd.timings (op): view timings report
gb.cmd.pluginmgr (op): Run-time management of plugins

Translations

This plugin will honour the server language configuration. The languages currently available are:

English
Spanish

You can provide your own message file by creating a file called messages.ini in the plugin config directory. Check github for sample files.

Additional Libraries

The following third party libraries are included:

[xPaw's MinecraftQuery](http://xpaw.me GitHub: https://github.com/xPaw/PHP-Minecraft-Query)

WIP and issues

Query:
- Queries are done in the main thread. Should be moved as an AsyncTask.
- Queries to the same server do not work.
- name resolution doesn't work reliably, use IP address as work around.

Changes

2.3.0: Update, new functionality and API
- Plugin loader will check server paths (include plugin folder)
- New plugin mgr sub command to dump messages.ini and to un-install.
- Doc updates.
- Updating libcommon stuff.
- WhoIs command now supports PurePerms
- Added aliases module
- New command rminv (@SeangJemmy)
- New reop command
- Configuration of Rcon and Query has changed
- Permissions are conditionally created (if the module is enabled)
- Adding a complete new API
2.2.7:
- Minor fix in Reg command
- Fixed bug in Command Selector (@Legoboy0215 and @SM11)
- Command selector: w=world (@SM11)
2.2.6: Bugfix
- gift command fixing
- ChatMgr crash fixing
- (@SM11) Edit tiles by location (instead of by id)
2.2.5:
- Fixed bugs
- CmdSelMgr: configure max
- gift command / broadcast
- Switched MPMU::itemName for ItemName::str
2.2.4:
- Re-formatted Queries (Requested by @Daniel123)
- FollowMgr check if player is flying before teleporting.
- Added /nick command (ChatMgr)
- Added Command Selector.
2.2.3: Multi-server
- Chat manager (Requested by @CaptainKenji17)
- Must have multi-server feactures:
  - Query command: let's you get info from servers in your network, like
    - number of servers on-line, number of players
    - show what players are on-line and on which servers
  - Rcon: let's you execute commands on remote servers using Rcon. The new --all switch lets you send the same command to all the servers in your network.
2.2.2:
- Default permission for /spawn changed from op to everyone.
- Whois shows clientId
- CmdAfterAt: list tasks and cancel them
- Sounds on teleport
- CmdRegMgr : show players registering since certain date
- Transfer broadcast : fixed bug
2.2.1: Misc fixes and new features
- New Command:
  - skin : manipulate skins
  - invis : make player invisible
- Fixes:
  - CmdAs : Fixed chat (for PM1.5)
  - CmdPlayers : Show name instead of displayname
  - CmdClearInv : Fixed checking permissions for others
2.2.0: Another update
- CmdWhois : Works with off-line players and also returns SimpleAuth details.
- CmdAfterAt : It nows work with fractional seconds
- New Commands:
  - perm : temporarily change permissions
  - reg : Manage player registration
- New module:
  - broadcast-ft: Like broacast-tp but for fast transfers
- Translation fixes, and other typos
- blood-particle: it also shows dust when the player dies
- broadcast-tp: show particles
2.1.0 : Regular update
- New commands:
  - gmspc - spectator mode
  - fly - enables flying for players in survival
  - clearhotbar - clear your hotbar
  - PluginMgr - manage plugins
  - Crash - manage crash dumps
- New modules:
  - broadcast-tp : Broadcast when a player teleports
  - blood-particles : blood particles (actually redstone) when players get hit.
- Command updates:
  - clearinv - can clear your own inventory
  - whois - returns more information
- Switched to my common library.
- Added translation, Spanish.
2.0.1: CallbackTasks
- Removed CallbackTask deprecation warnings
2.0.0: Re-factoring
- Re-factoring the code so it is more maintainable
- Removed unbreakable (moved to WorldProtect), CompassTP (moved to ToyBox), spawnitems, spawnarmor (moved to SpawnMgr).
- Added /prefix, /spawn, etc...
- /et subcommands: count and nuke, overall simplified entities.
1.4.1: maintenance
- Fixed a bug in showtimings.
- Fixed improper usage of the API in Removing Tile and Entities.
- Changed so unbreakable is off by default
1.4.0
- new commands: clearinv, rpt
- new listeners: unbreakable
- players : shows game mode
- et signX : new subcommand
- summon/dismiss commands
- push/pop teleport commands
1.3.0: More Commands
- Added !! / to repeater
- Added freeze and mute commands
- Added at and after commands
- Improved entities output
- Improved documentation
1.2.0 : Additional functionality
- Entities command
- servermotd module
- Fixed one warning
1.1.2 : Fixes
- showtimings, added clear operation.
- "/as": bug fixes
- Fixed typo in modules.yml
1.1.1 : More functionality
- Hide IP address from whois output
- New opms command.
- CompassTP: Prevent teleports to very nearby locations. Also, removed suffocation dangers... (this is traded with a risk of falling from high places...)
- Added the ability to teleport with a Compass.
- Added servicemode functionality
- showtimings command
- added seearmor, seeinv and get
- Improved the way how modules.yml is updated
- added shield command
- removed un-used old code/re-organized code.
- Command repeater
1.0.0 : First public release

Copyright

GrabBag
Copyright (C) 2015 Alejandro Liu
All Rights Reserved.

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.

Muirfield/GrabBag

GrabBag

Overview

Entity Management

Informational

Inventory Management

Player Management

Server Management

Teleporting

Trolling

Modules

Documentation

Command Reference

Module reference

blood-particles

broadcast-ft

broadcast-tp

cmd-selector

join-mgr

repeater

Command Selectors

Configuration

broadcast-tp

cmd-selector

features

freeze-thaw

join-mgr

serverlist

Permission Nodes

Translations

Additional Libraries

WIP and issues

Changes

Copyright